They work on every Fanatec Base. Just the Tuning Menu settings are, of course, completely incompatible with any other base, but LED and ITM stuff is working for every base.
In FanLab in the section Game Profile there is an option "Enable FanaLab's Game LED/Hardware Support" . Does it mean, that the settings from FanaLab are the ones that are used in the Wheel for the rev lights.
I am looking for an setup to the rev lights for the rpm to see the right point to change gear.
When I choice the option "Disable FanaLab's Game LED/Hardware Support", are than the rev lights controlled for the rpm through the game?
Sorry I'm new and in DD2 I'm looking now where are all the profiles or they are just only 5 profiles (setup 1 - setup5) ... because I have xbox x and now I will get also new PC ... how now to save all Game profiles from xbox x and PC ... I have looking inside Fanatec (icon on desktop)
and If I update the software and firmware not to losse all settings ... is possible to export them... and then import them back...
also where to find (please for all step by step ) how to enable LED lights on Formula Wheel V2 xbox/pc wheel...
sorry but I have spend so many hours in last week try to catch all Fanatech setups...
also how to use this FanaLab version 1.60.1 file (please step by step.... )
yes seriously, because the game changed a few things which created new issues when using the 2021 telemetry, we first need to workaround those new issues before re-enabling it, but its planned.
Fixed: Physical APM switch on Formula V2 and McLaren GT3 not working correctly in UI.
Updated: Moved FanaLab shortcut to "F" section in start menu.
Added: Changing ITM pages of Button Module Endurance within FanaLab
Added: Automatic ITM page change for Button Module Endurance
Later today people which still have 1.60.1 installed should get a notification when starting FanaLab which offers the download of the newer 1.60.2 version. The online file which FanaLab uses to check if a newer version is available did not get changed yet which is why no notification was going out so far.
I'm seeing the same issues as Alexander. On 1.60.2, I can't see the tuning menu options for the DD1, and also can't select FFB in the game profiles.
Not sure how to tell you what drivers I'm using for the base and wheel, but the properties page says PC Driver 402. I'm using the PS4 DD1 variant w/ the Clubsport V2 wheel and V3 pedals.
After downloading the new version, I uploaded one of Maurcie's profiles for F1 2021, and in the profile it said DD2 as the base. In trying to figure out how to change that, I noticed the issues w/ the tuning menu.
Which driver and which firmware do you have installed?
New FanaLab version is only compatible with newest drivers and firmwares (in this case as of now driver 429 with Firmware 689).
Try that. If you already use driver 429 then try the driver repair with the Base powered on or change USB ports.
No Tuning Menu means either outdated incompatible driver is being used or the driver did not detected the base properly and therefore FanaLab doesnt see the correct base and cant enable Tuning Menu...
Comments
It works, thanks
It works,no problems! thx
This is the link when it was still working: https://admin.forum.fanatec.com/uploads/342/VL94JABKMUJU.zip
From Google Web cache: https://webcache.googleusercontent.com/search?q=cache:https://forum.fanatec.com/discussion/24186/fanalab-1-60-1-download-post-your-feedback-here#latest
Is this the official download link for the latest Fanalab software? I am only seeing text; the download file seems to be missing from this post.
Look one post above what @Alexander Mielchen wrote:
This is the link when it was still working: https://admin.forum.fanatec.com/uploads/342/VL94JABKMUJU.zip
From Google Web cache: https://webcache.googleusercontent.com/search?q=cache:https://forum.fanatec.com/discussion/24186/fanalab-1-60-1-download-post-your-feedback-here#latest
Yes, works perfectly, thank you for sharing it as the link in the initial post is still down.
Seriously? Still 2020 telemetry for f1 2021? When will a fix finally be available? kind of unuseable! Do you have an ETA for us?
Is it possible to use the profiles on the CSL DD, or do the profiles work only with the Fanatec DD?
They work on every Fanatec Base. Just the Tuning Menu settings are, of course, completely incompatible with any other base, but LED and ITM stuff is working for every base.
Thanks, perhaps you can explain me another thing.
In FanLab in the section Game Profile there is an option "Enable FanaLab's Game LED/Hardware Support" . Does it mean, that the settings from FanaLab are the ones that are used in the Wheel for the rev lights.
I am looking for an setup to the rev lights for the rpm to see the right point to change gear.
When I choice the option "Disable FanaLab's Game LED/Hardware Support", are than the rev lights controlled for the rpm through the game?
Enable enables Fanalab support, Disable disables Fanalab support so they are controlled by the game if supported and activated in the game options.
Sorry I'm new and in DD2 I'm looking now where are all the profiles or they are just only 5 profiles (setup 1 - setup5) ... because I have xbox x and now I will get also new PC ... how now to save all Game profiles from xbox x and PC ... I have looking inside Fanatec (icon on desktop)
and If I update the software and firmware not to losse all settings ... is possible to export them... and then import them back...
also where to find (please for all step by step ) how to enable LED lights on Formula Wheel V2 xbox/pc wheel...
sorry but I have spend so many hours in last week try to catch all Fanatech setups...
also how to use this FanaLab version 1.60.1 file (please step by step.... )
DD2 + V3 inverted + mclaren wheel / F1 wheel / WRC Wheel / ...
best regards to all
The currently loaded profile isn't being displayed. Field remains blank
Which version? Working fine for me.
hey! have the same problem with 1.60 that the loaded profile is not shown above under active profiles with the acc profiles!
No
the active Profile remains empty
I have it
Also the same with 1.60.2
For me and other internal testers it seems to work fine, do you know how old the profiles are or with which versions they were saved?
Does it get fixed by saving the setups again?
I see you have a CluSport V2.5, with which driver and firmware are you using it? We'll have a closer look with the same then.
Not yet but the feature is planned for the future. We would have added it already but it was more difficult to do than anticipated.
How old are your profiles? Which version did you used before?
Does re-saving the profile help?
Still showing the active profile just fine for me...
does it help to re-save the profiles again? Are they from an earlier version of fanalab?
yes seriously, because the game changed a few things which created new issues when using the 2021 telemetry, we first need to workaround those new issues before re-enabling it, but its planned.
Csl DD i have an the new vision
the Profils are fanlab 1.57.2
Hotfix 1.60.2
Later today people which still have 1.60.1 installed should get a notification when starting FanaLab which offers the download of the newer 1.60.2 version. The online file which FanaLab uses to check if a newer version is available did not get changed yet which is why no notification was going out so far.
Tried with older and newer profiles (yours) and nothing works. Re-saved or not. 1.60.1
Edit: Tried with 1.60.2 and same issue.
I'm seeing the same issues as Alexander. On 1.60.2, I can't see the tuning menu options for the DD1, and also can't select FFB in the game profiles.
Not sure how to tell you what drivers I'm using for the base and wheel, but the properties page says PC Driver 402. I'm using the PS4 DD1 variant w/ the Clubsport V2 wheel and V3 pedals.
After downloading the new version, I uploaded one of Maurcie's profiles for F1 2021, and in the profile it said DD2 as the base. In trying to figure out how to change that, I noticed the issues w/ the tuning menu.
In your case the missing Tuning Menu is because of the old driver and old FW. Update to driver 429 with Firmware 689.
New FanaLab version is only compatible with new driver.
Which driver and which firmware do you have installed?
New FanaLab version is only compatible with newest drivers and firmwares (in this case as of now driver 429 with Firmware 689).
Try that. If you already use driver 429 then try the driver repair with the Base powered on or change USB ports.
No Tuning Menu means either outdated incompatible driver is being used or the driver did not detected the base properly and therefore FanaLab doesnt see the correct base and cant enable Tuning Menu...