Blog

Discussion List

  • Tech Tip: PW all versions: Shaking in GT5

    • Some customers complain that the wheel is shaking on a straight road.


      Solution:

      • Make sure you  have sensivity set to OFF = 900°
      • Reduce the FF to 66 or 33.


       


      The GT5 Demo is much better adapted to our wheel than GT5:P and therefore the shaking is almost non-existant if you follow these rules.


       

    -1 comment 278 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PW driver 103 pre-release

    • We have a new driver version available. This version is not fully tested yet.


       Changes:

      • Windows 7 tested
      • No more center calibration function for wheels which are supporting the calibration by hot key.This avoids a conflict between both calibration methods.
      • Reduced demand for system ressources. This increases the games framerate in several games like GT legends significantly.

        (you can test this with www.fraps.com )
    -1 comment 219 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS 900° detection in FM3

    • We discovered a strange phenomenom with the wheel rotation.


      FM3 works fine and detects the wheel as a 900° wheel if you have selected 900 in the SEN setting of the Tuning menu and if you start the Xbox console with the on/offf button on the console.


      But in case you start the console by pressing the Xbox Guide Button on the wheel, the wheel detection of FM3 does not work properly and the wheel is recognized as 270° wheel. As the setting in the wheel is still 900 it will result in a very unsensitive wheel so you have to move the wheel a lot.


      There are two ways to let FM3 go to the correct mode:


      1. Turn the wheel off and on again


      2. Change the SEN setting to 540 and back to 900


      Please make sure you have the correct 900° mode activated because FM3 will work much better with it. Try it!


      PS: In order to confuse you even more: If you start the game and in the Tuning menu you have selected anything other than 900, the game will detect the wheel as a 270° wheel. So if you select 540 the game will be even less sensitive than if you select the proper 900° mode. Got it?


       

    -1 comment 255 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • How to install the shifters on any cockpit

    • There is a great mod made by  ron7 about how to attach the Porsche wheel shifters to cockpits like the Playseat etc.


      It looks solid and made with standard components and without the need of special DIY skills.


      Check it out!


      http://insidesimracing.tv/forums/viewtopic.php?f=110&t=1331&start=10


       


      Edit: If you like to have it more simple you can buy the RennSport Wheel Stand Shifter adapter and just bolt it to anything.

    -1 comment 297 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS review by Autosimsport
    -1 comment 230 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • SRT Wheel shootout - Fanatec beats them all

    • Here is part 2 of the shootout between

      • 911 Turbo S Pure
      • 911 GT3 RS
      • G27
      • Driving Force Gt
      • F430


      Another great victory for our wheels!


      My concern is that nobody understood that this is a comparison about the wheels itself without considering the pedals.


      Please let me know if this was clear to you after watching it and if you would be interested about the opinion of SRT what complete package (incl pedals) would be the best at the moment.

    -1 comment 278 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS Clubsport edition sold out

    • The first of the 3 product version of the PWTS is sold out.


      The regular 911 Turbo S (PWTS) and the 911 Turbo S Pure (PWTS P) is still available and of course the Clubsport pedals as well.


       

    -1 comment 224 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS / RSWS review by Virtualr.net
    -1 comment 322 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PW new driver 102 Beta available

    • Here is a new driver version which has the following changes:


       

      • Flatout 2 crash issue fixed
      • Shaking curb issue fixed (shaking does not stop after driving over curbs)
      • Added new setting 6 for DriftMode




      This version is still Beta but should run stable. Please let me know if the above mentionded issues are fixed.


       


      This version works with all Porsche wheels.


       

    -1 comment 261 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS on Engagdet Show
    • Here is an interesting video about a competition in Silverstone.

      PWTS with FM3 

      vs

      Johnny Herbert in a real 911 GT2

      The vid was made very well although they need some assistance how to set up the monitors ;)

      No idea if the result was fake or not but the track was obviously wet in real which is certainly a disadvantage which can cause 3 seconds.

    -1 comment 226 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • RSWS production and shipping information - UPDATE

    • The RennSport Wheel Stand is expected to arrive today in our warehouse in the USA and it will be processed immediatly after arrival.


       


      UPDATE


      The goods arrive today and will be shipped today and tomorrow. You will get a tracking number once it is shipped.

    -1 comment 200 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Mod: PWTS converted to PWGT3RS

    • Mike made a great mod and took his 911 Turbo S and his 911 GT3 RS and exchanged the electronics so he can enjoy Alcantara leather on the Xbox 360.


      This is the only wheel in the world like this but I guess I will try to mod one as well.


      Just to be very clear: If you open the wheel and damage something, you risk to lose the warranty. (Sorry but we cannot take full responsibility for your mechanical skills. It is hard enough to control our own production)


      Watch the videos for a detailed tutorial how he modded the wheels. It is also a good video to see how you open the wheels in general.




       


       


       

    -1 comment 550 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS review: Neoseeker.com

    • http://www.neoseeker.com/Articles/Hardware/Reviews/911_turbo_s/ 



      "We have
      to thank the folks at Fanatec for giving us a run with their latest dose of
      madness -- the 911 Turbo S defines what a solid racing wheel should be with
      sleek looks and even the choice of interchanging parts with Logitech wheels.
      The price may be steep for some racers with a tag of $499 for the Clubsport
      Edition on the Fanatec Shop, but the wheel delivers on every cent invested with
      great craftsmanship in the construction and rigid handling. Add onto this the
      ability to play on the Playstation 3, PC and Xbox 360 and it starts to show why
      it’s such a value, particularly with extremely limited inventory on the 360
      platform."


       


      Editor's Choice Award


       

    -1 comment 249 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • New Fanatec website with community section

    • We are currently working on a complete new website of Fanatec.com which will also integrates the 911wheel.com community section and comes with a new webshop as well.


      We can still do some changes so it would be great if you let me know what changes you like to see in these areas

      • Product description
      • Forum
      • Blog
      • Other community features
      • Support section
      • webshop


      Please leve your comments hear if you like to see some changes or improvements. Thank you.


       


       

    -1 comment 235 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS missing pedal adapters - UPDATE

    • We did not ship the first PWTS Pure versions with the pedal adapter and without the pedal cable so several customers could not use the PWTS Pure with the G25 pedals or MS Monaco pedals.


      Following Murphy's law, we shipped a pedal adapter to those customers which only works with the G25.


      If you have received a PWTS Pure and need an adaptor for the G25 we can supply one immediatly. Just contact our customer service please.


      In case you want to connect the MS wheel I am happy to tell you that we solved the problem and currently producing new adapters. They will be sent to us by express and we will ship it to all customers which requested the adaptor for their Pure version. Shipment will take about 1-2 weeks until you get it.


      UPDATE


      We will send new adapters today by UPS from China to our distribution centers in the US and Germany. We should be able to send them to customers by the end of week 46.

    -1 comment 246 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS review by ConsoleGaming.EU

    • Here is a detailed review about the PWTS and RSWS:


      http://www.consolegaming.eu/newspost.php?id=295


      Overall rating 9,8 / 10



      "In
      conclusion, the Fanatec Porsche 911 Turbo S wheel, accompanied with the
      RennSport Wheel Stand, is by far the best racing equipment that any console
      gamer can have, in a house that won't be able to fit a fully sized cockpit!"


       

    -1 comment 184 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Forum for support issues

    • As we are getting more and more requests for help on technical issues it made sense to open a special thread for discussion of technical issues.


      Please go to our forum section and post your problems under "technical issues"

    -1 comment 224 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS Manual & Quick guide UPDATE

    • Apparantly the first units of the PWTS come without a quick guide so it will be hard for you to figure out how to set it up.


      http://www.fanatec.de/download/pwts_support/pw_ts_quickguide.zip 


       


      Sorry for this but to print the manual would have delayed the shipment.


       


      The full manual will follow next week. In the meantime you can check the PWGT3RS manual how the TUNING works.


      http://www.fanatec.de/html/index.php?id=3116&lang=en  


       


      UPDATE


      In the attached document who can see how to connect the RF dongle to the wheel in order to make it work. You can also see how to calibrate the shifters or the wheel center.

    -1 comment 460 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS tests of the pre-production units
    -1 comment 338 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS UPS advanced shipment offer

    • Due to several requests from customers we would like to make the offer for all customers to ship the wheel directly from the chinese factory by UPS or Fedex express to your door. This should take only 4 days instead of 4-6 weeks.


       

      • This option is available to all customers in EU and USA
      • It costs150 USD per wheel independent what wheel has been ordered
      • Payment ONLY possible with Paypal
      • You need to send a special email to info[at]911wheel.com (replace [at] with @) with the following content:



        Header: PWTS advanced shipment

        Text:

        Please send my Porsche 911 Turbo S wheel by advanced shipment.

        Order nr

        Name

        Email
      • This is a limited offer from today until Oct 12th
      • We do not guarantee any arrival dates. We just make sure that you get the wheels earlier than with normal shipment by boat
      • The wheels with advanced shipment will by produced right after the wheels we dedicated for airfreight and go to early customers.
      We will send you the payment info afterwards and a tracking nr. as soon as it has been shipped.
    -1 comment 238 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Great help from iRacing community solves an issue

    • Some users noticed that the PWGT3RS wheel disconnects after some playtime and you even hear the system sound which indicates that you plug off a USB device.


      Mark Jeangerard and Thomas Detige found out that the root cause for this issue are wrong power management settings for USB devices.


      "Also, many system come preset to conserve USB power by temporarily
      cutting or disabling power to USB ports that are not actively in use.
      This can often be problematic for USB drivers that run in the
      background, since background tasks are not given power priority by the
      OS. If you use USB interfaces or controllers, than you should disable
      this power management scheme. Go to the Device Manager > Universal
      Serial Bus Controllers > right-click on a "USB Root Hub" >
      Properties > Power Management > deselect "Allow the computer to
      turn off this device to save power" > press "OK." Repeat this
      process for all USB Root Hubs in the Device Manager."


       


      "For Win7 users, go to control panel > system and security > power
      options. Click "change plan settings" next to the selected plan, which
      is balanced by default. On the next screen, click "change advanced
      power settings", look for "USB settings" in the list and put "Setting"
      under "USB selective suspend setting" to "Disabled". This should
      automatically deselect "Allow the computer to turn off this device to
      save power" on all USB root hubs power management tab, but you can
      check it manually in the device manager to be sure. The USB power
      saving feature should now still be disabled after rebooting."


       


      Thanks a lot for the help!


       

    -1 comment 622 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS: New features

    • We used the delay to implement a few new features which I am sure you will like a lot.


      1. USB connection cable


      On PC/ PS3 you now have the option to choose between a wired or a wireless connection. This feature is standard on all versions of the wheel.


      (If you now consider to cancel the order of your wireless dongle you are free to do so but please note that you need to cancel the complete order and reorder again due to technichal reasons.)


      2.  DriftMode


      We now have the driftmode implemented into firmware so you can use it also on the consoles without the driver


      3. ABS vibration


      In the firmware you can choose a percentage of brake force on which the vibration motors of the wheel and the CSP will be activated. This helps you to find the optimal brake force easily. Compatible to all games on all platforms!


      I hope you like the features.


       

    -1 comment 380 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • On the way to solve the bug with the non stopping curb vibration

    • We finally get our hands on a PC which shows this problem so we can reproduce it. This means we can now look for the root cause and solve it with an upcoming driver release.


      This can still take several weeks but it will be solved. In the meantime we recommend to set the curb vibration to "0" in simbin sims. In rFactor there is no possibility to tweak the curb effects so it cannot be turned off.


      Other sims dont show this problem.


      Thanks to Michael for the PC!

    -1 comment 194 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS production - UPDATE 25

    • We are now waiting for final approval from MS and already prepare production. As we will ship the first units by air shipment we are confident to deliver all open orders which have been ordered until June 2009  at the end of September. The rest of the open orders will be shipped in October and if you place an order now you can expect to get your product in November.


      The schedule is still not 100% confirmed as there are many uncertainties. I will keep you up to date once we get the final approval and start manufacturing.


       


      UPDATE 15


      All airfreight shipments (pre-june) have been shipped on last Wednesday (28.10.) and should arrive very soon at your house.


       


      UPDATE 16


      Post-June orders:


      EU:


      Ship Edith Marsk ETA 25.11.2009


      USA:


      Ship Mathilde Maersk ETA 13.11.2009


      ETA: Is arrival date of the ship in the harbour. Then it needs to be unloaded and the goods go to customs clearance etc. It can still take 2 weeks from ETA until the wheel arrives at your door.


      There are more containers on the way but these are the first to arrive. By middle of December we should have all inventory for the open orders in our warehouse.


      We are currently lacking some raw materials but we plan to finish the production of the 10.000 units within the next 8 weeks.


      UPDATE 17



      Here is a little bit more detail what is on the way.


      EU


      The first containers will arrive on 25th of Nov. and we
      will ship all open PWTS orders a week later to our customers.


      The Pure and Clubsport editions ordered until September
      will also be delivered with this shipment. Please don't ask for a precise cut-off date because we cannot tell you.


      All other open ordes will be delivered in the second
      shipment which arrives on the 2nd of December.


       


      USA


      The first shipment will arrive on the 13th of Nov. and will ship one week later to customers.


      The first shipment will contain all PWTS (all versions) ordered until late September. 


      The rest will arrive in the second shipment which will land on the 20th of Nov and will be shipped out to customers one week later. 


      Shipment from our warehouse in CA to your door depends on where you live.


       


      It will even be enough to have some stock but I am sure it will not last very long.


       


      The only part which is delayed are the standard pedals which are bought separatly. I will update you later on those.


       


      UPDATE 18


      The fist container  arrived in the USA but the shipment got stuck in customs. They thought that the prducts might be pirated so now we have to proof that we have the authorisation to use the Xbox and Porsche logos.


      The container in the EU will arrive in time next Wednesday.


      UPDATE 19


      The standard pedals for PWTS which have been ordered separatly have not been shipped with the sea shipments unfortunatly. We will send them out from China by the end of next week by airfreight so you should have them with some delay. 


      The Pure versions do come with pedal adapters now so please use G25 or MS pedals in the meantime if possible.


      UPDATE 20


      We received the authorisation letter from MS today and hope that customs will release the US shipment very soon.


      UPDATE 21


      With the second shipments we can still fullfil all open orders. 


      EU


      First containers have arrived. We expect to get the goods by end of next week in our warehouse.


      The second ship (Estelle Marsk) will arrive on Dec 2nd.


      http://www.marinetraffic.com/ais/datasheet.aspx?SHIPNAME=estelle+maersk&TYPE_SUMMARY=&PORT_ID=&menuid=&datasource=SHIPS_CURRENT&app=&B1=Search


      USA


      The first containers should be shipped to customers early week 49.


      The second shipment (Maersk Antares) has arrived as well and we wait for customs clearance.


       


      UPDATE 22


      The second shipments have arrived in EU and USA and by the end of this week (week 50) we will send out all open orders. 


      Only a few PWTS Pure customers did receive a defective adapter or we did not ship the adapter cable. If you are affected please contact our e-support and we will send you a new adapter. (Please make sure you conenct it to the right plug and only connect it when the wheel is power off) 


      The delivery of PWTS in USA was just enough to fullfill the orders so the next delivery will be in January.


      In EU we have PWTS in stock.


      We also have PWTS Pure and the Clubsport pedals in stock now for immediate shipment in EU and USA.


      The PWTS Clubsport Edition is about to be sold out within a few days as we are reaching the maximum number of its limited edition and we will stop offering this model very soon.


      Thank you very much!


       


      UPDATE 23


      The standard pedals which have been ordered separatly are on the way by airfreight to USA and EU and will be shipped out in week 51.


       


      UPDATE 24


      Several PWTS Clubsport editions have been shipped without the RF dongle and the shifter set. 


      We are aware of that and we will ship all missing items. We just decided that instead of waiting until those parts arrive, we better send out the wheels and pedals first. The RF dongles will be shipped next week but I am still waiting for info on the shifters.


       


      UPDATE 25


      As all pre-orders have been shipped, i decided to change the publishing options of this post so it does not stick on the front page anymore.


       


       


       


       

    -1 comment 417 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Kane tests a new weapon

    • Kane, the most evil guy on the universe tries out the PWGT3RS mounted on the new RennSport e-motion cockpit if he can use it to kill innocent spectators on racing tracks.


      As he was not able to kill somebody he was obviously dissapppointed so there will never be a NOD racing wheel made by Fanatec.

    -1 comment 176 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Fanatec at the GamesCom
    • Fanatec does not have a separate booth but we actually are very present at the GamesCom in Cologne which starts today until the 23th of august.

       

      You can test 3 Porsche 911 Turbo S wheels Clubsport edition with Forza MotorSport 3 at the Microsoft booth. All are mounted on RennSport Cockpits with Triple monitors. (Hall 6, Booth A011)

      Or you  test the 911 GT3 RS Clubsport edition at the booth of the publisher Airmotion (Hall6.1 booth 56). It is also mounted on a RSC with triple monitors.

      And finally we show the new Rennsport E-Motion Cockpit at the community lounge of EA with Need for Speed: Shift. The lounge is resticted to community members and by invitation only but if you meet me at the show i can probably manage to get you in.

       

      Pictures and videos to follow...

    -1 comment 345 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWGT3RS CS on the way to customers

    • Today we start shipping the Porsche 911 GT3 RS Clubsport edition from our US warehouse.


      EU customers have to be a bit more patient as we are still waiting for the Clubsport pedals to get through customs. We will ship all open EU orders next week.


       

    -1 comment 166 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Guide to invert your CSP

    • One of your community members has made a great guide how to invert your CSPs.


      Please check out the guide of Wheel Nut at GTforums:


      http://www.gtforums.co.uk/gtforumsc1/showthread.php?tid=224


       


      Please note that you can do this mod without losing the warranty if you do not cause any damage during this conversion. The mechanical skills needed to do it are quite low.


       

    -1 comment 273 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWT now reduced to 249,95 USD!

    • Due to the upcoming internal competition of the 911 Turbo S wheel we decided to reduce the price of the original 911 Turbo wheel to 249,95 USD.


       


      This wheel is only available in the US for now but we will import the wheel to Europe later this year as it will be a good solution for PlayStation owners who do not care about the Xbox360 and prefer the wireless connectivity and the increased compatibility of the PWT on the PlayStation 3.


      Get one of the last units with the USB memory key!


      http://www.fanatec.de/webshop/new_usa/product_info.php?cPath=21&products_id=35&osCsid=90d18b55759c660418e06f0651fd2dd5 


       

    -1 comment 231 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Sebastian Buemi and Natacha Gachang at the "Face of Forza" event
    • There was a cool event at the Nürburgring this Wednesday to introduce the "Face of Forza" in Europe Natacha Gachnang.

      She is a very successful F2 driver and she obviously had fun to take the journalists on a lap around the GP track with an Audi R8 V10. 

      She told me that only one journalist asked her to slow down :)

      Her cousin Sebastian, the Toro Rosso F1 driver, was there as well and we had some little competition between us on the FM3 tracks. The final race was interrupted as he had to leave to the airport so he owes me a revanche.

      Both of them asked me for a wheel and I am happy to send them one so they can practice FM3.

      I also had the chance to drive one of 5 Audi S4 on the GP track with 3 other guys of Microsoft and behind the car of the instructor Alfred Heger, a well known DTM and endurance race driver.

      Alfred and me had to wait only 2 times per lap so that the MS guys can catch up again B-) behind us.

      Please see some pictures here:

      http://picasaweb.google.de/Thomas.Jackermeier/FaceOfForza#

      TSR.CH (French)

      http://www.tsr.ch/tsr/index.html?siteSect=500000&bcid=689073#bcid=689073;vid=11020424

    -1 comment 278 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Arrival dates of new GT3RS and CSP shipment

    • I just received the arrival dates of the ships bringing the new GT3RS and CSP shipment to US and EU.


      EU:


      PWGT3RS: August 4th


      CSP: August 11th


      US:


      PWGT3RS: July24th


      CSP: July 30th


       


      Please note that it can take 1 to 3 weeks until everything goes through customs and arrives at the customer destination.


       


       


       

    -1 comment 238 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Help needed to solve a bug

    • Several users reported a bug in our driver since very early versions.


      It only occurs on a few games and not on all PCs. But we were never able to reproduce this bug so we cannot solve it. It just does not happen on our test PCs.


      So we need your help to solve this driver bug in case it occurs on your PC.


       


      Symptom: After hitting a curb and going back on the road, the shaking of the curbs does not stop until you hit another curb again


       


      Please answer the following questions:


       


      1. Please list the games on which the problem occurs.

      Name of game


      Version number of game


      What mod or custom track is installed?


      What track?


       


      2. Do you have any plug-ins installed e.g. RealFeel or similar?


      3. Please list all games which you played and did not show this problem


      4. Please list some system info


      Run the program dxdiag.exe and save the system info to a txt file. Then copy the info of your system. Only this info is relevant:


      System Information

      ------------------

      Time of this report: 7/16/2009, 12:19:38

      Machine name: HOME_GAME2

      Operating System: Windows Vista™ Ultimate (6.0, Build 6002) Service Pack 2 (6002.lh_sp2rtm.090410-1830)

      Language: German (Regional Setting: German)

      System Manufacturer: System manufacturer

      System Model: System Product Name

      BIOS: Phoenix - AwardBIOS v6.00PG

      Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 CPUs), ~2.2GHz

      Memory: 2046MB RAM

      Page File: 2042MB used, 2289MB available

      Windows Dir: C:Windows

      DirectX Version: DirectX 10

      DX Setup Parameters: Not found

      DxDiag Version: 6.00.6001.18000 32bit Unicode


      5. Test system performance. Please run the fraps tool (www.fraps.com) and tell us the framerate you have in the game in the lap when the bug occurs. 


       


      Thanks a lot to everybody posting this info here in the blog.


       


      Please do not post anything else in this thread as our developers ned to have a look and check this information.


       


       


       


       


       


       

    -1 comment 258 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Driver 099 available

    • There were some bugs in the FF protocol in ver 097 which caused the FF to stop.


      We also  solved the issue with hanging sliders of the pedals in the tes tab.


       


       

    -1 comment 219 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • New Driver version 097 available

    • This driver has undergone a complete rework of the installation routine and we made several bugfixes regarding the following issues:

      • installation problems
      • problems to detect the correct wheel
      • rFactor plug in issues 
      Note: install the new rfactor .dll before you install the driver.



      Please let me know if you still have issues. Thanks.
    -1 comment 222 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • CSP Firmware update - UPDATE2

    • Attached you find an update program to update your CSP with new firmware.


       


      The new firmware has these improvements:

      • Select the amount of brake dead zone (down to 0)
      • Broader range of adjustment possibility on the brake with the potentiometer


       


      UPDATE: The 64 bit version is not working and we are trying to fix this issue.


      UPDATE 2: If the vibration on the brake pedal does not work, please  install CSP_FW_Update_2_Win32


       


       

    -1 comment 621 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Forza Motorsport 3 shown with Fanatec wheel at E3

    • I am very pleased to announce that the team of Turn 10 has chosen our Porsche 911 Turbo S Clubsport wheel to show the new racing game at E3.


      The wheel is mounted to a motion simulator with 3 big screens which makes it a nice  setup to play his fantastic game.


      I had the please to test drive the new tracks and was blown away by the graphics and physics. This game loks totally different from Forza 2 and not just like an update. The rewind function is not new but very welcome and of course I love to finally play in cokpit mode. 


      I will be at the Microsoft booth and if anybody wants to come bye he is very welcome. I will post some pictures later today.


      Here is the official ress release from Fanatec and Microsoft:


      http://forzamotorsport.net/en-us/news/The-Ultimate-Racing-Wheel-for-Xbox-360.htm


       


       


       

    -1 comment 288 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • CSP video manual now available

    • This video shows you how to adjust and tune your Clubsport pedals.


      It also shows how to change the lubricant on the first batch to make it move more smoothly.

    -1 comment 193 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Certified 64 bit driver now available + new 32bit driver !UPDATE 3!

    • UPDATE 3: ver 64_091 and 32_091 now available


      We finally have a certified driver for Vista 64 for all Porsche wheels and the CSP.


      Please have a look at the attached beta version and let me know if everything works fine.


      We also changed the installation routine of the 32 bit driver completely.


      There are still some minor things to fix like wrong logos etc but the driver should run stable already.


       


      IMPORTANT: Please de-install all previous drivers manually before installation and make sure that the PWservice.exe or PWsrvc.exe is not running before installation.  If possible search for those files and delete them because somtime the de-installation routine does not delete those programs.


       

    -1 comment 377 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWGT3RS and CSP finally on the way to customers

    • After going through customs for about ten days in the US we are happy to announce that the 911 GT3 RS wheels and Clubsport pedals are on the way to customers.


      Tomorrow the first wheels will arrive depending on where the customer is located.


      We ship from California and Germany.


      The final driver is unfortantly still not ready yet but in the meantime you can use the driver of the Porsche 911 Turbo wheel or the Beta version from this blog.


       


       

    -1 comment 165 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Wheel Stand back in stock

    • We just received the new shipment of RennSport Wheel Stands for the US and EU and will ship the open orders right away.


      After fullfilling the open orders there will be enough stock to fullfil new orders immediatly.


       

    -1 comment 263 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • New driver introduces the DriftMode

    • We are proud to introduce a new feature in our driver: The Drift Mode


      The Drift Mode reduces the overal resistance of the wheel and let you turn the wheel more easy. It almost works like a power steering. It reduces the basic dampeing of the wheel.


      You can adjust several values and we are still experimenting a bit with the values so you have a lot of choice in the attached Beta version of the driver.


      At the moment we only have a 32 bit version but once this feature is settled we will release a certified 64 bit version.


      Please note that I recommend to turn on the "dampening strength" now as this just controls the signals sent from the game. For example if you drive through muddy water.


      Please let me know your feedback on this feature. Thanks!


       


       

    -1 comment 261 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWTS Pre-production started

    • We just started the pre-production of the 911 Turbo S wheel.


      It took a little bit longer than expected but Microsoft wanted us to support a new feature for Forza 2.


      The wheel will be shown at the E3 on June 2nd in Los Angeles and we
      will also send the first units to customers and testers soon.


      We made it possible to fully flash the electronics
      so we can add new features or solve bugs if there were some we did
      not find yet.

    -1 comment 220 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Sebastian Vettel signs Porsche wheel for charity
    • I met Sebastian Vettel and a bunch of other great drivers at the "Fullgas" event of Heinz Kinigadner last friday in Austria.


      image

       

      Basically there were almost all Red Bull sponsored race cars and bikes on display and it was a great show with freestyle MX, airshow, Nascar demo and lot more.

      The event was a charity event for http://www.wingsforlife.com. This foundation tries to find a way to help people with Spinal Cord Injury (SCI). Unfortunatly this is a very popular injury among race drivers.

      Sebastian is in reality as sympathic as he appears on TV and he was very positive to the idea of signing our new GT3RS wheel. I have no doubt that this is the signature of an upcoming F1 world champion.


      We want to give away this wheel in favour of the wings for life foundation. One option is to make an auction but perhaps we could also make a 24h race or something similar. Suggestions are welcome.

       

    -1 comment 332 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • New PW driver released (Beta)

    • Please try out the the new version 082 of the PW driver. These are the things which changed:

      • Fixed bug with Autocentering in rFactor
      • rFactor display support
      • Added GT3RS and PWC menues
      • CSP support
      • Map vibration to the revs instead of Gas
      • map vibration to indicate shifting point 


      Known Issues which we are working on

      • 64 bit signature
      • Vista problem: Game controller does not show axis or buttons when pressed
      • shifting indicator not working properly


      Please let me know your feedback right in this thread.


      The driver will only be available to download here from this post.

    -1 comment 263 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWGT3RS and CSP are on the way to Europe

    • The first shipment has finally left China and is on the way to Europe.


      This menas that there is another small delay as the products will arrive in Europe in early May and will be send out to customers immediatly.


      The US shipment will be sent next week but shipment to US is one week shorter so that both territories will get it at the same time.


      We had to rework the CSP as we were not 100% satisfied with the quality of one component but now everything is fine and you can be sure to get a perfect product.

    -1 comment 205 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • Affilliate program: Cookie life time extended

    • As an affiliate partner only gets a commission if we ship products  we now changed the duration between the first click and the sale (shipment) from 60 days to 600 days. We will change that back to 60 once we can ship all units in time.


      Now the affiliate partner can be sure that a sale is not lost because we are shipping too late.

    -1 comment 274 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • PWGt3RS and CSP: First shipment sold out

    • The shipment which arrives in April is completely sold out!


       


      thanks to all your trust in this new product and to purchase it without even reading tests about it.


       


      Unfortunatly it will take quite a while until the next shipment will arrive in June.


      This affects the wheel and the Clubsport pedals as well as the bundle.


       


      We really need to ramp up the production...


       


       

    -1 comment 226 views 0 comments Started by Thomas Jackermeier Subscribe to this blog
  • 911 GT3 RS production started but delayed

    • We successfully started the production of the Porsche 911 GT3 RS wheel this week but due to a problem with the cooling system of the motor we had to delay the production.


      The delivery will be delayed for one month until end of April. The Clubsport pedals are affected as well because the two products will be shipped together.


      As soon I have pictures I will show them to you.


       


       

    -1 comment 207 views 0 comments Started by Thomas Jackermeier Subscribe to this blog