1) Yes, handbrake can be used on PC (See changelog from the new Firmware 226 BETA)
2) Really??? The FFB in Project Cars is much much better than in Forza 5.... if you have correct settings in Project Cars. InForza5 ihavenodedicatedfeedbackwhichmakesthevehiclerearorfront axle.
1) I will have a look at the changelog then...but what I really meant was the handbrake working on the XBox One...
2) Yes really!! The Force Feedback in Forza 5 just works right out of the box...might need a few minor tweaks to adjust the strength, but that's about it. Quite odd you don't feel a difference in front- or rear-wheel drive (I assume you meant that) since I could even feel torque steering with the frontwheel-drive mini (I rarely drive frontwheel-driven cars...)
We should really have a race on the XBox with all people here soon! Just imagine having a race on Spa after all the hotlapping we have been doing ;P
I wanted to ask if it will be possible to use the older wheels when streaming the games of the XBox One on the Computer, because I read in an article that users will be able to use their 360 controller. If you do not know this PLEASE test it, as it would probably also save you some Fanatec customers.
PS: I do not have any XBox One yet so I can not test this, but if it would be possible I would buy the One to play FH2 and FM6.
@Toon...no mate...it essential to do that before patch 3.0...so that you can feel the difference in the refinement SMS did to improve ffb feel. I'm doing the Clio cup on ps4 career now...it's soooo much fun...
Can we please have the "ACL" autoclutch function from the CSR Elite? It was very usefull for Forza Motorsport on the Xbox360. Really missing it on the Xbox One!
Just see for XOne specifications Joseph...Google is your friend haha Anyone know what button combo to use to go from pc mode back to XOne mode with Fw 116 ? Double squares and X gives me PS3 mode and I can't seem to find the right combo.
Okay found it. You CAN use the double squares on the three button box, but you HAVE to use X,Y and B from the top box.
Just see for XOne specifications Joseph...Google is your friend haha Anyone know what button combo to use to go from pc mode back to XOne mode with Fw 116 ? Double squares and X gives me PS3 mode and I can't seem to find the right combo.
Okay found it. You CAN use the double squares on the three button box, but you HAVE to use X,Y and B from the top box.
Yeah but is the CSW v2 usb 3.0? I know X1 has 3.0 inputs
· BRF will not be shown anymore on CSW Base if CSP V3 are in manual calibration mode. BRF is for auto-calibration only!"
I cannot understand this change at all !!!
auto-calibration is completely useless in the current setup. Even at 100 BRF you reach the maximum brake force by simply touching the pedal without force. I you diminish the BRF-Value it is getting even worse.
manual-calibration-mode is the only chance to get a good feeling for the brake. If BRF is no longer available in this calibration mode, I see no reason why I shoud keep the CSP V3.
Why do you make such changes which worsen the product by far? adjustability is the main reason to buy the V3. Why do you worsen this by eliminating the BRF-Adjustabilty in manual-calibration mode?
I was wandering about the same thing...braking felt so much better when we could adjust that too!!! I think nobody uses auto calibration...hell I tried it in function test window...but the brake kept dancing up and down...so I had to do manual adjusting!!
Turning the BrfF to 100 on my pedals and i really have to Fullyl Push hard to get 100% Braking... you may need to check your pedals, your Game and wheel settings.
Turning the BrfF to 100 on my pedals and i really have to Fullyl Push hard to get 100% Braking... you may need to check your pedals, your Game and wheel settings.
Yea, brf @100 and load cell at 2.5 makes my heels almost snap!
Turning the BrfF to 100 on my pedals and i really have to Fullyl Push hard to get 100% Braking... you may need to check your pedals, your Game and wheel settings.
Yea, brf @100 and load cell at 2.5 makes my heels almost snap!
did you make manual calibration? then this is normal and as it should be. You can diminish the brf-value to "protect " your heels.
But in auto calibration you can push the brake pedal 2 cm and you have already the full brake force even at 100 BRF. There are many people complaining this for example at virtual racing.
Nat being the tester you are is the CSW v2 usb 3.0? Im trying to get a longer cable and want to make sure its going to be compatible
I'm not 100% certain, however to the best of my knowledge its USB 2.0
We did have some issues when connecting the CSWv2 to USB 3.0 ports initially (which has now been resolved) but I believe the base is only registered as a USB 2.0 device
Turning the BrfF to 100 on my pedals and i really have to Fullyl Push hard to get 100% Braking... you may need to check your pedals, your Game and wheel settings.
Yea, brf @100 and load cell at 2.5 makes my heels almost snap!
did you make manual calibration? then this is normal and as it should be. You can diminish the brf-value to "protect " your heels.
But in auto calibration you can push the brake pedal 2 cm and you have already the full brake force even at 100 BRF. There are many people complaining this for example at virtual racing.
When will FANATEC solve this problem?
Hi Marc
I didn't have a manual calibration, it was a default setup (auto calibration). I was using using firmware 112 on the pedals so it's possible that this is related to the newer firmware release, I will test this tomorrow and report back.
Edit I did encounter an issue where upon my pedals would only register 50% input on (PCars) even though they were fully depressed. However this was resolved by restarting the wheel and was only specific to PCars. I'll do some further testing tomorrow and compare both firmware.
Turning the BrfF to 100 on my pedals and i really have to Fullyl Push hard to get 100% Braking... you may need to check your pedals, your Game and wheel settings.
Yea, brf @100 and load cell at 2.5 makes my heels almost snap!
did you make manual calibration? then this is normal and as it should be. You can diminish the brf-value to "protect " your heels.
But in auto calibration you can push the brake pedal 2 cm and you have already the full brake force even at 100 BRF. There are many people complaining this for example at virtual racing.
When will FANATEC solve this problem?
Hi Marc
I didn't have a manual calibration, it was a default setup (auto calibration). I was using using firmware 112 on the pedals so it's possible that this is related to the newer firmware release, I will test this tomorrow and report back.
Edit I did encounter an issue where upon my pedals would only register 50% input on (PCars) even though they were fully depressed. However this was resolved by restarting the wheel and was only specific to PCars. I'll do some further testing tomorrow and compare both firmware.
I have had that issue as well and like Nat said, restating the wheel while game is booted resolves the issue. Hopefully patch 3.0 solves it.
After I upgraded to new firmware today, on V3 pedals, I lost the BRF function and I have to push the brakes almost trough the rig to fully compress them...I kinda regret having them updated!!! How do I get them to auto calibrate ? I've tried the enable bla bla bla square on and off...but all I got was my brake output was dancing up and down, so I had to manually calibrate the brake!!
After I upgraded to new firmware today, on V3 pedals, I lost the BRF function and I have to push the brakes almost trough the rig to fully compress them...I kinda regret having them updated!!! How do I get them to auto calibrate ? I've tried the enable bla bla bla square on and off...but all I got was my brake output was dancing up and down, so I had to manually calibrate the brake!!
Hmmm, are you saying that if you leave the pedals as "default" (ie. don't try to "or" enable manual calibration) you lost the brf function?
This sounds like you have a manual calibration stored/cached somewhere, did you try re flashing the wheel (to removing all stored calibrations) and taking it from there?
I'll refash the pedals and wheel tomorrow IF I can find the time..or else the weekend. @Joseph, I'll contact you by XOne message to get you my ffb settings asap.
I'll refash the pedals and wheel tomorrow IF I can find the time..or else the weekend. @Joseph, I'll contact you by XOne message to get you my ffb settings asap.
I'll test my replacements tomorrow too when they arrive, and I'll let you know how it goes I added you on PSN, however I've not updated my subscription so online racing is XBO only fir me until there is a reason to subscribe on the PS4 (ie. When they fix pcars)
I'll refash the pedals and wheel tomorrow IF I can find the time..or else the weekend. @Joseph, I'll contact you by XOne message to get you my ffb settings asap.
Thanks bud. We need to get the group of us some track time together once Nat gets her gear back.
I'll refash the pedals and wheel tomorrow IF I can find the time..or else the weekend. @Joseph, I'll contact you by XOne message to get you my ffb settings asap.
Thanks bud. We need to get the group of us some track time together once Nat gets her gear back.
Agreed! Fingers crossed my pedal issues will be resolved tomorrow, then I only have 1 damper issue left to resolve and apart from some minor niggles, I think that's it So next week I'll be good to go (except for 1 damper) but that won't hold me back :P
I'll refash the pedals and wheel tomorrow IF I can find the time..or else the weekend. @Joseph, I'll contact you by XOne message to get you my ffb settings asap.
Thanks bud. We need to get the group of us some track time together once Nat gets her gear back.
Agreed! Fingers crossed my pedal issues will be resolved tomorrow, then I only have 1 damper issue left to resolve and apart from some minor niggles, I think that's it So next week I'll be good to go (except for 1 damper) but that won't hold me back :P
I might just need to pick up a damper for the accelerator.
Im Getting Random Issues with the New FW windows 7/644bit and on PS4 with PCars Where the Pedals only Reads Half Throttle/ Clutch/ Brakes.... it just randomly Happens when i plug the wheel in to the PC... I shut the wheel Off and power back on ithe Pedals Come back to Full Most of the time.... on PCars i Reloaded the game and wheel and it was ok again... it just happens at Random... any 1 else have this happen? EDIT: It has Happend a Few Times Since ive updated the Pedal FW with FW 226
ImbGetting Random Issues with the New FW windows 7/644bit and on PS4 with PCars Where the Pedal only Reads Half Throttle/ Clutch/ Brakes.... it just randomly Happens when i plug the wheel in to the PC... I shut the wheel Off and power back on ithe Pedals Come back to Full Most of the time.... on PCars i Reloaded the game and wheel and it was ok again... it just happens at Random... any 1 else have this happen?
Hey bud. It is an issue with PCars. Gonna test it with the new 3.0 update to see if it's been resolved. I'm still on 223
Comments
I agree with a race at spa, that will be great
I'm doing the Clio cup on ps4 career now...it's soooo much fun...
And a race at Spa..I'm in!!!
Anyone know what button combo to use to go from pc mode back to XOne mode with Fw 116 ? Double squares and X gives me PS3 mode and I can't seem to find the right combo.
Okay found it. You CAN use the double squares on the three button box, but you HAVE to use X,Y and B from the top box.
I think nobody uses auto calibration...hell I tried it in function test window...but the brake kept dancing up and down...so I had to do manual adjusting!!
Yea, brf @100 and load cell at 2.5 makes my heels almost snap!
I'm not 100% certain, however to the best of my knowledge its USB 2.0
We did have some issues when connecting the CSWv2 to USB 3.0 ports initially (which has now been resolved) but I believe the base is only registered as a USB 2.0 device
Hi Marc
I didn't have a manual calibration, it was a default setup (auto calibration). I was using using firmware 112 on the pedals so it's possible that this is related to the newer firmware release, I will test this tomorrow and report back.
Edit
I did encounter an issue where upon my pedals would only register 50% input on (PCars) even though they were fully depressed. However this was resolved by restarting the wheel and was only specific to PCars. I'll do some further testing tomorrow and compare both firmware.
How do I get them to auto calibrate ? I've tried the enable bla bla bla square on and off...but all I got was my brake output was dancing up and down, so I had to manually calibrate the brake!!
[b]ClubSport Wheel Base V2 Servo EU
ClubSport Steering Wheel Porsche 918 RSR EU
ClubSport Pedals V2 EU[/b]
Also detection of the full brake is 95% on the drivers test.
Hmmm, are you saying that if you leave the pedals as "default" (ie. don't try to "or" enable manual calibration) you lost the brf function?
This sounds like you have a manual calibration stored/cached somewhere, did you try re flashing the wheel (to removing all stored calibrations) and taking it from there?
@Joseph, I'll contact you by XOne message to get you my ffb settings asap.
I'll test my replacements tomorrow too when they arrive, and I'll let you know how it goes
Agreed!
Fingers crossed my pedal issues will be resolved tomorrow, then I only have 1 damper issue left to resolve and apart from some minor niggles, I think that's it
So next week I'll be good to go (except for 1 damper) but that won't hold me back :P
EDIT: It has Happend a Few Times Since ive updated the Pedal FW with FW 226
Hey bud. It is an issue with PCars. Gonna test it with the new 3.0 update to see if it's been resolved. I'm still on 223