CSL DD loss of FFB mid corner
Today it happened the first time that I lost FFB for a very short time mid corner in ACC. Read about it on Reddit but never happened to me before.
Newest official drivers and recommended settings.
Today it happened the first time that I lost FFB for a very short time mid corner in ACC. Read about it on Reddit but never happened to me before.
Newest official drivers and recommended settings.
Comments
I have the same problem yesterday with ACC. in mid corner. Before that, only sporadical jolts.....
I fear this is getting worse....
Hi guys,
You should try to reseat the base-side QR. There must be no gap:
And before you retighten the collar, make sure it is aligned:
The bolt must be very tight, we recommend 15 Nm.
[Fanatec Community Manager]
Hi Guys - have either of you completed the reseat steps - I have the same issue but before I do that keen to know if this has solved the issue or not. My testing so far suggests an issue with the Booster Kit - with 8nm Booster - I have frequent issue with loss of ffb mid corner - the longer the corner with more resistance then the more likely the issue (this is in iracing btw) - I have just completed a first test without the booster and had no issue - BUT the steering was very light !!
I did a couple of hours tonight and can say the issue has decreased but not eliminated - still had a couple of occasions of losing ffb on a corner - much less impact and very short - likely because of reduced strain on the wheel - hence I plan to try the above solution
I just had it once but now I had also sudden jolts that others have reported. I have reseated everything and one new troubleshoot image that Fanatec is apparently sending is to check also the bolts inside wheel. I tightened them just a very small amount. Now the wheel gets recognized easier and I dont need to push it in like crazy. Maybe this fixes it now.
Hi - I have just today done both of those - re seated and tightened bolts - I had no issue in about 1 hour of testing tonight but will keep testing to see if it returns
Great!
Can you share the image?