Calculation to adapt FFB settings to DD1: Tuning Menu FFB value of the Base multiplied with 1.25 (=> FFB 60 x 1.25 = FFB 75). No need to adjust in game settings.
Thank you, I read it correctly. However, I don't understand if I have to do a new calculation for my DD2 database or if your profiles were created for and with a DD2 database
Good evening, on my end Fanalab crashes when I click on the game picture in the game profile list. I updated everything (Fanalab, firmware etc...) but nothing worked. Any ideas on what could cause this issue ? (I have a CSL DD 8nm if that can help)
Hello. help me please. I install new 456 driver fanatec, and then install fanalab 2.01.28. I use wheelbase dd1 podium with ClubSport Steering Wheel RS and leds(rev) and led display stopped working in le mans ultimate. With fanatec driver 455 and fanalab 2.01.26 everything worked great. how can I fix this? help me please
Devs are available to help. I can ask to reach out to you, or you can reach out to them through the discord of Le Mans Ultimate. One of the main devs is German too.
I click the two green buttons in profile tab but leds don't worked((( with 2.01.26 when I started le mans ultimate on wheel display I see LM, now its don't work(( maybe I need to reinstall fanalab and driver?
What you experienced was the native LED support from the game, not FanaLab.
Only 2.01.28 now supports LMU and when the LEDs dont work for you after you clicked the two green buttons then your LED RPM values are wrong and you need to adjust them accordingly.
Yes when you want to use FanaLab LEDs then it's up to you to configure the correct RPM values. Otherwise it's possible that the default values are too high for the currently driven car, resulting in no LEDs lighting up.
In the meantime I got the RPM values by myself now with 6 hours of work over the weekend...
Now I just need to find a proper FFB with which I am happy, which is currently a difficult task as I dont like what I feel atm.... But I was also not a fan of the rF2 FFB so that's no big surprise.
The CSL Elite with the mosaic pattern front does not support the Tuning Menu in the software. Only the CSL Elite PS4 Base does (so the one with the plain brushed front).
Comments
Good morning,
I would like to contact you because I have a question about your driving profiles (Maurice Böschen) on iRacing.
I see that the profiles are marked for 15 Nm.
I have a DD2 at 25 Nm
What should I modify in order to best match your profiles?
I'm sorry because my English is quite bad.
Thank you a thousand times for your help and all the work you do for these profiles.
Bruno
Hey.
Just have a look into the README files, everything is explained (in detail) in there.
Calculation to adapt FFB settings to DD1: Tuning Menu FFB value of the Base multiplied with 1.25 (=> FFB 60 x 1.25 = FFB 75). No need to adjust in game settings.
Thank you, I read it correctly. However, I don't understand if I have to do a new calculation for my DD2 database or if your profiles were created for and with a DD2 database
I'm sorry for my ignorance
I have made profiles for both a P DD2 and a CS DD+ as you can see in the folder structure of the profile pack.
They can be used "as is" or fine-tuned by the user if they prefer different settings.
Perfect, I understood (finally) thank you!
I had doubts because the names of the .PWS files are written like this in the DD2 directory:
iRacing [legacy] Audi R8 LMS GT3-39 15Nm.pws
and it's the same as in the CS DD + folder
Thats because I use an FFB value of 60% for my DD2 profiles, which equals 15 Nm ;)
Yes thanks . It took me a little too long to understand but it's good now :-)
Thank you so much
Thanks Maurice and team for the LMU Fanalab workaround :)
Good evening, on my end Fanalab crashes when I click on the game picture in the game profile list. I updated everything (Fanalab, firmware etc...) but nothing worked. Any ideas on what could cause this issue ? (I have a CSL DD 8nm if that can help)
There was a hotfix https://forum.fanatec.com/discussion/comment/120000/#Comment_120000 that should fix the problem. Not yet on the frontpage.
If i only play on my Xbox console is Fanalab any usefull to me, or can i remove it from my laptop ?
fanalab is pc only. no reason to have it if your only on a console
Hi Maurice,
Can you please update the main title to say v2.01.28 etc etc as when I'm sending users here they "can't find" the 2.01.28 :)
Just send them the link to the specific comment, i.e. https://forum.fanatec.com/discussion/comment/120000/#Comment_120000
Thank you very much sir 👍🏼
It would be amazing if you got these. I also am trying to get RPM values from the game devs...not sure how successful that will be.
Hello
Can I use FANALAB 2.01.28 with DRIVER 450 ?
CSL DD 8 nm
CS Pedal V3
CS SW F1 Esports V2
CS SW RS
No.
Hello. help me please. I install new 456 driver fanatec, and then install fanalab 2.01.28. I use wheelbase dd1 podium with ClubSport Steering Wheel RS and leds(rev) and led display stopped working in le mans ultimate. With fanatec driver 455 and fanalab 2.01.26 everything worked great. how can I fix this? help me please
Click the two green buttons in the game profile Tab in Fanalab to Enable Telemetry and Enable Fanalab support.
Devs are available to help. I can ask to reach out to you, or you can reach out to them through the discord of Le Mans Ultimate. One of the main devs is German too.
I click the two green buttons in profile tab but leds don't worked((( with 2.01.26 when I started le mans ultimate on wheel display I see LM, now its don't work(( maybe I need to reinstall fanalab and driver?
thank you for your quick response to the message
2.01.26 didnt supported LMU.
What you experienced was the native LED support from the game, not FanaLab.
Only 2.01.28 now supports LMU and when the LEDs dont work for you after you clicked the two green buttons then your LED RPM values are wrong and you need to adjust them accordingly.
understood, i.e. Should I configure and calibrate in the leds section?
Yes when you want to use FanaLab LEDs then it's up to you to configure the correct RPM values. Otherwise it's possible that the default values are too high for the currently driven car, resulting in no LEDs lighting up.
THX!
In the meantime I got the RPM values by myself now with 6 hours of work over the weekend...
Now I just need to find a proper FFB with which I am happy, which is currently a difficult task as I dont like what I feel atm.... But I was also not a fan of the rF2 FFB so that's no big surprise.
I should have something ready mid-week I guess.
Really thank you so much 😊
Hi,
I update the firmware of my csl elite and fanalab too yesterday, but the tunning menu is unavailable on fanalab now.
Could you give me the process to unlock the menu.
Thank
Which version of the CSL Elite?
The CSL Elite with the mosaic pattern front does not support the Tuning Menu in the software. Only the CSL Elite PS4 Base does (so the one with the plain brushed front).