FanaLab 2.01.45 Release (prev .35 rc) - Post your Feedback here
Marcel Pfister
Member, Administrator
How to report issues:
- List which hardware, driver and firmware you are using
- Cross check with other settings, games and wheels to see if it's a general issue or specific with to a game, wheel or setting.
- Is it happening with just one game (which one) or all you tried.
- Go into detail how we can reproduce the issue.
- Post screenshots or videos if needed.
- In case of a FanaLab crash, use the "Collect Logs" feature under "Settings" and upload them here.
Changelog of FanaLab 2.01.45 (since 2.01.32)
- Added F1 24 support.
- Added picture for ClubSport Steering Wheel F1® 2023™ in the alternative flyout.
- Added picture for ClubSport Steering Wheel F1® PS5™ in the alternative flyout.
- Added new CarsList for ACC (new: Ford Mustang GT3).
- Added new CarsList for AMS2 (new: Stock Car 2024 IDs).
- Added new CarsList for iRacing (new: Chevrolet Corvette Z06 GT3.R, Ford Mustang GT3, Street Stock - Casino M2, Street Stock - Eagle T3; changed: Street Stock - Panther C1).
- Added new CarsList for R3E (new: BMW M2 CS Racing 2021, BMW M4 GT4 (G82), BMW M8 GTE).
- Added new CarsList for LMU (new: BMW M Hybrid V8, Lamborghini SC63, 2024 Peugeot 9X8; changed: a lot of IDs and car names according to latest game update).
- Fixed LEDs not working in iRacing when variable RPM value is lower than constant idle RPM value.
- Fixed unresponsive area on "Exe detection" in add custom game dialog.
- Fixed BME ITM Screen not disabled when ITM is disabled in the UI.
- Fixed high occurence of missed shifts when FanaLab is running.
- Another approach to fix ITM freezes after some time of driving.
- UI now stores FAV-ID on disabling ITM in the UI and restores the UI on enabling.
- Updated the Telemetry support list PDF file.
Compatible Driver Version
Download
This discussion has been closed.
Comments
Long time no update but it's finally time for a new profile pack for P DD and CS DD(+) with todays new FanaLab version 2.01.35 which added F1 24 support and some new CarsLists!
Changelog:
The profiles are only compatible with FanaLab V2.01.32 or newer and are incompatible with older Lab versions.
As always: Hope you like and have fun with them :)
Thanks 😊💪🏻
Also many thanks for your tireless work on these, Maurice ! 👊
Thanks Maurice for your constant adjustments and additions to the profiles of our favourite racing games. Much appreciated.
Huge thanks to Marcel and Maurice for the updates.
I really apreciate it. 😊👍️
Thanks for the work aswell.
Is there any news for the normal CS DD Base instead of CS DD+? Is it enough to put the FFB Setting inGame a little bit higher ? So like the same difference between Podium DD1 and Podium DD2 ?
I made the profiles for CS DD+, as the + is stronger than the non-plus, you just have to use them as is as you cant make the profiles stronger than the FFB strength of 100 which I use for every profile.
Maurice!!…
I cannot get fanalab to work with F1 24. I set the telemetry in game according to your read me in the profiles file, I hit both green buttons in fanalab, I have all the latest firmwares and the latest driver package. And I use the EA app so I manually selected the exe for the game in fanalab. The only thing I have left to check is if I did indeed download the latest fanalab version. If I did then I’m out ideas on what’s wrong lol.
Please upload the game profile tab page of the F1 24 profile in FanaLab as well as the in-game telemetry settings, most likely some setting is wrong or you indeed use an old version with F1 24 added as a custom game instead of the provided one maybe?!
Thanks for continuing to provide these profiles Maurice!
Is the intent to use the CS DD+ profiles for the CSL DD as well?
Thanks!
Not tested. Could work, could not work, idk.
In general my profiles are not made for weaker DD bases like CSL DD.
Understood! Thanks for the fast reply! 👍️
I have a question about the new fanalab i just installed it and use the new profiles from Maurice but the leds of the new goed does not work in acc. How can I fix that? All other cars work well
Which new goed?
Sorry the ford gt3 leds does not work in acc
Weird, LEDs in general are independent from a car except when using CDALP, but when CDALP is not working then you just have to bind the profile to the car manually, or you load the profile manually.
Otherwise I have no idea whats wrong on your end because, as said, LEDs in general work with any car......
Maurice thanks for all your car profile and works you do for us.
I see for iracing only a car profile for cup series.. do you have already works for Xfinity and truck too ??
No, I dont drive these cars so I wont spent time to make profiles for such cars.
hey maurice, is there an update coming for Le Mans Ultimate? Carlist an Profile for the BMW Hypercar? 😬thanks
The game update is not even out yet lol...😅
Of course at some point there will be an update with a new CarsList for LMU, yes.
Surely not today though as we dont have access to LMU updates in advance so we have to wait like everyone else until the update drops to add support for it.
Ah ok. Thanks for the Info
The leds on the ford gt3 do not do it at all but only the rpm value. The pit limiter led and the speed and the gears and fuel works great.
But not the rpm
when i have cockpit cam on the car in the game also the rpm does not work
Is it a bug?
As said yesterday, dont know what's wrong on your end, working fine for me and LEDs in general are independent of a car and work globally. Most likely you just use wrong RPM values .
Please post links to pictures of the LED Tab in FanaLab with the profile loaded.
Hello Maurice, you have any configuration of the forza motorsport? Dd pro 8nm (in Pc)
Thank you.
why can i not uplaod a picture failure code 403
Because the Forum is broken since sometime in March and it also wont be fixed. Therefore I asked for links to pictures which you need to upload somewhere else.
oke i do not no how that works so never mind with the ford it is the only car in acc with no rpm leds and i looked into the other profiles and the settings from the led are the same
You just need to upload the picture to any picture uploading website and then post the link to the picture here.
Without a picture of your LED page in FanaLab its pretty much impossible to help you.
Or you tell us which RPM values you are using.
Here are the correct RPM values of the profile and when you load this profile then the LEDs WILL work, impossible that they do not work.
PS: Dont wonder, I can upload pictures because I use a special admin forum which is not broken.
you mean someone disabled allowing posting the images. as http 403 error by default means that