It's already on the list because I intended it to be there already but they couldn't include it in time for the first beta version on the forum. Had another look and it will be done soon.
The Fanatec App for iOS and Android which is already available is not yet compatible to the new Fanatec App (PC) but will be made compatible until summer.
Downloaded the app today March 27th, my shifter appears in the app, connected via the USB adapter, but my pedals (V3i) and handbrake (v1.5) connected to the pedals via usb are not showing up in the app
That's correct I do not have a Fanatec wheelbase anymore, I managed to get it to connected, I unplugged them and plugged them back in with the app open and they connected, the shifter had to be activated by switching gears, the handbrake shows on the pedal info screens but not in the device list on the left hand side, when I tried iracing the pedals and shifter disconnected from the app when I entered the car but they were still available in-game and it looks like I'll have to do the unplug/replug the pedals again for the app to recognize them again.
I tested after I got them connected if they'd show up after closing the app and reopening it before trying iracing, they were present when I reopened the app, but after they disconnected in iracing they were not present upon reopening the app, so it looks like I'll have to unplug them and then plug them back in to get them to be recognized again.
I am so surpised that Corsair had done nothing for these talks about this and that coming some firmware later on year, ths and that is not our problem, microsoft problem, this and that app not wokring because this and that ... lot of talk, would expect that Corsair would change things to happen, not some promise and talk about that not fanatec fault.
Just silly if you cannot use two monitors with fanatec software... if it is going to jump all over screens and resizing by its own time without user approval. Just poor progrrraming, stupid programmng. Why those programmers think that they knew every scenarios where users are using these softwares, I am just so annoyed about that. But I use linux and every piece of software are pricise in the place what I want, by pixel, pixel, Not going anywhre, not resizing, not popupping .. not software to decice where I want my apps are.
Su disappointed when reading this forum about various things which are not working and there will be any work for those things... just talking and talking and explaining this and that.. for months, for years.
I asked this question in other page of this forum, and my understanding is that you can't currently disable the Fanalab features within the new FanatecApp, so you can't run the new FanatecApp drivers with the standalone Fanalab 2.01.xx package.
Currently the FanatecAPP doesn't have working RPM LED support, that is to come in future.
Recommend to stay with you current working setup if you still want to fully use your Fanalab features correctly.
Comments
Hello, can the mobile app work with this new interface? I haven't found one, how can I activate it?
OK thank you
Hi, just tried the App but its impossible to start iRacing with it. I can't change the folder and a steam ID is always required, don't know for what.
If I try to add iRacing manually it doesnt work.
Kind regards :)
It's already on the list because I intended it to be there already but they couldn't include it in time for the first beta version on the forum. Had another look and it will be done soon.
The Fanatec App for iOS and Android which is already available is not yet compatible to the new Fanatec App (PC) but will be made compatible until summer.
Thanks for the report, we are aware of this and working on fixing the detection and starting of iRacing.
Downloaded the app today March 27th, my shifter appears in the app, connected via the USB adapter, but my pedals (V3i) and handbrake (v1.5) connected to the pedals via usb are not showing up in the app
So I assume you don't have a Fanatec wheel base connected at the same time right?
We'll have a look, thanks for the report.
That's correct I do not have a Fanatec wheelbase anymore, I managed to get it to connected, I unplugged them and plugged them back in with the app open and they connected, the shifter had to be activated by switching gears, the handbrake shows on the pedal info screens but not in the device list on the left hand side, when I tried iracing the pedals and shifter disconnected from the app when I entered the car but they were still available in-game and it looks like I'll have to do the unplug/replug the pedals again for the app to recognize them again.
I tested after I got them connected if they'd show up after closing the app and reopening it before trying iracing, they were present when I reopened the app, but after they disconnected in iracing they were not present upon reopening the app, so it looks like I'll have to unplug them and then plug them back in to get them to be recognized again.
I am so surpised that Corsair had done nothing for these talks about this and that coming some firmware later on year, ths and that is not our problem, microsoft problem, this and that app not wokring because this and that ... lot of talk, would expect that Corsair would change things to happen, not some promise and talk about that not fanatec fault.
Just silly if you cannot use two monitors with fanatec software... if it is going to jump all over screens and resizing by its own time without user approval. Just poor progrrraming, stupid programmng. Why those programmers think that they knew every scenarios where users are using these softwares, I am just so annoyed about that. But I use linux and every piece of software are pricise in the place what I want, by pixel, pixel, Not going anywhre, not resizing, not popupping .. not software to decice where I want my apps are.
Su disappointed when reading this forum about various things which are not working and there will be any work for those things... just talking and talking and explaining this and that.. for months, for years.
I'm curious to try it, but can I still run FanaLab 2.01.6?
I don't mean at the same time obviously...
I just want to make sure if I install this new beta software it doesn't mess up what's working fine for me now.
Thanks,
FP
I asked this question in other page of this forum, and my understanding is that you can't currently disable the Fanalab features within the new FanatecApp, so you can't run the new FanatecApp drivers with the standalone Fanalab 2.01.xx package.
Currently the FanatecAPP doesn't have working RPM LED support, that is to come in future.
Recommend to stay with you current working setup if you still want to fully use your Fanalab features correctly.
@MadDog-IC Thank you!