Hello Maurice. Me again, a question about the DD1. I recently had 46° (degrees Celsius) motor temperature and 45° driver. I decided to take a break because it seemed too high and the fan was running at 1080rpm. Is that OK or is the temperature too high? Thank you for your answer.
PS: Is there a temperature that you should be worried about when it is reached?
I just upgraded to 457 with my CSL DD and F V2.5 because of the weak vibration motor issue. The issue seems to be fixed; but the shifting is started to get weird. It misses shifting sometimes and even the "left - right - up - down stick" registering multiple inputs or no inputs sometimes.
I just reverted back to 455 (and dowgrade the wheelfirmware aswell) and things are normal again (weak vibration motor is back, but shifting seems to be fine)
Yes, this is the way - as explained (with pictures) in chapter 6.2 of the official Driver & Firmware Instructions which are included with every driver download package.
Do you still having the issue? I find the same problems when upgrading my CSL DD with F V2.5 to 457. With 455 and firmware versions there is no problem. Correct?
I tried what you suggested yesterday but unfortunately did not work. That analysis page keeps popping up randomly while I play and when it does as you said the game freezes and also I now lose my feedback..Any other suggestion?
Yeah to be honest now I realized that for example when I play and down shift it pops up, I mean that some buttons of the wheel makes that to pop up and switch into one of the 4 pages..So if you understand it now better, should I contact the support?
"I downgraded to firmware 455, it tells me everything is up to date, but the steering wheel firmware says it needs updating. However, it doesn't update and stays at 0. What can I do?
Bonjour excusez-moi de vous déranger mais tout mes driver sont a jour sur mon Clubsport V3 il fonctionne parfaitement sur le panel fanatec mais ne fonctionne pas dans le jeux f1 2024 sur PS4 qu’est-ce que quelqu’un pourrais m’aider svp j’ai déjà re flasher et c’est toujours comme avant
It's not a fake message, it tells me to update to v8, and on the Fanatec Control Panel, it says 0! If I try to reflash, it seems to complete successfully, but it still shows 0. On the wheel's display, there's only an F, and if I connect it to the PS5, it doesn't show any signs of life!
Comments
Thanks my friend Maurice, haven't checked the manual for that to be honest! Thanks a lot !
Hello Maurice. Me again, a question about the DD1. I recently had 46° (degrees Celsius) motor temperature and 45° driver. I decided to take a break because it seemed too high and the fan was running at 1080rpm. Is that OK or is the temperature too high? Thank you for your answer.
PS: Is there a temperature that you should be worried about when it is reached?
The motor is designed to sustain temps of up to 110 C. 45 is perfectly fine and absolutely nothing to worry about.
You will never reach a temperature that you should be worried about.
lets say 75c should be fine for motor and should nothing happen
typical Class A coil is around 105°C , soo yeah maybe not let go in that high
I just upgraded to 457 with my CSL DD and F V2.5 because of the weak vibration motor issue. The issue seems to be fixed; but the shifting is started to get weird. It misses shifting sometimes and even the "left - right - up - down stick" registering multiple inputs or no inputs sometimes.
I just reverted back to 455 (and dowgrade the wheelfirmware aswell) and things are normal again (weak vibration motor is back, but shifting seems to be fine)
Another bug in 457?
How can I downgrade from 457 to 455? Do I uninstall the 457 driver from the PC and reinstall 455 and manually reflash?"
Yes, this is the way - as explained (with pictures) in chapter 6.2 of the official Driver & Firmware Instructions which are included with every driver download package.
Simone also try replacing the USB cable with the USB port and finally check your base power supply to see if the cables are well connected.
Hi Maurice! Is there a time-frame for the release of a new driver?
Interestingly enough i only get disconnections in pc compatibility mode in F1 2020 and in ps5-mode in gt7.
CS DD+, stock 457 driver
No ETA for anything atm, no.
Hi Michael,
Do you still having the issue? I find the same problems when upgrading my CSL DD with F V2.5 to 457. With 455 and firmware versions there is no problem. Correct?
Hi again Maurice,
I tried what you suggested yesterday but unfortunately did not work. That analysis page keeps popping up randomly while I play and when it does as you said the game freezes and also I now lose my feedback..Any other suggestion?
Thanks for your time!
Then it's time to contact the support as it seems like a hardware issue where some buttons of the wheel are randomly pressed.
Yeah to be honest now I realized that for example when I play and down shift it pops up, I mean that some buttons of the wheel makes that to pop up and switch into one of the 4 pages..So if you understand it now better, should I contact the support?
Yes, you should contact the support.
@Maurice Böschen, could you let Marcel know I’ve messaged him. It’s quite important he see’s the message. It’s about 460
I hope fanatec/corsair is working hard on the new xbox sdk.
Only in this way can I update my workstation with formula steering wheels.(458)
The Xbox SDK is already finished and shared with game devs.
I know it should be implemented with the next drivers
It is currently not being worked on for the immediate feature but still on the list for this year if all goes well.
So no, it wont be included in the next driver but hopefully should still be included later this year.
it would already be nice for 459 drivers
Will the next driver even be released this year?
Unlikely.
Yes.
Will that be improved 457 or another number?
"I downgraded to firmware 455, it tells me everything is up to date, but the steering wheel firmware says it needs updating. However, it doesn't update and stays at 0. What can I do?
Bonjour excusez-moi de vous déranger mais tout mes driver sont a jour sur mon Clubsport V3 il fonctionne parfaitement sur le panel fanatec mais ne fonctionne pas dans le jeux f1 2024 sur PS4 qu’est-ce que quelqu’un pourrais m’aider svp j’ai déjà re flasher et c’est toujours comme avant
Ignore it, its a false message shown which was fixed in driver 457.
Please post in English according to the forum rules if you want to get help.
Make sure the pedals are connected via RJ12 to your Fanatec Base and not via USB to the console.
It's not a fake message, it tells me to update to v8, and on the Fanatec Control Panel, it says 0! If I try to reflash, it seems to complete successfully, but it still shows 0. On the wheel's display, there's only an F, and if I connect it to the PS5, it doesn't show any signs of life!