Hello Maurice, do you advise me to install the 462 on my GT DD PRO 8nm with CSL pédals and loadcell or will it not change anything compared to the 455?
Ignore Allen’s advice. He will have looking for a driver that isn’t available for download as it has been removed. 462 doesn’t contain anything extra over 457 for your base but is the one that is available. Therefore, if you’re going to do an update you should do 462.
462 quick feedback: I have just upgraded my base (DD+) FW from 454 to 462. I play GT7 on PS5.
With 454 I don't have any major problem. Just a tiny one that sometimes after I went out of the pit the wheel rotation became less than indicated in-game. I had to pause unpause to solve it.
With 462, this problem is not seen in the past hours, still needs further play to confirm I suppose. Other things like FFB or LEDs etc. are identical with 454, no problems.
i not advice him anything, i just tell him that 462 contains the 457 firmware, if you not been read anything then fanatec was focusing the Clubsport DD(++) disconnect issues, there are no changes about other hardware since 457
I know that but it may be easier install. Manual file was the issue I was having. If we wait and just install the normal one when added it should work if u get me.
Install Will be the same as the package will be the same without any difference at all when we decide to take the RC as official so the one you can download now would be the same as the one in maybe 2 weeks...😅 when it's not working now, then it wont work in 2 weeks. You need to repair your Windows.
this file 462 is not publically released on the Fanatec panel so we downloaded the file here hit manual box and added it that way.
it kept freezing when the hour glass was up
when it’s released to public properly can I just hit update and it will work. We updated my wqr and button endurance without any issues. Hopefully u understand me as I’m not great with computer stuff.
You dont need to Hit any manual Box. You need to uninstall your old driver, run the installer of the new driver, restart the pc, open the Control Panel, go to the Firmware Update Tab, open the Firmware Manager, click the green Update button, done.... No need to do anything manually with 462.
Because developing for a System where no Simracing games are supported so the products are not supported anyway in any Form is not really important when you have other big issues to fix. Also, no other Simracing manufacturer develops for Mac.
Comments
Hello Maurice, do you advise me to install the 462 on my GT DD PRO 8nm with CSL pédals and loadcell or will it not change anything compared to the 455?
its a 457 for you, it does change something
Here we go again, 2 pages of Allan BS show in a single day.
Ignore Allen’s advice. He will have looking for a driver that isn’t available for download as it has been removed. 462 doesn’t contain anything extra over 457 for your base but is the one that is available. Therefore, if you’re going to do an update you should do 462.
462 quick feedback: I have just upgraded my base (DD+) FW from 454 to 462. I play GT7 on PS5.
With 454 I don't have any major problem. Just a tiny one that sometimes after I went out of the pit the wheel rotation became less than indicated in-game. I had to pause unpause to solve it.
With 462, this problem is not seen in the past hours, still needs further play to confirm I suppose. Other things like FFB or LEDs etc. are identical with 454, no problems.
i not advice him anything, i just tell him that 462 contains the 457 firmware, if you not been read anything then fanatec was focusing the Clubsport DD(++) disconnect issues, there are no changes about other hardware since 457
His question was should he use 462. You said that he should use 457, “it’s a 457 for you”. As 457 doesn’t exist I’m saving him looking for it.
What Windows do you have? The driver only works on Win 10/11. Anything before (Win 7) wont work
Could at least start with giving us RSB + LSB as these buttons are already shipped and labeled RSB + LSB but function as RB + LB instead.
Hi @ all,
would you advise me to upgrade my DD+ on 455 to thge new 462 fw? Are there any updates/changes/fixes to the PBMR in that fw?
Thanks in advance and have a fresh start in the new week ;)
.
What does it say in the changelog?
i think you should try out, they been focus this clubsport dd issues, it may fix you something
Windows 11 but old laptop.
When you connect base error is popping out that some (.dll) file is missing
it could be that some visual studio .dll are missing, they usually not added by default to the windows and need download separately
what dll error message you get exactly?
you to may need add one of those if that what i think off
but more info would be better
Was thig.dll file missing or something. Im
gonna just wait till public release as we were able to update wheel update fine. Just that manual file wouldn’t work.
As Maurice has said - THERE WILL BE NO DIFFERENCE. It will probably be just a renamed file...
I know that but it may be easier install. Manual file was the issue I was having. If we wait and just install the normal one when added it should work if u get me.
It wont even be renamed if we decide to take the RC as official...😅
Install Will be the same as the package will be the same without any difference at all when we decide to take the RC as official so the one you can download now would be the same as the one in maybe 2 weeks...😅 when it's not working now, then it wont work in 2 weeks. You need to repair your Windows.
There COULD be some undocumented changes in FW.
The SW FW in 456 fixed the miss-click issue of funky switch in f1 2.5x wheel, which is no where to be found in 456‘s change log.
So it's worth trying, but no guarantee.
What do you even mean with manual file? There is nothing to do manually with this driver. It's all automatic.
Ok I’m not sure who’s getting confused.
this file 462 is not publically released on the Fanatec panel so we downloaded the file here hit manual box and added it that way.
it kept freezing when the hour glass was up
when it’s released to public properly can I just hit update and it will work. We updated my wqr and button endurance without any issues. Hopefully u understand me as I’m not great with computer stuff.
what manual box?
you need use that what included in zip file Fanatec_64_driver_462_rev1.msi
Iv no idea. Talk me through how u update this so in Layman’s terms.
https://fanatec.com/media/pdf/a6/ee/64/Driver-Firmware-Instructions-Manual-EN_Web_02_MO.pdf
Unfortunately I dont understand you at all.
You dont need to Hit any manual Box. You need to uninstall your old driver, run the installer of the new driver, restart the pc, open the Control Panel, go to the Firmware Update Tab, open the Firmware Manager, click the green Update button, done.... No need to do anything manually with 462.
Also why is Mac OS not supported?
What has this to do with 462 now?😅
Because developing for a System where no Simracing games are supported so the products are not supported anyway in any Form is not really important when you have other big issues to fix. Also, no other Simracing manufacturer develops for Mac.
Ok just curious as I have access to a Mac. His second laptop is old which is the one we were using.