But I saw in the 455 forum that if playing on XBOX, to avoid using 455 for CSL DD as the this update somewhat breaks XBOX mode. Has it been fixed now in the current 455 release?
455 Was never touched. The "current" 455 release is still the same release from December 2023 last year.
You cant fix something in an old driver without doing a newer one. So no, that's still broken in the Firmwares from the 455 driver from December 2023 last year and is only fixed with firmwares from newer 2024 drivers.
Thank you for the information. In this case could you advice me about which driver package version you recommend for CSL DD + McLaren GT3 V2 + Elite Pedals V2 combination for XBOX from the available driver packages to download?
If 457 is still goof for CSL DD + McLaren GT3 V2 + Elite Pedals V2, is there a way to download it?
I don't know if this is a bug in FW or my load cell is failing or combo of those, or bug in GT7 or what.
in GT7 I noticed brake pedal calibration lower limit deadzone was not right and CSL Elite V2 pedals kept showing an input without foot on brake even after hooking it up to PC and re-calibrating, and setting calibration to auto instead of manual.
There's also an invisible phantom brake input glitch every few seconds that resets the upper limit deadzone every few seconds. It never used to do that. But you can't see the input, but GT7 does and resets the upper limit deadzone as if you pushed the brake pedal, even when I set the lower deadzone past where I can see the input from calibration failing.
I don’t have any disconnection issues with my DD+ base on GT7. However, what I’ve noticed is that in the wheel setup, in AS mode, the BLI and BRF values never stay saved. Can anyone help me? ( v3 pedals)
I installed the shaft extension on my CS DD+ base and it went fine but the control panel and Fanalab no longer recognise the wheel base or wheel, only the pedals. I'm running 457 on the PC and had no issues with the driver, but now the control panel is trying to recover the missing wheel and requires 457 driver package to move ahead.
Can anyone supply the 457 driver to try and resolve this? I raised a support ticket too, but though this might be a good first option.
Hello Maurice,I am currently using the 457 driver. After upgrading my computer to WINDOW11, the driver occasionally fails to connect and needs to be reinstalled. Is this an incompatible behavior? I heard there will be 460 drivers later, integrated with FANALAB, right?🙂
Comments
Thank you!
But I saw in the 455 forum that if playing on XBOX, to avoid using 455 for CSL DD as the this update somewhat breaks XBOX mode. Has it been fixed now in the current 455 release?
I just preordered a PS5Pro. Is there anything known regarding compatibility with the current drivers/firmware ?
Thanks
Same as regular PS5...
455 Was never touched. The "current" 455 release is still the same release from December 2023 last year.
You cant fix something in an old driver without doing a newer one. So no, that's still broken in the Firmwares from the 455 driver from December 2023 last year and is only fixed with firmwares from newer 2024 drivers.
Hi Maurice,
Thank you for the information. In this case could you advice me about which driver package version you recommend for CSL DD + McLaren GT3 V2 + Elite Pedals V2 combination for XBOX from the available driver packages to download?
If 457 is still goof for CSL DD + McLaren GT3 V2 + Elite Pedals V2, is there a way to download it?
Thanks you for your help!
GT DD X, CSL Elite V2 pedals.
I don't know if this is a bug in FW or my load cell is failing or combo of those, or bug in GT7 or what.
in GT7 I noticed brake pedal calibration lower limit deadzone was not right and CSL Elite V2 pedals kept showing an input without foot on brake even after hooking it up to PC and re-calibrating, and setting calibration to auto instead of manual.
There's also an invisible phantom brake input glitch every few seconds that resets the upper limit deadzone every few seconds. It never used to do that. But you can't see the input, but GT7 does and resets the upper limit deadzone as if you pushed the brake pedal, even when I set the lower deadzone past where I can see the input from calibration failing.
So there's two separate issues. Video below.
GT DD X, CSL Elite V2 pedals.
Driver 457
Wheelbase FW 2.2.3.7
Steering wheel FW 1.0.7.0
QR FW 1.1.0.3
https://youtu.be/Ysfwnyj22HY
check your cable, they can todo same if its damaged
So，when will the next driver release?
DD pro don't have the force in Dirt Rally(PS4) with the PS compatibility mode.
Will you fix it in the future?
Or do nothing, just let it go?
I want a reply. If you won't fix it, please let me know and tell me the reason. Tech problems or the others.
I think my request is reasonable.
I don’t have any disconnection issues with my DD+ base on GT7. However, what I’ve noticed is that in the wheel setup, in AS mode, the BLI and BRF values never stay saved. Can anyone help me? ( v3 pedals)
Also, is it better if I go back to version 455?
That's normal. Just dont use the AS Mode.
I installed the shaft extension on my CS DD+ base and it went fine but the control panel and Fanalab no longer recognise the wheel base or wheel, only the pedals. I'm running 457 on the PC and had no issues with the driver, but now the control panel is trying to recover the missing wheel and requires 457 driver package to move ahead.
Can anyone supply the 457 driver to try and resolve this? I raised a support ticket too, but though this might be a good first option.
I have the CS DD+ and the CSP V3 with the last hotfixes and for a week no more problems with disconnects on GT7, THANK YOU VERY MUCH !
Hello Maurice,I am currently using the 457 driver. After upgrading my computer to WINDOW11, the driver occasionally fails to connect and needs to be reinstalled. Is this an incompatible behavior? I heard there will be 460 drivers later, integrated with FANALAB, right?🙂
After upgrading a PC with a different Windows Version you always have to reinstall the driver, yes.
You will need to install 455 until 46X gets released as 457 is pulled.
Thank you.But I'm worried that the 455 driver may not be compatible with the latest version of FANALAB
It is.
Do we have an ETA for driver 46X? Even a ballpark estimate…this month, next month?
VERY soon. 😉
/Keeps hitting F5 on the drivers page.....
PS: This is a solution to the download the missing 46x driver ;)
New driver 462 available
Please continue the discussion in the new thread, this one will be closed.