ich würde das Kit auch gerne testen. Falls Ihr noch Tester braucht. Würde mich freuen, wenn dadurch das Stocken, Ruckeln und andauernde Schmieren ein Ende hat.
I have upgraded to v3 Pedals back in September and I am still very unhappy with the annoying, "stuttering" feeling of the brake pedal. An RMA was initated, I sent it back to the support team but the stuttering feeling didn't go away for me. I have always suspected the PU foams to be the root cause of this issue. Now I see that you are offering a brake performance kit, i.e. new PU foams. I would be more than happy to test it for you and hopefully can give you the feedback that the stuttering has finally gone.
I just got my pedals with damper on the brake back from your service center.
I had sent them to your service because I could not get rid of the crunchy feel on the brake until now. Unfortunately it seems the problem is still the same so I´m a little disappointed. But I could test it only since 3 days now and have to see how it develops. I have tested different ways of lubricate already before (the technical vaseline, the dry lube that grimey dog supposed here and some balistol lube) several times already. The best result for me till now was with the balistol, but after 3-4 weeks it still comes back the lite stuttering feel on the brake.
So I really would be happy if I could test out the new brake performance kit.
Now that new products are being launched and all, could any of Fanatec employee's respond my e-mail sent on October 21st as a response to technical support? Or, at least, acknowledge its reception?
I thought customer support was improving, but some of my latest experiences make me question if it's not going back to what it was a few years ago...
Hi Antonio,
how did you contact the support team on the 21. October? We did not receive any ticket from you through the support system.
Just ordered my V3s. None will refuse to test a damper *cough*. I can get you feedback from the more amateur side of the scale, since I never had high-end pedals before (just G25).
it would be nice to test the Brake Mod. I´m using the V3 Pedals and i am a member of the Team 3 wide-Motorsport. I start with Simracing in 2006. At the Moment we are starting at the VEC series and Nords24. I´m also driving F1 and our favourit Plattform is rF2.
Hi Thomas, I just ordered a V3 set incl Shifter and I would love to test this mod, I also ordered the Damper kit. I hope to receive it next week, as it is all on stock.
I want to replace my T500 pedals with Basher brake mod.
My experience comes from the early days, with GP1,2,3 etc, and not to forget the good old GPL.
Now I own practically all good sims that are available on the market today.
Hallo Fanatec-Team, morgen kommen meine CSP V3 an und ergänzen meine CSW V2 mit Shifter 1.5 und BMW bzw. F1 Wheel wohl perfekt. Würde gerne die Dämpfer testen und berichten.
I'd love to test the Brake Performance Kit. I'll order the Pedals now. I could even do a video review in english and/or german if you like.
I'm still happy with my slightly modified V2s. Never had any serious problems with the loadcell etc. But lubricating the elastomer every now and then to have a smooth break pedal is a pain in the ass sometimes. ;-)
Would be interesting to test some differen elastomers with different progression. The new ones probably won't absorb the lubricant since they're not MCU-elastomers.
Hi guys: you know me well, tough as nails but sincere and appreciative. you guys know that there wont be more sincere and honest and straightforward review that mine so send those things to me and you guys will have the best review in no time!!!!
I moved so my new address is 1511 greenmeadow ct , Bowling Green Kentucky 42104. send everything you guys need to be reviewed and I wont disappoint .regards
Comments
thx
ich wäre ein BetaTester aus Hessen! Besitze CSP v3 mit Dämpfer-Kit.
Mit freundlichen Grüßen
Carsten
ich würde das Kit auch gerne testen. Falls Ihr noch Tester braucht. Würde mich freuen, wenn dadurch das Stocken, Ruckeln und andauernde Schmieren ein Ende hat.
Gruß,
Michael
Wenn noch a Platzerl im Testteam frei is, bin i jo sowas von dabei .
Frank
I just got my pedals with damper on the brake back from your service center.
I had sent them to your service because I could not get rid of the crunchy feel on the brake until now. Unfortunately it seems the problem is still the same so I´m a little disappointed. But I could test it only since 3 days now and have to see how it develops. I have tested different ways of lubricate already before (the technical vaseline, the dry lube that grimey dog supposed here and some balistol lube) several times already. The best result for me till now was with the balistol, but after 3-4 weeks it still comes back the lite stuttering feel on the brake.
So I really would be happy if I could test out the new brake performance kit.
Thank you.
Armin
I should receive my v3 pedals tomorrow (Scheduled by UPS for 20/11/15) So, I would love to be a beta tester for the new v3 Brake Performance kit
My v3 pedals arrive Monday.
If it helps I'm a accredited ISEB tester. So I know how to log defects & observations.
Mark..
Hello Fanatec Team,
it would be nice to test the Brake Mod. I´m using the V3 Pedals and i am a member of the Team 3 wide-Motorsport. I start with Simracing in 2006. At the Moment we are starting at the VEC series and Nords24. I´m also driving F1 and our favourit Plattform is rF2.
It would be nice to here something from you.
Peter
morgen kommen meine CSP V3 an und ergänzen meine CSW V2 mit Shifter 1.5 und BMW bzw. F1 Wheel wohl perfekt.
Würde gerne die Dämpfer testen und berichten.
Gruß
Marco
Would be happy to beta test this product. Currently have V3 pedals with the damper kits, which are good but could be improved.
I'd love to test the Brake Performance Kit. I'll order the Pedals now.
I could even do a video review in english and/or german if you like.
I'm still happy with my slightly modified V2s. Never had any serious problems with the loadcell etc. But lubricating the elastomer every now and then to have a smooth break pedal is a pain in the ass sometimes. ;-)
Would be interesting to test some differen elastomers with different progression. The new ones probably won't absorb the lubricant since they're not MCU-elastomers.
Would be happy to hear from you.
Greets Ralf