Fanatec Podium Module Rally issue
Siegfried Striffler
Member
1. When I change something in the setup and push the Button again it shows the last option menue, and does not chance anymore.
2. Speed or gear will not display.
3. Button mapping is not wright in some Games.
I tried driver Version 4.52 and 4.54, with both of them the same. The Module is on an universal hub v2.
What can I do now?
Comments
You cant do much other than waiting for future firmware updates which will fix these known Firmware issues.
Thx Maurice,
Do you know If the next driver update has also a New firmware for the Button Module Rally?
Thanks a lot
The next driver wont have a new BMR FIrmware, however it has a new Base Firmware where some BMR related issues should be fixed (not all though).
Do you know what all the issues are? I had mine on Podium hub and it was not recognizing the wheel when I swap wheels. I could get it to work be powering down the DD1 and then on again. So i attached it to the Clubsport base, which i don't really like and that fixed the recognition issue, but it seems to get confused as to what to display on the BMR and what to display on the OLED.
I have been waiting for driver updates and hoping that will fix it, but without a working experience to compare to I don't really know what i should expect.
I know what all the issues are, yes.
However there is no known issue of the Module not being recognized when you attach the wheel. This should always work (and it does for me on both my Podium DD and CS DD+ so I would have zero idea why its not recognized everytime for you.
That the OLED shows weird stuff is known.
It will need quite quite some time and several driver releases next year to fix them all.
Thanks for the response. I am currently assuming the podium hub is not working properly. Hopefully the rest gets sorted out soon.
Very disappointing to read of the issues with the rally module,what problems can i expect on Xbox using the clubsport v2 hub,thanks
@ maurice Boschen. I know what all the issues are, yes
please can you tell me the known issues on Xbox using the rally module with a v2 hub,this will save me alot of time and frustration when trying to set it up,thank you in advance
I just received my new Podium Button Module Rally and installed it to an existing Podium Hub. After Installation I updated all my equipment to latest firmware of Driver Version 454.
My new Rally wheel setup doesn't work with sequential shifters. I use 2 Fanatec ClubSport Shifters SQ V 1.5 at the same time. First one is plugged in Shifter1 of a DD Pro wheel base used as H-pattern shifter next to my seat for older cars; second shifter is plugged in Shifter2 of the wheel base used as sequential shifter next to the wheel as used in modern WRC cars. When I'm trying to shift up or down with Shifter 2 nothing happens. When I shift into any gear of Shifter 1 gear is changed successfully. When I switch Shifter 1 to sequential shifting also nothing happens.
When I change my wheel to a Podium Button Module Endurance wheel everything works fine: sequential shifting of Shifter 2, H-pattern and sequential shifting of Shifter 1.
Sequential Shifting does not work with any Button Module if "map shifters" in driver menu isn't activated.
Problem can be reproduced with all possible combinations of shifter plugs and modes including using just one shifter at the same time as long Podium Button Module Rally is used.
Before installation of the Podium Button Module Rally I removed a ClubSport Button Cluster Packet and ClubSport Magnetic Paddle Module previously used with. With this Setup everything worked fine, too. So it cannot be the Podium Hub that is producing the problem.
Setup used:
PlayStation 5
DD Pro 8Nm (PS-Mode)
ClubSport Pedals V3
2x ClubSport Shifter SQ V1.5 (Shifter1 = H-pattern, Shifter2 = sequential)
2x ClubSport Handbrake V1.5 (only one plugged in at the same time depending on Shifter used)
Podium Hub + Podium Button Module Rally => no sequential shifting
Podium Hub + ClubSport Button Cluster Packet + ClubSport Magnetic Paddle Module => everything works fine
Podium Hub + Podium Button Module Endurance + Podium Advanced Paddle Module => everything works fine
ClubSport Steering Wheel Formula V2 + Podium Advance Paddle Module => everything works fine
ClubSport BMW GT2 V2 => everything works fine
Problem can be reproduced in Gran Turismo and EA WRC with every plug in combinations and modes of the shifters. In EA WRC sequential shifting cannot be applied in controls menu as long as Podium Button Module Rally is used. As soon as I switch to a different wheel everything works fine as long as Podium Button Module Rally isn't used.
Sequential Shifting is recognized by Fanatec Control Panel when Podium Button Module Rally is attached. After checking I didn't change anything except PS Mode and plugged the whole setup into my PS5. Sequential shifting does not work. Changed the wheels and everything works fine again. So it's a PlayStation related issue with Podium Button Module Rally.
It would also be great if Driver Menu supported multiple shifters at the same time. When Shifter1 is plugged in I cannot see Shifter2. I plugged them in separately to make sure everything works fine and is recognized. I also calibrated both Shifters, so this can also not be the problem.
Have I mentioned that modern Rally without sequential shifting is pointless? 🤔😅
Button module Rally on my clubsport universal hub v2. With sparco wheel.
Press once the Tuning Menu button. Show the setups for the wheel.When I press exit for the tuning menu nothing happens dont work on the Button module rally.Clubsport Universal V2 has no problems.
Tuning menu dont work in games no gear and speed on the display on the Button module rally.On the clubsport universal V2 no problems.
Tuning menu on the clubsport universal hub v2 no problems
How can I fix this problem on the poduim module rally.
Any one the same issues.
The Tuning Menu exit is fixed with yesterdays released driver 455 and included firmwares.
Yes it works.
Thanks .
I have the same issue the Seq and H shifter does not work. even with the new firmware. 455 very disapointing
Note when it is plugged into the computer the seq and h shifter shows and indicates it is working...
There is no fix yet implemented in driver 455 and also no ETA for a fix of this known issue, exclusive to PS5. Therefore on a PC it shows that everything is working.
It is under investigation to be fixed in the next months.
Hello everyone,
I was facing the same problem, no sequential shifting (cs dd+ and monte carlo wheel on ps5), so I decided to order the clubsport magnetic paddle module to install on the wheel till a solution for the clubsport shifter is available (I had it in mind as an upgrade anyway). Just installed it on my wheel and now not only the paddle shifting works, but also the sequential mode in the clubsport shifter!!!
Didn't expect that, but a nice surprise and maybe a hint for all of you facing problems 😄