Next week there is a new driver update I heard with a new trayapp included and there is also coming a new app for mobile i think, so better wait for this and when it's there remove all previous drivers including trayapp and install the new driver and tick the box trayapp when installing and also download the new app for mobile. This will solve most problems
That's good news. I'll just wait until the new driver arrives. I find this function so cool that I don't want to do without it any more. I'll be happy when it works again :)
I'm a bit careful with non-official download sources when a download link is shared in the forum.
It's not non-official it's a legit fanatec trayapp download, I downloaded this also because i had problems with the tuning menu but now it is fixed because of this. That's why i think that it can help with your problem also. It's not for sure if the new update will come next week
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App (0.1.12) only finds my PC with the Fanatec Tray App (0.43.0.21) when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 454 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App. I use ACC 1.9.5 and iRacing as racing software.
- Wheel Base Model: Podium Wheel Base DD1
- Steering Wheel Model: Clubsport Steering Wheel Formula V2.5
- iPhone 14 Pro: IOS 17
- Driver Version: 454.
- Intel i7 12700 KF
- MSI RTX 4090 24 GB
- 32 GB RAM
- Windows 11 Pro
It should also be noted that the latest updates are installed on all of the above devices. The complete Fanatec hardware (wheel+wheelbase+pedals) are properly recognized in the games (ACC + iRacing). In an earlier version of the iPhone Fanatec app, both "ITM" and "Tuning" worked perfectly.
I have been unable to link my iOS phone to my PC that's running the driver with the tray app. Looking for assistance. On the phone app I enter the ip address shown in the tray app from the PC. It shows there are no compatible devices found. Is there a solution? Thanks
Are you using the Fanatec App with Android or iOS? iOS
Which mobile device do you use? iphone 14
Wheel Base Model (product ID): ...CSL DD plus boost kit
Steering Wheel Model (product ID): ....McLaren V2
Driver Version: ....454
Base FW Version: ....1.1.10.6
Motor FW Version: ....1.0.3.2
Wheel FW Version: ....47
FanaLab Version: ....2.01.12
Tuning Menu settings File is attached
Driver/FanaLab installed on C: drive or else? all installed on C:
You can create driver log files on the settings page of the Fanatec Control Panel file is attached
If you report an issue, please provide the following information:
Are you using the Fanatec App with Android or iOS? Android 5
Which mobile device do you use? Samsung Note 3 Neo
Wheel Base Model (product ID): CSW 2.5
Steering Wheel Model (product ID): Porsche 918 RS
Driver Version: 455
Base FW Version: newest
Motor FW Version: newest
Wheel FW Version: newest
FanaLab Version: not in use
Tuning Menu settings
Driver/FanaLab installed on C: drive or else? C: (default installation folder)
You can create driver log files on the settings page of the Fanatec Control Panel
The new driver 455 with the new Fanatec app for Android and PC did not fix the problem. The TrayApp crashes on the Windows computer as soon as the Android is connected. The display then continues to show "Waiting for Data". But then nothing happens. The TrayApp also no longer responds, even if you have disconnected again. I use the Game ACC and Automobilista 2 on Windows 11 23H2
When using my phone as an ITM hud. Everything works except the actual dashboard display screens. All the other ones including the temperature the torque Etc are just fine but the dashboard just says waiting for data the whole time when I'm in iracing. Any ideas? I can change all the settings on my dd1 without a problem too.
Are you using the Fanatec App with Android
Which mobile device do you use? LG velvet
Wheel Base Model (product ID): ...DD1
Steering Wheel Model (product ID): .... Podium endurance World Challenge Edition
Driver Version: ....454
Base FW Version: .... most recent
Motor FW Version: .... most recent
Wheel FW Version: .... most recent
FanaLab Version: ....2.01.12
Tuning Menu settings File is attached
Driver/FanaLab installed on C: drive or else? all installed on C:
I'm not near my computer at the moment but I'll update this once I get my rig set up today.
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App (0.1.12) only finds my PC with the Fanatec Tray App (0.43.0.21) when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 454 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App. I use ACC 1.9.5 and iRacing as racing software.
- Wheel Base Model: Podium Wheel Base DD1
- Steering Wheel Model: Clubsport Steering Wheel Formula V2.5
- iPhone 14 Pro: IOS 17
- Driver Version: 455
- Intel i7 12700 KF
- MSI RTX 4090 24 GB
- 32 GB RAM
- Windows 11 Pro
It should also be noted that the latest updates are installed on all of the above devices. The complete Fanatec hardware (wheel+wheelbase+pedals) are properly recognized in the games (ACC + iRacing). In an earlier version of the iPhone Fanatec app, both "ITM" and "Tuning" worked perfectly.
Correct, as explained in the post I have linked you need to uninstall the "old" driver 455 and re-install the re-uploaded new 455 version with the new TrayApp version 0.43.0.43.
Unfortunately I haven't received any feedback yet, so I'm posting this again
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App only finds my PC with the Fanatec Tray App when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 455 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App.
- Wheel Base Model: Podium Wheel Base DD1 (latest drivers)
We actually just pushed the new Mobile App update v0.1.13+108 to Google and Apple for review, afterwards it gets pushed to the respective AppStores. Usually Google is a bit faster than Apple with the review of App updates but maybe you should see the App update right in time for christmas :)
Changelog:
Fixed 3-digit tire temps being cut-off.
Fixed DRI hint text which showed the hint text of SEN.
Updated the network discovery framework to fix 5 GHz WiFi issues.
Added new color logic for the RevBar: When the motor RPM threshold is > = 95% then the RevBar color now turns into a solid light-blue color and when the motor RPM threshold is > = 99% then the RevBar color now turns into a blinking red color.
Thank you! It's working again :). I don't know why, but the installation routine or uninstallation of the driver 455 is really causing problems. Never really had any problems, but this time it was kind of bitchy.
I had to cancel the uninstallation because it just wouldn't go any further. I rebooted and lo and behold, the driver was uninstalled after all. And then I installed the new version of the 455.
hi i have been having this problem for the last 3 weeks and cant figure it out, i have used the app before and its awesome but after one of the updates the fanatec tray app no longer shows the ip im supposed to enter on the app so i cant connect and use the app. it just says exit there is no ip in the tray icon anymore. anybody have this issue? please help everything, is updated i reistalled multiple times i even reinstalled windows idk what is happening everything else on my pc runs great. the screenshot is what shows when u right click fanatec tray app
remember my post from 20 December, I downloaded the new MobileApp v.0.1.13 and it only works in 2.4 GHZ mode. This means that I have to switch my PC from 5 to 2.4 GHZ to be able to use the app. Maybe it will work with the next update. By the way, all drivers are up to date, if you have any questions I am available, also as a beta tester.
Did you tested the newest Mobile App version 0.1.13+108? Because that one includes a fix for it. It is fix "into the blue" because nobody could reproduce the issue so it might be that this fix does not fix it for you. In that case the Dev will need to have another look at the issue next year to try another fix "into the blue".
Comments
Here is the Zip link of the Trayapp (follow instructions above here): https://admin.forum.fanatec.com/uploads/638/D1C8TF6RBT1Y.zip
Sorry idk how to share this TrayApp 0.41 Zip maybe you can ask Maurice Böschen if he can put the TrayApp 0.41.zip on this page
hmm, but are you talking about Fanatec applications? I have it installed... currently version 0.43
Next week there is a new driver update I heard with a new trayapp included and there is also coming a new app for mobile i think, so better wait for this and when it's there remove all previous drivers including trayapp and install the new driver and tick the box trayapp when installing and also download the new app for mobile. This will solve most problems
That's good news. I'll just wait until the new driver arrives. I find this function so cool that I don't want to do without it any more. I'll be happy when it works again :)
I'm a bit careful with non-official download sources when a download link is shared in the forum.
It's not non-official it's a legit fanatec trayapp download, I downloaded this also because i had problems with the tuning menu but now it is fixed because of this. That's why i think that it can help with your problem also. It's not for sure if the new update will come next week
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App (0.1.12) only finds my PC with the Fanatec Tray App (0.43.0.21) when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 454 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App. I use ACC 1.9.5 and iRacing as racing software.
- Wheel Base Model: Podium Wheel Base DD1
- Steering Wheel Model: Clubsport Steering Wheel Formula V2.5
- iPhone 14 Pro: IOS 17
- Driver Version: 454.
- Intel i7 12700 KF
- MSI RTX 4090 24 GB
- 32 GB RAM
- Windows 11 Pro
It should also be noted that the latest updates are installed on all of the above devices. The complete Fanatec hardware (wheel+wheelbase+pedals) are properly recognized in the games (ACC + iRacing). In an earlier version of the iPhone Fanatec app, both "ITM" and "Tuning" worked perfectly.
Does anyone have an idea ??
I have been unable to link my iOS phone to my PC that's running the driver with the tray app. Looking for assistance. On the phone app I enter the ip address shown in the tray app from the PC. It shows there are no compatible devices found. Is there a solution? Thanks
If you report an issue, please provide the following information:
The new driver 455 with the new Fanatec app for Android and PC did not fix the problem. The TrayApp crashes on the Windows computer as soon as the Android is connected. The display then continues to show "Waiting for Data". But then nothing happens. The TrayApp also no longer responds, even if you have disconnected again. I use the Game ACC and Automobilista 2 on Windows 11 23H2
Thx, the issue got reproduced. It happened on old Belt bases where the TrayApp crashes when it gets asked for the Firmware version check.
Will be fixed in the next version.
When using my phone as an ITM hud. Everything works except the actual dashboard display screens. All the other ones including the temperature the torque Etc are just fine but the dashboard just says waiting for data the whole time when I'm in iracing. Any ideas? I can change all the settings on my dd1 without a problem too.
I'm not near my computer at the moment but I'll update this once I get my rig set up today.
Update to driver 455 which includes a new TrayApp which fixes the ITM issue you experience.
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App (0.1.12) only finds my PC with the Fanatec Tray App (0.43.0.21) when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 454 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App. I use ACC 1.9.5 and iRacing as racing software.
- Wheel Base Model: Podium Wheel Base DD1
- Steering Wheel Model: Clubsport Steering Wheel Formula V2.5
- iPhone 14 Pro: IOS 17
- Driver Version: 455
- Intel i7 12700 KF
- MSI RTX 4090 24 GB
- 32 GB RAM
- Windows 11 Pro
It should also be noted that the latest updates are installed on all of the above devices. The complete Fanatec hardware (wheel+wheelbase+pedals) are properly recognized in the games (ACC + iRacing). In an earlier version of the iPhone Fanatec app, both "ITM" and "Tuning" worked perfectly.
Does anyone have an idea ??
The issue is fixed with the new TrayApp version included in the re-uploaded driver 455 from today:
https://forum.fanatec.com/discussion/comment/109675#Comment_109675
So this means we have to delete old 455 driver and download the re-uploaded one, or does a update do the trick?
Correct, as explained in the post I have linked you need to uninstall the "old" driver 455 and re-install the re-uploaded new 455 version with the new TrayApp version 0.43.0.43.
👍 btw Does beta drivers get updates, 455 is beta wright? I guess not because we have to download a new version, but I do had to ask.
455 is not beta, it is now RC (Release Candidate) and be official in the next few days.
Unfortunately I haven't received any feedback yet, so I'm posting this again
My FritzBox 6690 Cable transmits in 5 + 2.4 GHZ mode and my iPhone 14Pro and my PC connect to the same network via WLAN at 5 GHZ. My iPhone Fanatec App only finds my PC with the Fanatec Tray App when I use the 2.4 GHZ mode of the FritzBox. Then "Tuning" works immediately in the iPhone app, i.e. my Podium Wheel Base DD1 and the Clubsport steering wheel Formula V2.5 with the current driver 455 are recognized. If I switch to "ITM" mode, Fanatec Tray App switches off, i.e. no connection to the iPhone Fanatec App.
- Wheel Base Model: Podium Wheel Base DD1 (latest drivers)
- Steering Wheel Model: Clubsport Steering Wheel Formula V2.5 (latest drivers)
- iPhone 14 Pro: IOS 17.2.1 (latest drivers)
- Fanatec Driver Version: 455 (latest drivers)
- Fanatec App: 0.1.12 (latest drivers)
- Fanatec Tray App 0.43.0.43 (latest drivers)
- Windows 11 Pro (latest drivers)
It would be nice to get an answer, even if the answer is that it will be patched in one of the next releases
That issue should be fixed with the next Mobile App update.
Good to hear that there will be a solution!
is there already an approximate timing when an update for the Mobile App will come?
We actually just pushed the new Mobile App update v0.1.13+108 to Google and Apple for review, afterwards it gets pushed to the respective AppStores. Usually Google is a bit faster than Apple with the review of App updates but maybe you should see the App update right in time for christmas :)
Changelog:
Great app!
My DD1 is hidden behind my monitor, so I absolutely love being able to see data from the display on my phone :)
Hi,
Thank you! It's working again :). I don't know why, but the installation routine or uninstallation of the driver 455 is really causing problems. Never really had any problems, but this time it was kind of bitchy.
I had to cancel the uninstallation because it just wouldn't go any further. I rebooted and lo and behold, the driver was uninstalled after all. And then I installed the new version of the 455.
FYI: The aforementioned new MobileApp update v0.1.13+108 is now live on the Google Play Store and Apple App store :)
hi i have been having this problem for the last 3 weeks and cant figure it out, i have used the app before and its awesome but after one of the updates the fanatec tray app no longer shows the ip im supposed to enter on the app so i cant connect and use the app. it just says exit there is no ip in the tray icon anymore. anybody have this issue? please help everything, is updated i reistalled multiple times i even reinstalled windows idk what is happening everything else on my pc runs great. the screenshot is what shows when u right click fanatec tray app
Hi Maurice
remember my post from 20 December, I downloaded the new MobileApp v.0.1.13 and it only works in 2.4 GHZ mode. This means that I have to switch my PC from 5 to 2.4 GHZ to be able to use the app. Maybe it will work with the next update. By the way, all drivers are up to date, if you have any questions I am available, also as a beta tester.
Did you tested the newest Mobile App version 0.1.13+108? Because that one includes a fix for it. It is fix "into the blue" because nobody could reproduce the issue so it might be that this fix does not fix it for you. In that case the Dev will need to have another look at the issue next year to try another fix "into the blue".