Te hacen falta 4 arandelas de nylon M8 de 40 mm de diámetro y 4 mm de grosor además de 2 arandelas M10 de 25 mm de diámetro. Yo voy a poner 8 arandelas M8 de 40 mm x 2 mm, no las encuentro de 4 mm y las pondré en pareja.
En este enlace tienes los dos tamaños en Nylon la M8 son 20 unidades y la M10 30 unidades, parece que tienen buena pinta en lo que a la calidad se refiere.
Since we're on a new page I thought it would be best to reattach the diagrams with some possible combinations.
As it seems the large M8 40mm x 4mm nylon/plastic spacers are hard to find I've made a diagram for possible ways of re-using the default plastic spacers that come with the V2 pedals instead (not tested any of these though), but keep in mind the default V2 spacers are concave and designed for Fanatec's 25mm diameter elastomers not the 30mm Heusinkveld ones, so best to fill in those gaps with a 25mm M10 spacer or washer.
Thanks to the previous poster for finding some alternative spacers on Aliexpress. These seem to be a good low cost option for both the M8 40mm main spacers and the M10 25mm spacers used to fill the concave areas at the top and bottom of the stack. As they are 2mm thick instead of 4mm, more combinations could be possible and it should be easier to squeeze the stack back into position by just adding or removing a spacer.
Buenas, ya he recibido los espaciadores de AliExpress, tienen la calidad que esperaba y ajustan perfectamente las dos medidas y no hay que poner ninguna arandela de metal y así desgastar menos el eje central.
Thanks for the update and pictures of the actual Aliexpress spacers fitted with the elastomers. Probably the perfect way of doing the mod now for anyone who wants to try it out.
Comments
Te hacen falta 4 arandelas de nylon M8 de 40 mm de diámetro y 4 mm de grosor además de 2 arandelas M10 de 25 mm de diámetro. Yo voy a poner 8 arandelas M8 de 40 mm x 2 mm, no las encuentro de 4 mm y las pondré en pareja.
En este enlace tienes los dos tamaños en Nylon la M8 son 20 unidades y la M10 30 unidades, parece que tienen buena pinta en lo que a la calidad se refiere.
Saludos.
Since we're on a new page I thought it would be best to reattach the diagrams with some possible combinations.
As it seems the large M8 40mm x 4mm nylon/plastic spacers are hard to find I've made a diagram for possible ways of re-using the default plastic spacers that come with the V2 pedals instead (not tested any of these though), but keep in mind the default V2 spacers are concave and designed for Fanatec's 25mm diameter elastomers not the 30mm Heusinkveld ones, so best to fill in those gaps with a 25mm M10 spacer or washer.
Thanks to the previous poster for finding some alternative spacers on Aliexpress. These seem to be a good low cost option for both the M8 40mm main spacers and the M10 25mm spacers used to fill the concave areas at the top and bottom of the stack. As they are 2mm thick instead of 4mm, more combinations could be possible and it should be easier to squeeze the stack back into position by just adding or removing a spacer.
Buenas, ya he recibido los espaciadores de AliExpress, tienen la calidad que esperaba y ajustan perfectamente las dos medidas y no hay que poner ninguna arandela de metal y así desgastar menos el eje central.
Thanks for the update and pictures of the actual Aliexpress spacers fitted with the elastomers. Probably the perfect way of doing the mod now for anyone who wants to try it out.