New uploads of my car profiles for the just new FanaLab Version 1.60.6 which uses a completely new Profile Structure Version 2.0 for the new Tuning Menu v2 of driver 431 where the order of FFS and MPS was changed.
Only compatible with the aforementioned new FanaLab version 1.60.6+ and Driver 431+. Do NOT use with any older FanaLab or Driver version!
Additional note: This version still has a bug with Fuel logic where the value is 1L wrong. As my profiles all use this Display Feature to show Fuel level once the value lowered 1L with Prio this issue affects all my profiles. So if you use the profiles out-of-box just remember to add 1L to the shown value (for example Display shows F39 when in game the fuel level reached 39,99L which means effectively you have still 40L available, not 39L).
I recently started using the CSL DD with the CS Wheel Formula V2.5. Is it possible to use your profiles for it. If so, is there also the possibility to convert as with DD1 and DD2 (which factor to use)?
ok, thx for answer. but only for being sure: the csw has has 8.5nm and as far as i understood this thread, it is usable with your profiles. and the CSL DD with BK180 has 8nm.... or is this not the main reason, that the profiles are not usable with csl dd.
sorry, if its a dumb question - im a noob in this topic...
Maurice how do you decide what FFB for each car to set? I love your ACC profiles and I am starting to play AMS2 and I was thinking how to adjust FFB for other cars, other than those which you have given. For example for formulas or other random cars. You do it by the feel or there is some technic or tools that can be used?
Of course, but it was released when I slept, otherwise you would have got it even before you wrote your message ;)
Sooo. Here new iRacing car profile pack with the 3 new Cars from 2022 Season 01 Build: Honda Civic Type R, Hyundai Elantra N TC and of course the Mercedes-AMG F1 W12 E Performance.
As I cant edit or delete anymore... Fine-tuned the Hyundai a bit more. Ignore this upload above, this one here in this new post is the final upload of car profiles for the 3 new cars in iRacing :)
I have read that the latest versions of Fanalab have an automatic adjustment system that depends on the simulator. I am referring to the configuration profiles.
In theory this would be the most 1:1 system with the simulator, right?
Do we know which simulators are compatible with this system?
That's a driver feature, completely unrelated to Fanalab and therefore completely unrelated to profiles.
It's not implemented from ANY game yet, it's a future thing for 2022 or 2023 and beyond where game Developers can push recommended FFB settings they think should be used with their Simulators and which the user can not change in that Auto Setup Mode. But as said, something which might become relevant sometime in the future.
Hi Maurice, where can I find the correct profile for CSL DD 8nm for the W12 in iRacing. Ive checked the last post of you’rs and FanaLab says its not compatible with my device
I've recently been using your profiles and they have made a big difference. I really like them a lot when playing Iracing/Ferrari GT3 Evo. I was using them with my DD1 Podium with F1 (blue) wheel. However, I just purchased the McLaren GT3 V2 wheel and although it feels ok and I expected some differences, the FFB doesn't feel like it has the same level of detail. I wasn't sure if you have done any testing with that wheel or had some suggestions on any settings changes when using this wheel vs. my F1?
Do you have the clubsport quick release or the simplyfied plastic quick release? With the plastich quick release the wheel is not able to unlock full torque in the podium base. olny, i beleieve, 35% of it
New FanaLab Version 1.61.3 is out and of course I have also updated my profiles to fully support the new version :)
If you want to use my profiles I highly recommend to use this profiles / adapt them to your liking for best compatibility as there were some changes made to FanaLab which made my old profiles (partially) incompatible in regards to ACP.
Comments
New uploads of my car profiles for the just new FanaLab Version 1.60.6 which uses a completely new Profile Structure Version 2.0 for the new Tuning Menu v2 of driver 431 where the order of FFS and MPS was changed.
Only compatible with the aforementioned new FanaLab version 1.60.6+ and Driver 431+. Do NOT use with any older FanaLab or Driver version!
Additional note: This version still has a bug with Fuel logic where the value is 1L wrong. As my profiles all use this Display Feature to show Fuel level once the value lowered 1L with Prio this issue affects all my profiles. So if you use the profiles out-of-box just remember to add 1L to the shown value (for example Display shows F39 when in game the fuel level reached 39,99L which means effectively you have still 40L available, not 39L).
Hi Maurice,
I recently started using the CSL DD with the CS Wheel Formula V2.5. Is it possible to use your profiles for it. If so, is there also the possibility to convert as with DD1 and DD2 (which factor to use)?
THX a lot! Appreciate your effort and work.
Gernot
You can use the LED settings, sure.
But the Tuning Menu can not be adjusted to a low end DD, no.
So only the Led settings can be adopted. The rest must be adjusted for the CSL DD yourself.
Do you then use the basic settings in the same way for all vehicles or should you adjust them individually?
ok, thx for answer. but only for being sure: the csw has has 8.5nm and as far as i understood this thread, it is usable with your profiles. and the CSL DD with BK180 has 8nm.... or is this not the main reason, that the profiles are not usable with csl dd.
sorry, if its a dumb question - im a noob in this topic...
thx! gernot
On any lower end base you run FFB at 100 all the time anyway so there is nothing to adjust.
For such bases you can run one Basic setting for every car.
Maurice how do you decide what FFB for each car to set? I love your ACC profiles and I am starting to play AMS2 and I was thinking how to adjust FFB for other cars, other than those which you have given. For example for formulas or other random cars. You do it by the feel or there is some technic or tools that can be used?
Thank you!
Purely by how I think the car feels best :)
Love your profiles and recommend them to everyone.
Do you fell it's neccessary or have any plans on updating the profiles after the ACC 1.8 update?
Keep up the good work!
New Profile for the BMW M4 GT3 in ACC which changes the Pit Limiter LEDs according to latest Game Patch 1.8.5 where they changed them.
@Maurice Böschen, I know it's just been released today but any plans on a profile for the new Mercedes W12?
Not sure if you run open wheelers or not hence the question.
Cheers
Of course, but it was released when I slept, otherwise you would have got it even before you wrote your message ;)
Sooo. Here new iRacing car profile pack with the 3 new Cars from 2022 Season 01 Build: Honda Civic Type R, Hyundai Elantra N TC and of course the Mercedes-AMG F1 W12 E Performance.
As I cant edit or delete anymore... Fine-tuned the Hyundai a bit more. Ignore this upload above, this one here in this new post is the final upload of car profiles for the 3 new cars in iRacing :)
Howdy!
I have read that the latest versions of Fanalab have an automatic adjustment system that depends on the simulator. I am referring to the configuration profiles.
In theory this would be the most 1:1 system with the simulator, right?
Do we know which simulators are compatible with this system?
what do you mean?
There is no automatic system in place.
Maybe I misunderstood this feature but I do have it in my driver available.
That's a driver feature, completely unrelated to Fanalab and therefore completely unrelated to profiles.
It's not implemented from ANY game yet, it's a future thing for 2022 or 2023 and beyond where game Developers can push recommended FFB settings they think should be used with their Simulators and which the user can not change in that Auto Setup Mode. But as said, something which might become relevant sometime in the future.
Cool thanks for the info Maurice!
LOL Thanks mate, I knew it was night time for you but it was middle of the day for me down here so had to get the post in before I went to bed. :-)
Appreciate the updates as always
Cheers
Hi Maurice,
Do you intend to provide us with the new Mercedes F1 profile for iRacing?
By the way, no issue so far with 432beta.
Best regards,
Oli
Have a look few posts above..... ;)
Thank you Maurice.🤣
Hi Maurice, where can I find the correct profile for CSL DD 8nm for the W12 in iRacing. Ive checked the last post of you’rs and FanaLab says its not compatible with my device
That's correct. The Tuning Menu settings are Podium DD exclusive.
Only the LED settings are generally compatible with every base.
Hi Maurice,
I've recently been using your profiles and they have made a big difference. I really like them a lot when playing Iracing/Ferrari GT3 Evo. I was using them with my DD1 Podium with F1 (blue) wheel. However, I just purchased the McLaren GT3 V2 wheel and although it feels ok and I expected some differences, the FFB doesn't feel like it has the same level of detail. I wasn't sure if you have done any testing with that wheel or had some suggestions on any settings changes when using this wheel vs. my F1?
It's a bigger wheel so it needs higher FFB so just increase FFB and you are good to go.
Thanks so much Maurice! I'll give that a try.
Do you have the clubsport quick release or the simplyfied plastic quick release? With the plastich quick release the wheel is not able to unlock full torque in the podium base. olny, i beleieve, 35% of it
Hi Mart,
Yes, I'd ordered the McLaren wheel with the optional QR-1 (not using the plastic simplified lite QR) so I should be good.
New FanaLab Version 1.61.3 is out and of course I have also updated my profiles to fully support the new version :)
If you want to use my profiles I highly recommend to use this profiles / adapt them to your liking for best compatibility as there were some changes made to FanaLab which made my old profiles (partially) incompatible in regards to ACP.