WRC Generations (Xbox One/Series)

Dominic BrennanDominic Brennan Member, Administrator
in WRC

General Notes:

  • The settings below are considered to be reasonable baseline values for WRC Generations (Xbox One/Series). They might not suit all tastes and driving styles, but they are a good starting point.
  • For some cars, the 'Max wheel angle' setting could be more comfortable at 540.
  • In order to apply the suggested settings correctly, it is important to assign both the Tuning Menu values AND the suggested In-Game settings together.
  • These settings assume you have updated all firmware from the latest Fanatec Driver package (available on the front page of the Fanatec website).
  • If you cannot access all the settings shown below, you are probably in the Standard Tuning Menu. To switch to the Advanced Tuning Menu, first enter the menu (short-press the Tuning button once), then press and hold the Tuning button for about four seconds.
  • You may see additional Tuning Menu settings depending on your connected devices. These additional settings are not relevant to force feedback, and are not listed here.
  • The settings for the CSL DD / Gran Turismo DD Pro are suitable for 5 Nm and 8 Nm (Boost Kit 180).
  • The settings for the Podium Wheel Bases assume you are in High Torque Mode. In Low Torque Mode, the same settings can be used, but with a higher FF value.


Podium Wheel Base DD1 / DD2

Tuning Menu Settings:

  • SEN Auto
  • FF 50
  • FFS Peak
  • NDP 20
  • NFR Off
  • NIN Off
  • INT 1
  • FEI 100

In-Game Settings:

  • Max wheel angle: 360
  • Overall force: 75
  • Self aligning torque: 100
  • Tyre load: 5
  • Self centre: 50
  • Recentre force: 25
  • Ground surface: 10
  • Overall vibration: 50
  • All other vibration settings: 100


CSL DD / Gran Turismo DD Pro

Tuning Menu Settings:

  • SEN Auto
  • FF 100
  • FFS Peak
  • NDP 20
  • NFR Off
  • NIN Off
  • INT 1
  • FEI 100

In-Game Settings:

  • Max wheel angle: 360
  • Overall force: 90
  • Self aligning torque: 100
  • Tyre load: 5
  • Self centre: 50
  • Recentre force: 25
  • Ground surface: 10
  • Overall vibration: 50
  • All other vibration settings: 100


Belt-driven wheel bases:

Tuning Menu Settings:

  • SEN Auto
  • FF 100
  • DRI Off
  • FEI 100

In-Game Settings:

  • Max wheel angle: 360
  • Overall force: 90
  • Self aligning torque: 100
  • Tyre load: 5
  • Self centre: 50
  • Recentre force: 25
  • Ground surface: 10
  • Overall vibration: 50
  • All other vibration settings: 100


Sign In or Register to comment.