Selected firmware V630 has been loaded successfully.
but when you open the application you download from the site (328) it does not recognize the base it recognizes it only if you press the ps4 mode which immediately switches to pc
thank you very much I managed to solve, now it works, thank you very much. I did not understand if when making an update the steering wheel must be connected or not ? because the problem was that it switched to ps4 mode and I had forgotten to put it in pc mode before turning it off after updating
hello i have csw 2.5 base and formula v2. Installed these drivers than new firmware update appeard so i did it.after this base wont start up, when i push statt button nothing happend amd when i try to recconect usb it doesnt recognize hardware :(
Hi. I’m having issues with the latest beta driver and wheelbase drive. With my formula V2 wheel everything works like a charm. When I put on my club sport wheel with the universal hub the follow things happen. The first time I connect it the clutch doesn’t work, I heave to take it of and reconnect it and then it’s fine. A new issue appeared after the latest wheelbase update. Only the X and A button work on the little black boxes (don’t know the correct name). On the hub itself everything works like it should. I’ve tried to reinstall the driver and even went back to the previous one because with that one it still worked. So I think it’s the wheelbase driver? Any ideas on what to do? Downgrade to a previous driver?
When arrived home i tried to turn off power supply and base now alive with bmw wheel.My PC diver now is 328 wheel base firmware 627 and wheel base motor 22.Whoch drivers do u reccomend its stable and safe for csw 2.5? I wanna try fanalab but iam worried to tried some beta drivers now
I enjoyed driver 365 but due to freezing issues and unable to use tuning menu on base i rolled back whilst awaiting a more stable driver Nd firmware . So above are my current settings for RFactor 2
Comments
with or without steering wheel on the base?
which drivers to install to avoid problems?
I did with.
try 328 then update again, im running 365 and everything works
I did this and what is written on it
CSL Elite PS4 Wheel Base detected
Device connected
Selected firmware V630 has been loaded successfully.
but when you open the application you download from the site (328) it does not recognize the base it recognizes it only if you press the ps4 mode which immediately switches to pc
thank you very much I managed to solve, now it works, thank you very much. I did not understand if when making an update the steering wheel must be connected or not ? because the problem was that it switched to ps4 mode and I had forgotten to put it in pc mode before turning it off after updating
hello i have csw 2.5 base and formula v2. Installed these drivers than new firmware update appeard so i did it.after this base wont start up, when i push statt button nothing happend amd when i try to recconect usb it doesnt recognize hardware :(
Does anyone have a solution to the hex file problem? DD2 base cannot upgrade to version 662. Default Hex file loading failed.
Can anyone help me please?
Hi. I’m having issues with the latest beta driver and wheelbase drive. With my formula V2 wheel everything works like a charm. When I put on my club sport wheel with the universal hub the follow things happen. The first time I connect it the clutch doesn’t work, I heave to take it of and reconnect it and then it’s fine. A new issue appeared after the latest wheelbase update. Only the X and A button work on the little black boxes (don’t know the correct name). On the hub itself everything works like it should. I’ve tried to reinstall the driver and even went back to the previous one because with that one it still worked. So I think it’s the wheelbase driver? Any ideas on what to do? Downgrade to a previous driver?
Please see first post in this thread. Your issue is listed as a known issue.
So you should downgrade the driver and firmware for now if you have a UHX to get the button island's working again.
Sorry Maurice. I must have missed that. Tnx for the reply and I will downgrade.
When arrived home i tried to turn off power supply and base now alive with bmw wheel.My PC diver now is 328 wheel base firmware 627 and wheel base motor 22.Whoch drivers do u reccomend its stable and safe for csw 2.5? I wanna try fanalab but iam worried to tried some beta drivers now
For CSW 2.5: v347 are stable
Well, I have a CSW 2.5 and V365 work very well. V347 worked well, too.
V365 works great for me as well on the 2.5. I use motor firmware 20 though because I can feel the notchy/gear teeth feeling at times with firmware 22.
I would like to ask for some advice - I am running a DD1 with F1 and Porsche EBM, on a PC and driver 356 with no problems.
Are there any advantages to upgrading to 365 ?
- it seems to me that all the changes are mostly for other wheel bases and console users - am I right in thinking this?
Somehow i did V365 to work and i have motor fw 22 so u recommend to dwngrade?
Running 365 and 22 everything smooth
Nothing changed regarding the feeling of the wheel, but there are some specific fixes for the driver.
The notchiness on the FW in 3.65 is so much worse on my CSW 2.5 and I want to roll back the motor firmware to 20 or 18.
Where are the hex file links or any instructions? I've searched and searched but no results (maybe make a sticky?)
Included in first post here
https://forum.fanatec.com/discussion/1058/fanatec-beta-driver-v347-for-csl-csw-all-wheels/p1
Waith, those FWs are signed for CSL ELITE PS4 not for his CSW
Please have a deeper look. It's for both.
I would suggest a driver unistall, install drivers that includes FW you want, then update drivers to v365 without updating FWs
Sorry, you are right, however my method is another way to do it too.
Does anyone have recommended settings for RF2 on the beta drivers?
Can u confirm you don’t see that flickering F logo upon startup and that you have no FFB disconnection in ACC for instance?
Can u confirm you don’t see that flickering F logo upon startup and that you have no FFB disconnection in ACC for instance
DD2
Sen Auto
Ffb 60
Sho 90
Abs off
For 100
Spring off
Dpr off
Ndp 32
Nfr 10
Fei 90
I enjoyed driver 365 but due to freezing issues and unable to use tuning menu on base i rolled back whilst awaiting a more stable driver Nd firmware . So above are my current settings for RFactor 2
Please give this test firmware a try, the one you need for your Formula V2 is in the RFORM V2 folder