I didn't know about the financial problems and I bought the ClubSport DD F1 Esports V2...I'm sad and if I knew I wouldn't have bought it, it costs a lot.
I only use it with the PC, I read about the many problems that there are. Which drivers do you recommend I install to have as few problems as possible?
hahahahahahahahahaha unbelievable to come back to this thread about once a month to see there's STILL no update or fix after like 9 months hahahahahahahahahahahahahahahahahahaha what a joke of a company
yeah, its a solution. but technically fanatec Clubsport DD/DD+ could be little better than others. its just this some stuff what makes that look not that great.
and some people seems not complain at all, and they hardware seems works just fine. so there just some products what Clubsport DD/DD+ may not like in its firmware
Ha, ha, ha. Looks like counting isn't one of your strengths. DD+ started getting shipped on Feb 7th, not even 6.5 months ago. This thread your posting in isn't even four months old. Guess when you buy second rate equipment, it makes time go by slow. Now you go deal with yours, while I enjoy my DD+ (which I may add works very well).
I have had a lot of trouble updating the wireless QR and wheels for about three generations of drivers now. The firmware update would stop at power down wheel and nothing happened.
After a lot of stuffing around and frustration I disconnected my button box from the computer and ran the updater again. Presto everything updated to the new firmware.
I got the f1 dd+ bundle. Using it on ps5 with gt7. Updated it to 455 from the website. problem i am having is with the f1 wheel. mclaren wheel and granturismo dd pro wheel work fine. i was reading to update to 457. i would like to keep the base on 455 . if i update the qr to 457 do i have to update the wheels to 457 to ? Thanks in advance
I have the same configuration, witn Ps5 playing mainly gt 7, 455 driver ( evrything perfect..) I have seen some have problem with this configuration after installing 457 if everything works well don t touch..anyway you can upgrade each item individually..
i have problem my fanatec CSL DD wheel.I recently bought a used clubsport steering wheel formula v2 for Xbox. I downloaded the latest drivers immediately 457 wheel base does not recognize the wheel. i.e. the green Xbox light does not light up even if I press the mode button several times. when you connect the original WRC wheel, then everything works fine. do you have any suggestions for me how to make it work. Best regards, Henrikki from Finland
it's an xbox supported wheel. the package says support for Xbox and PC. I got it to work by putting a WRC wheel and after that I removed the wheel and put a formula wheel right behind it and it worked. but when you turned it off and tried to see if it worked, it didn't. the only way to get it to work is to put another one in place and this one right after it
could be same issue what they had before with v2.5 but they not fixed it for v2, i quess currently one solution would be by use old firmware where that issue not happened
Henrikki this is a known issue where the wheel behaves differently before or after a swap depending on which wheel was detected when starting up. All the FW for CS DD & + (454 onward) will have this issue.
Only workaround is to start the base as you did w WRC and then swap as its not likely to be fixed soon - annoying but at least you have a way to make it work
unfortunately no new release candidate driver yet, but we are still working on it. It's mainly delayed because of the CS DD+ disconnection issues we are working on with highest priority.
The reason why I'm still closing this discussion to create a new one (link below) is to give more visibility to possible solutions and workarounds to people who suffer from the CS DD+ disconnection issues to hopefully already help them now until the next driver arrives.
Thanks to everyone who provided feedback, ideas and possible workarounds so far and thank you for your patience.
Note: While the reason to open the new discussion was to raise awareness of possible solutions for the CS DD+ disconnection issue, the discussion in general is still for everyone who is using driver 457 and wants to report and discuss feedback no matter what product he is using. This discussion will be closed, so this post stays the last one for best visibility.
Comments
Hi,
I didn't know about the financial problems and I bought the ClubSport DD F1 Esports V2...I'm sad and if I knew I wouldn't have bought it, it costs a lot.
I only use it with the PC, I read about the many problems that there are. Which drivers do you recommend I install to have as few problems as possible?
455/451 for base and 457 for Wheel?
Thanks
A page before, this very question was answered - even several times. Don't worry, enjoy your new toy!
Ok thanks, is it better to use 457 or 455 on PC?
hahahahahahahahahaha unbelievable to come back to this thread about once a month to see there's STILL no update or fix after like 9 months hahahahahahahahahahahahahahahahahahaha what a joke of a company
Here's a fix you can do ...Go sell all your FANATEC GEAR...With that money go buy some other brand...And there, it's fixed in days.
hahahahahahahahahahahahahahahahahahaha!!! hahahahahahahahahahahahahahahahahahaha!!
yeah, its a solution. but technically fanatec Clubsport DD/DD+ could be little better than others. its just this some stuff what makes that look not that great.
and some people seems not complain at all, and they hardware seems works just fine. so there just some products what Clubsport DD/DD+ may not like in its firmware
Ha, ha, ha. Looks like counting isn't one of your strengths. DD+ started getting shipped on Feb 7th, not even 6.5 months ago. This thread your posting in isn't even four months old. Guess when you buy second rate equipment, it makes time go by slow. Now you go deal with yours, while I enjoy my DD+ (which I may add works very well).
but don't forget there is also other product Called the Clubsport DD without the ++ what released little bit earlier than the ++ version
Ok thanks, is it better to use 457 or 455 on PC?
I am using 457 since april and have zero problems on PC.
I have had a lot of trouble updating the wireless QR and wheels for about three generations of drivers now. The firmware update would stop at power down wheel and nothing happened.
After a lot of stuffing around and frustration I disconnected my button box from the computer and ran the updater again. Presto everything updated to the new firmware.
I hope this helps anyone having the same problem.
For me the 457 is the best so far for the CSL DD on pc.
Zero problems and great fb.
What's the best firmware for DD+ together with the Universal Hub V2 for Xbox? So it works on Xbox Series X, Playstation 5 and PC.
is-int you the one who tell that your dd+ not turn on ?
there no firmware fix for this. either you need a refund or repair
I got the f1 dd+ bundle. Using it on ps5 with gt7. Updated it to 455 from the website. problem i am having is with the f1 wheel. mclaren wheel and granturismo dd pro wheel work fine. i was reading to update to 457. i would like to keep the base on 455 . if i update the qr to 457 do i have to update the wheels to 457 to ? Thanks in advance
Yes but there's another one coming.
I have the same configuration, witn Ps5 playing mainly gt 7, 455 driver ( evrything perfect..) I have seen some have problem with this configuration after installing 457 if everything works well don t touch..anyway you can upgrade each item individually..
I was adviced to take this here as it was a firmware issue:
"I updated yesterday Fanalab to 2.01.45 and according to the change log "Fixed high occurence of missed shifts when FanaLab is running."
This is unfortunately not true as I have frequently issues that it does not up or downshifts in Iracing. Afaik everything is updated, there is no
newer firmware etc."
PC driver 457
DD1 base ver 3.1.0.7
Wheel base motor ver 3.0.0.2
Stearing wheel Formula V2 47
QR 7
you say fanalab. does it happen also without fanalab ?
Hi!
i have problem my fanatec CSL DD wheel.I recently bought a used clubsport steering wheel formula v2 for Xbox. I downloaded the latest drivers immediately 457 wheel base does not recognize the wheel. i.e. the green Xbox light does not light up even if I press the mode button several times. when you connect the original WRC wheel, then everything works fine. do you have any suggestions for me how to make it work. Best regards, Henrikki from Finland
fanatec does have same steering wheel also without Xbox support, what exactly you buy ?
Hi,
it's an xbox supported wheel. the package says support for Xbox and PC. I got it to work by putting a WRC wheel and after that I removed the wheel and put a formula wheel right behind it and it worked. but when you turned it off and tried to see if it worked, it didn't. the only way to get it to work is to put another one in place and this one right after it
could be same issue what they had before with v2.5 but they not fixed it for v2, i quess currently one solution would be by use old firmware where that issue not happened
Do you know what firmware it would be where this still works
try 455. but of course that have own issues.
Henrikki this is a known issue where the wheel behaves differently before or after a swap depending on which wheel was detected when starting up. All the FW for CS DD & + (454 onward) will have this issue.
Only workaround is to start the base as you did w WRC and then swap as its not likely to be fixed soon - annoying but at least you have a way to make it work
Hello everyone,
unfortunately no new release candidate driver yet, but we are still working on it. It's mainly delayed because of the CS DD+ disconnection issues we are working on with highest priority.
The reason why I'm still closing this discussion to create a new one (link below) is to give more visibility to possible solutions and workarounds to people who suffer from the CS DD+ disconnection issues to hopefully already help them now until the next driver arrives.
Thanks to everyone who provided feedback, ideas and possible workarounds so far and thank you for your patience.
Note: While the reason to open the new discussion was to raise awareness of possible solutions for the CS DD+ disconnection issue, the discussion in general is still for everyone who is using driver 457 and wants to report and discuss feedback no matter what product he is using. This discussion will be closed, so this post stays the last one for best visibility.