as the launch of ACC for PS4 is imminent are there already recommended settings for the PS4? Or are they the same as for PC?
I tried the pc setup and it worked horrible. The steering angle doesn’t work properly no matter how I setup the settings. Also the force feedback doesn’t work correct. I really hope an update can solve this issue.
im using the same setup as the old assetto corsa on dd1 but my v3 pedals keep on vibrating the whole time i dont know why.
game is very very bad, FF wise.
i hope someone from fanatec can help us with this.
Tried today on my racing teams set up in Dragon HQ the PC game with CSW 2.5 and V3 pedals and feedback was very good.
But haven't got any details on set up etc.
I hope it is the same in PS4 cause just downloaded it. 😇
Going to do a test run tonight.
FYI I hated all the previous Asseto's in PS4.
Hey guys, same problem here with the v3 pedals and CSL base. As soon as the car starts moving both vibra turn on max speed. FFB is also terrible so far. Any suggestions..?
Try these settings:
Wheel base Csl Elite PS4 firmware 672/v22
Min. force: 0
road effects: 0
Steer lock : 900
SEN: depend on car
BLI, SHO,BRF -user performance
Car's turning angle (SEN):
1. Aston Martin – 064
2. Audi R8 – 090
3. Bentley Continental ‘15/’18 – 064
4. BMW M6 – 064
5. Jaguar – 072
6. Ferrari 488 – 052
7. Honda NSX – 064
8. Lamborghini Huracan GT3/ST – 072
9. Lexus RCF – 072
10. McLaren 650s – 052
11. Mercedes AMG – 064
12. Nissan GTR ‘15/’18 – 064
13. Porsche ‘17/’18 – 080
14. R-EX – 074
I hope it will help
V3 pedals and podium on ps4 here
same problem with the pedals
seems like rpm is connected to the throttle and the brake motor just keeps rumbling even when i pause the game
it’s like driving with a buttkicker attached to your feet
I’m afraid this will shorten the lifespan of the motors
In the acc forums someone claimed to have fixed the problem updating the v3 firmware
Did not work for me
any recommendation for dd1 settings?
and how to fix the issue with my v3 pedals vibrating none stop
Keeping an eye on the thread in case any other settings or feedback become available
Thanks, quite the same settings I tried. I only drove the huracan evo but had to set SEN to 610 to line up..? It seems that the steer lock setting in game (90-1080) has no effect at all
Still, it doesn't feel good at all and the input lag is also ridiculous :(
The clutch doesn't work either although I activated it in the settings (which was only possible after activating manual motor start)
ACC is a pretty disappointing experience so far..
Hi, I have the same problem at Clubsport V3. The rumble of the accelerator continues to vibrate with all the cars while the ABS rumble never works !!! The software is updated but the problem continues ... how can we solve it? So it is impossible to play !!!
I believe that the ACC Console issues seems to be with the game sadly...
I'm meanwhile using the CSL Elite PS4 base with the following settings (derived from Pawels recommendation) and it feels quite good:
Steer lock : 540
BLI, SHO,BRF -100
Yes, unfortunately they are sadly related to the game that is full of bugs!
I also have the fanatec csl elite PS4 with the V3 but I don't have BLI what would it be? Thanks you
I confirm! The problem of motor vibration is solved with beta driver 365!!!
I have already updated to Beta driver 365 but the problem is still here.
im still using the original update 346, i had 365 but my dd1 was crashing sometimes. let me know if the vibration of your v3 pedals is gone on the 365 beta update.
Yes, with the 365 update I solved the problem of pedal vibration and the ABS has returned to work regularly
alright, youre using a direct drive ?
yes issue is solved after updating to 365, pedals are not vibrating anymore
I was found some interesting.
First downgrade to 620(v328) engine v22.
Most important to turn off wheel and start ACC by dualshock controller ,then you need to go to track (not in pause menu) turn on the whell, then in options choose whell.
BRF: user performance i have 50
Also update Car's turning angle (SEN):
Aston Martin – 064 (600)
Audi R8 – 072 (720)
Bentley Continental ‘15/’18 – 064 (640)
BMW M6 – 056 (560)
Jaguar – 072 (720)
Ferrari 488 – 048 (480)
Honda NSX – 062 (620)
Lamborghini Huracan GT3/ST – 062 (620)
Lexus RCF – 064 (640)
McLaren 650s – 048 (480)
Mercedes AMG – 064 (640)
Nissan GTR ‘15/’18 – 064 (640)
Porsche ‘17/’18 – 080 (800)
R-EX – 072 (720)
Play ACC, set the PS4 to "sleep mode" and switch off the CSL, wake up the PS4 and switch on the CSL and there will be good FFB in the end...
How can Fanatec be advertised within this game but their top of the range wheel doesn’t work whatsoever in the game.
worst FF ever, rumble motors are on full tilt as soon as you start moving and yet again no settings for the game at release. Those above who say 365 cures the rumble clearly aren’t using a DD wheel. I have updated and can confirm 100% the update makes no difference.
Why I bother buy new games to use this wheel on is beyond me, wait till it’s a year old then buy it and you might just get lucky that the wheel will operate correctly by then.
ill leave it for three months then try again, Someone may have woken up by then........
You can solve rumble mortars issue with following procedure.
1.After booting ACC with DD wheel and wait for AAC title is displayed.
2.Turn off DD base
3.Turn on again DD base
4.Login ps4 with DD wheel
5.Play ACC being booted previously
I’m not sure whether waiting for displaying acc title is required.
In actually just reboot DD base while playing ACC works fine.
tried the above but the motors still keep spinning, gutted to be honest because I’ve got the FFB feeling good. Can’t play with motors doing that thou.
back to the arcade game that is GT Sport I guess :(
Hmm, I’m able to stop rumble motors with my instruction in my every play.
Alternative solution is plug out pedals and plug in again while playing ACC.
Playing same game session with previous ACC boot is important.
Im using driver 346 and podium racing wheel F1 with csp v3.
im running the new 365 beta update, and everything is working fine
It may well work for you both but I can guarantee you it isn’t working here. Even when I exit ACC my rumble motors continue to rumble, I have to turn off my podium DD to stop them.