I am using fanalab v1.69.4. Since last week, Maurice's led profiles have not matched in any car, I don't know if it's since I updated fanalab or since the last iracing maintenance. Previously they worked perfectly...
I have tried deleting all the fanalab profiles and reloading them (downloading them from the forum again), but I still can't get them to work correctly.
As some games released new cars and other games released updates where they changed some LEDs, here is my newest profile pack, ready for all the latest game updates!
To be used with latest FanaLab version 1.69.X versions and Driver 448 or newer.
Changelog:
Added new AMS2 profiles:
Formula Inter MG-15
VRC Chevrette (Mod car)
Added ABS / Wheel Lock FlagLEDs to the following AMS2 profiles:
BMW M4 GT4
BMW M6 GT3
Chevrolet Corvette C8 Z06
Ginetta G55 GT3
McLaren 720S GT3
Porsche 911 GT3 R
Porsche 911 GT3 Cup 3.8 & 4.0
Adjusted RPM LED values according to latest game update for the following AMS2 profiles:
Cadillac DPi-VR
Nissan GT-R Nismo GT3
Porsche 911 GT3 Cup 3.8 & 4.0
Porsche 911 GT3 R
Added new iRacing profiles:
Ray FF1600
Renault Clio
Added new F1 22 profile for the new Alfa Romeo F1 Team 2023 car
Removed Shift LED for the AMS2 Lotus 98T profile because in latest game patch the shift light is now an oil warning light
Corrected Shift LED color for the AMS2 Brabham BT62 profile
Improved the README fiiles with better instructions how to install and use my profiles
That however has nothing to do with my profiles...😅
That's exposed Telemetry (via Shared Memory) and needs to be implemented by the game developer into the Shared Memory, which they have not done yet so nothing FanaLab could show.
Small Hotfix Update for my latest profile pack from Tuesday because AMS2 changed the LEDs for the Porsche 911 RSR GTE car with their latest update (again):
Adjusted RPM LED values according to latest game update 1.4.6.1 from today for the Porsche 911 RSR GTE AMS2 profile
Hi Maurice, quick question: I´m using your latest profile for iracing´s BMW M4 GT3 and noticed that the rpm leds in the sim turn on from the extreme to the center but my PBME leds are turning on from left to right. Is is possible to replicate the sim´s leds behavior? Cannot recall if in older versions you made that. Thanks! (PS: I´ve already enabled telemetry and led support in falanab)
They finally did it. They finally updated the RPM LED pattern to match the real car - a thing I asked them to do for literally years.
Too bad they did not wrote this in any changelog, so I was not aware of this massive welcome change........
Immediately changed this in my profile, so here is another Hotfix of my profile pack.
Unfortunately the car still uses different RPM values for every gear which FanaLab does not support yet so the LEDs will only match in R, N and 1st gear and will then have a slight offset in the other gears but at least the general pattern is now correct again.
Changelog:
Changed RPM LED pattern of the iRacing BMW M4 GT3 profile to match the in game LEDs again after latest game update
Changed Pit Limiter LEDs of the iRacing BMW M4 GT3 profile from pink to green to match the in game LEDs again after latest game update
Added ABS FlagLEDs to the iRacing BMW M4 GT3 profile to match the newly added in game LEDs after latest game update
Comments
I have tried what you say and now it works perfectly. Thank you so much
Hi. When i try to "enable telemetry" it says "rfactor 2: Plugin copy failed (Ein Teil des Pfades "plugin/Podium..." konnte nicht gefunden werden".
What is wrong? Thanks in advance.
Which FanaLab Version are you using?
1.69.1
Anyone else having issues with that new feature auto loading profiles to a specific car in iRacing. Seems to only work sometimes :/
Which FanaLab Version are you using?
I am using 1.69.2 and have no problems with Fanalabs recognizing which car I am using and applying the correct profile.
Hi,
I am using fanalab v1.69.4. Since last week, Maurice's led profiles have not matched in any car, I don't know if it's since I updated fanalab or since the last iracing maintenance. Previously they worked perfectly...
I have tried deleting all the fanalab profiles and reloading them (downloading them from the forum again), but I still can't get them to work correctly.
Any suggestions?
Did you adjust the settings directly in iRacing. When in a session, option, option, external display and uncheck "use wheel shift indicator"?
As some games released new cars and other games released updates where they changed some LEDs, here is my newest profile pack, ready for all the latest game updates!
To be used with latest FanaLab version 1.69.X versions and Driver 448 or newer.
Changelog:
Have fun :)
Thank you Maurice!!!!
Woooooo that was fast! Thanks!
Thanks you so much Maurice for you job!
I just bought the Renault Clio and thought I didnt have a profile, but you have already done it! Fantastic, thank you Maurice!!
Hey Maurice,
um wie viel würdest du das FFB anpassen bei deinem Setup für das M4 GT3 Wheel?
Hi Maurice,
Do you have a cars list update for iRacing?
Thanks!
Coming in a new 1.69.5 Hotfix update either tomorrow or next week.
Thanks for the update Maurice. Do the new and updated profiles for AMS2 read the fuel mix as well?
What do you mean with "read the Fuel Mix"?
You can now change the fuel mix onboard as a button can be assigned to it. I notice on my wheelbase it always reads as 0.
That however has nothing to do with my profiles...😅
That's exposed Telemetry (via Shared Memory) and needs to be implemented by the game developer into the Shared Memory, which they have not done yet so nothing FanaLab could show.
Ah okay, no worries, hopefully someday then
Small Hotfix Update for my latest profile pack from Tuesday because AMS2 changed the LEDs for the Porsche 911 RSR GTE car with their latest update (again):
I have a question of the new profiles. The changes ar they Only for Ams2 en F1 2022 and iracing?
nothing changed for ACC ?
Correct.
A thanks
Hi Maurice, quick question: I´m using your latest profile for iracing´s BMW M4 GT3 and noticed that the rpm leds in the sim turn on from the extreme to the center but my PBME leds are turning on from left to right. Is is possible to replicate the sim´s leds behavior? Cannot recall if in older versions you made that. Thanks! (PS: I´ve already enabled telemetry and led support in falanab)
Jesus Christ :o
They finally did it. They finally updated the RPM LED pattern to match the real car - a thing I asked them to do for literally years.
Too bad they did not wrote this in any changelog, so I was not aware of this massive welcome change........
Immediately changed this in my profile, so here is another Hotfix of my profile pack.
Unfortunately the car still uses different RPM values for every gear which FanaLab does not support yet so the LEDs will only match in R, N and 1st gear and will then have a slight offset in the other gears but at least the general pattern is now correct again.
Changelog:
Wow that was fast! Thanks for the update. These little detials give an extra level of inmersion. Thanks again.
I love your work