all of a sudden my fanalab stopped seeing my games on stream, when I hover over the imgae of the game it says con not find on steam or you don't have the exe set.
if I double click on the image it opens the game.
Also in Game Profiles the ablility to enable or disable the telemetry for the game is greyed out and the display and lights on my CSL Elite and Formula V2 does not work with all games and the game profiles are nmot being used.
Profile is done and ready but made with a newer internal Beta Version, not compatible to 1.54.5.. Will release it when new FanaLab Version is released. Btw, New upload of my profiles has a HUGE Changelog... :)
Also made new profile for the 570S GT4 and changed the LEDs for the 911 RSR according to Season 3 changes and much much more. Stay tuned!
So it is working now I had to set the exe against the game icons, if I choose Steam then it doesn't see the game, not sure if this is a bug or my system or the way I have my settings on steam
never used fanalab, always just used 1 profile on my wheel per game, having wheel settings per car sounds amazing, how would i go about finding, downloading, and implementing all these profiles? seems like everyone raves about yours ahah
so I found the profiles, pretty good! my only issue was really bumpy places ( doing wk 13 911 cup at Chicago) I can't handle when the car is bouncing etc, anything you recommend for those specific tracks? I ended up turning linearity on for just there it was that bad, I am also using a formula PS4 on the dd1
Windows update KB5003254, KB5003637 and feature update 21H1 cause Fanalab to crash. Not sure which update, but uninstalled all 3 and was back to normal.
Something similar just happened to me. Only update I did prior to this was Logitech HDIClass 1.10.79.0. I have DD2, R300 Podium with APM.
What happened was the following, was working fine last night and I'm running 20H1 fully patched.
Opened Fanalab, doesn't detect the DD2 or Podium Hub. Power cycled wheelbase, PC. Fanalab still doesn't see them.
Open wheel properties. Select first wheel option in list. Throws an error that I should restart wheelbase and open wheel properties again, if that doesn't fix it contact support.
I do this and it opened this time, however when I press either of the bottom two buttons of the APM you don't see any buttons lite in wheel properties, The other paddles show dots when pressed. Open second entry for DD2 in list and same. paddles detected except bottom 2 of APM.
Click FFB button, seems to go a little wacky but after closing Wheel Properties Fanalab sees the wheelbase and Podium Hub.
Rebooted as a test and everything is still working.
Wheel was in 2.5 Comp mode when this happened if that matters.
There definitely something weird going on with Fanalab. Not exactly sure which step breaks it but I've started games in the past and immediately exited to change the wheelbase setting without issue.
Same config as two comments above.
Open RFactor2, go into settings to load my controls and the game isn't detecting all my devices. Quickly realize I'm in Comp v2.5 mode. Exit the game. Switch to PC mode, enter the game, load my controls. Everything is detected and works fine. Race Bridgehampton for a while before closing RFactor 2.
Open Fanalab to change Profile to WRC9 but I can't because the load button is grayed out, mind you I run WRC9 in PC mode so all I had to do was load the profile, no need to change the mode. Let's try DR 2.0, same thing, load button is gray. Switch to Main Tab in Fanalab, no Active Devices. WTF. Switch wheelbase to v2.5 mode, now I have two Active Devices (DD2 and Podium Hub), switch back to PC mode, no Active Devices. Reboot the PC, no Active Devices. DD2 and Podium Hub only show in v2.5 mode.
Open wheel properties, two devices listed in v2.5 mode. I open properties for one of them and everything is good.
Switch to PC mode, two devices listed in wheel properties. Open one of them and everything is good.
Switch back to Fanalab and the DD2 and Podium Hub are now listed in PC mode.
Switch to Game Profile tab and I can now load the WRC9 game profile.
Hi, I have been using 1.54.4 for a while now without problems. Now, it almost does not recognize any of my games anymore and says "Game not found". This happened after I added a new drive to the computer and moved my games to hit (add a new Steam library on the new drive and moved apps there using Steam's built-in feature). Games run fine from new location.
Is there an issue with Fanalab not finding games if they are not installed on the C drive? It also does not detect them when they are running as it seems.
Any help greatly appreciated - I miss the auto-loading of per-game default profiles so much. Thanks in advance!
Comments
Hi
all of a sudden my fanalab stopped seeing my games on stream, when I hover over the imgae of the game it says con not find on steam or you don't have the exe set.
if I double click on the image it opens the game.
Also in Game Profiles the ablility to enable or disable the telemetry for the game is greyed out and the display and lights on my CSL Elite and Formula V2 does not work with all games and the game profiles are nmot being used.
Any suggestions anyone
@Maurice Böschen Any chance of getting a profile for the new iRacing Porsche GT3 R for Fanalab?
I'm sure there are many using your profiles who would love for you to add one.
Cheers
Unfortunately not for this old FanaLab Version.
Profile is done and ready but made with a newer internal Beta Version, not compatible to 1.54.5.. Will release it when new FanaLab Version is released. Btw, New upload of my profiles has a HUGE Changelog... :)
Also made new profile for the 570S GT4 and changed the LEDs for the 911 RSR according to Season 3 changes and much much more. Stay tuned!
Sounds nice, looking forward to it *veryexited*
Hopefully the release doesn't depend on the shipment of the new DD base.....
To add to this I'm getting the following error in my log file
2021/6/10[18:44:47:433] [18540][18532] PCGameSteamSearch::PrivateLibraryFolderFromVdfFileGet | PCUtilDirectories.Exists() Failed!
2021/6/10[18:44:47:433] [18540][18532] PCGameSteamSearch::PrivateLibraryFolderFromVdfFileGet | PCUtilDirectories.Exists() Failed!
Can anyone shed any light and what and where its looking for this
Thanks
Champion Maurice, that's great news on all fronts, looking forward to your new profiles and changes
In iRacing season 3 patch notes there is mentioned: "ABS brake engagement is now logged to telemetry as the boolean, “BrakeABSactive”."
Could it then be posible to tune the brake pedal (v3) to vibrate when ABS is engaged?
Yes, this (as well as ABS Display and FlagLED features) should now be possible and is already being looked at :)
Cheers! Looking forward to it!
Any update for the iracing 911 GT3 R?
thank!
See some posts above yours. ;)
Done and ready but only coming once new Fanalab version is released.
Sounds awsome man! Are there new profiles coming for ACC as well?
I recommend your profiles to everyone, a real improvement from default!
So it is working now I had to set the exe against the game icons, if I choose Steam then it doesn't see the game, not sure if this is a bug or my system or the way I have my settings on steam
Any chance this release is coming in the next few weeks, or will it be later this summer when they'll be shipping the wheels, CSL DD, etc. ?
never used fanalab, always just used 1 profile on my wheel per game, having wheel settings per car sounds amazing, how would i go about finding, downloading, and implementing all these profiles? seems like everyone raves about yours ahah
so I found the profiles, pretty good! my only issue was really bumpy places ( doing wk 13 911 cup at Chicago) I can't handle when the car is bouncing etc, anything you recommend for those specific tracks? I ended up turning linearity on for just there it was that bad, I am also using a formula PS4 on the dd1
Does Fanalab work with Automobilista 2?, I'm unable to get the LED's on my Formula V2 Wheel to work, works fine on ACC
Yes. You just news to enable Shared Memory in game options as described in the hint when you click on Enable Telemetry in Fanalab.
Thanks, works now!
Windows update KB5003254, KB5003637 and feature update 21H1 cause Fanalab to crash. Not sure which update, but uninstalled all 3 and was back to normal.
That's not a general issue as I am also on 21H1 with latest KBs and it's working fine.
Why doesn't Fanalab save the last used profile, Everytime I boot up PC I have to Load the Profile? How Bizzar!! how Bizzar!
Something similar just happened to me. Only update I did prior to this was Logitech HDIClass 1.10.79.0. I have DD2, R300 Podium with APM.
What happened was the following, was working fine last night and I'm running 20H1 fully patched.
Opened Fanalab, doesn't detect the DD2 or Podium Hub. Power cycled wheelbase, PC. Fanalab still doesn't see them.
Open wheel properties. Select first wheel option in list. Throws an error that I should restart wheelbase and open wheel properties again, if that doesn't fix it contact support.
I do this and it opened this time, however when I press either of the bottom two buttons of the APM you don't see any buttons lite in wheel properties, The other paddles show dots when pressed. Open second entry for DD2 in list and same. paddles detected except bottom 2 of APM.
Click FFB button, seems to go a little wacky but after closing Wheel Properties Fanalab sees the wheelbase and Podium Hub.
Rebooted as a test and everything is still working.
Wheel was in 2.5 Comp mode when this happened if that matters.
There definitely something weird going on with Fanalab. Not exactly sure which step breaks it but I've started games in the past and immediately exited to change the wheelbase setting without issue.
Same config as two comments above.
Open RFactor2, go into settings to load my controls and the game isn't detecting all my devices. Quickly realize I'm in Comp v2.5 mode. Exit the game. Switch to PC mode, enter the game, load my controls. Everything is detected and works fine. Race Bridgehampton for a while before closing RFactor 2.
Open Fanalab to change Profile to WRC9 but I can't because the load button is grayed out, mind you I run WRC9 in PC mode so all I had to do was load the profile, no need to change the mode. Let's try DR 2.0, same thing, load button is gray. Switch to Main Tab in Fanalab, no Active Devices. WTF. Switch wheelbase to v2.5 mode, now I have two Active Devices (DD2 and Podium Hub), switch back to PC mode, no Active Devices. Reboot the PC, no Active Devices. DD2 and Podium Hub only show in v2.5 mode.
Open wheel properties, two devices listed in v2.5 mode. I open properties for one of them and everything is good.
Switch to PC mode, two devices listed in wheel properties. Open one of them and everything is good.
Switch back to Fanalab and the DD2 and Podium Hub are now listed in PC mode.
Switch to Game Profile tab and I can now load the WRC9 game profile.
Hi, I have been using 1.54.4 for a while now without problems. Now, it almost does not recognize any of my games anymore and says "Game not found". This happened after I added a new drive to the computer and moved my games to hit (add a new Steam library on the new drive and moved apps there using Steam's built-in feature). Games run fine from new location.
Is there an issue with Fanalab not finding games if they are not installed on the C drive? It also does not detect them when they are running as it seems.
Any help greatly appreciated - I miss the auto-loading of per-game default profiles so much. Thanks in advance!
i'd be happy with a single orange LED.. over a year and waiting................... 😛
pedal curves would be really handy also for brake release...
Orange requires Firmware change. As there are much bigger issues to fix first unfortunately orange will require a lot of more time.
Pedal curves are also not Fanalab but driver related.
Unfortunate however thanks Maurice for the info update..
Hi Maurice I love the wheel rim on your profile picture😀 is this a new wheel rim from Fanatec?