Automobilista (PC) - Fanatec Recommended Settings

General Notes:
- The settings below are considered to be reasonable baseline values for Automobilista (PC). They might not suit all tastes and driving styles, but they are a good starting point. Bear in mind that Automobilista uses a dynamic physics engine covering a broad range of cars and tracks, meaning that these settings might not be 'optimal' for every possible driving scenario.

- In order to apply the suggested settings correctly, it is important to assign both the Tuning Menu values AND the suggested In-Game settings together.

- For the Podium Series settings, it is assumed that the Torque Key is being used.

- Fanatec wheel bases require an 'inverted' FFB signal from Automobilista - note the 'minus' value for the in-game 'Force Feedback Strength' setting.

- Please ensure you are using the latest firmware for all Fanatec devices.


Podium Wheel Base DD1 / Podium Racing Wheel F1® PS4™

Tuning Menu Settings:
SEN AUT
FF 45
SHO 100
ABS User Preference
FOR 100
SPR 100*
DPR 100*
NDP 25
NFR 5
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


Podium Wheel Base DD2

Tuning Menu Settings:
SEN AUT
FF 45
SHO 100
ABS User Preference
FOR 100
SPR 100*
DPR 100*
NDP 25
NFR 5
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


ClubSport Wheel Base V2

Tuning Menu Settings:
SEN AUT
FF 100
SHO 100
ABS User Preference
DRI 002
FOR 100
SPR 100*
DPR 100*
BRF User Preference

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


ClubSport Wheel Base V2.5

Tuning Menu Settings:
SEN AUT
FF 100
SHO 100
ABS User Preference
DRI -02
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


CSL Elite Wheel Base

Tuning Menu Settings:
SEN AUT
FF 100
SHO 100
ABS User Preference
DRI 003
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 100

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


CSL Elite Wheel Base V1.1 / CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4™

Tuning Menu Settings:
SEN AUT
FF 100
SHO 100
ABS User Preference
DRI -03
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 080

*SPR and DPR values have no effect.

In-Game Settings
Controller Type: Wheel
Auto Steering Rotation: On
Force Feedback Effects: Pure 180Hz
Force Feedback Strength: -75%
FFB Low Force Boost: 0%
Steering Speed Sensitivity: 0%
Steering Rate: 100%
Throttle Rate: 100%
Brake Rate: 100%
Clutch Rate: 100%


Comments

  • edited May 1
    Automobilista dosnt work here with the dd1, steering works but the ffb is reverse and there is no ingame option to change.

    EDIT: solved.    the ffb slider works into both directions, from -100% to +100%  :) i thought it was 0-100

  • Indeed the inverted slider is a bit confusing in this game. I've edited the description to make this clearer.
  • Why Pure 180Hz and not 360Hz in Force Feedback Effects?
  • Why Pure 180Hz and not 360Hz in Force Feedback Effects?
    Good question. I have it at 360Hz and it's fine.
  • Why Pure 180Hz and not 360Hz in Force Feedback Effects?
    Good question. I have it at 360Hz and it's fine.
    it's fine either with  720hz on the modified ini file... 
  • edited September 8
    I was trying AMS with the recommended settings, but every car had real heavy steer with that. So I adjusted it a bit on my own. I think this is a fair one: 

    Tuning Menu Settings:
    SEN AUT
    FF 55
    SHO 100
    ABS User Preference
    DRI -02
    FOR 100
    SPR 100*
    DPR 100*
    BRF User Preference
    FEI 80

    *SPR and DPR values have no effect.

    In-Game Settings
    Controller Type: Wheel
    Auto Steering Rotation: On
    Force Feedback Effects: Pure 3600Hz
    Force Feedback Strength: -100%
    FFB Low Force Boost: 0%
    Steering Speed Sensitivity: 0%
    Steering Rate: 100%
    Throttle Rate: 100%
    Brake Rate: 100%
    Clutch Rate: 100%

    It's not too heavy, but also not too light. Kerbs and such comes nicely tru. 
  • edited September 25
    hi ,  
     after updated latest automoblista (1.5.24 & 1.5.26 )  ,   i can't use my wheel ( DD ps4 wheel base  )  , shown correct wheel name , 

    but no functions.

    is someone having same issue ?    

    ( tried disable & enable FanaLAB & uninstall FanaLAB , but still not working.  ) 

  • edited September 25
    hi ,  
     after updated latest automoblista (1.5.24 & 1.5.26 )  ,   i can't use my wheel ( DD ps4 wheel base  )   , shown correct wheel name , 

    but  no function.

    is someone having same issue ?    

    ( tried disable & enable FanaLAB & uninstall FanaLAB , but still not working.   ) 


  • i have the same issue on DD1pc 346-662-30
    device input joy1 function buttons joy 2 ?
    i think this is the probem

Sign In or Register to comment.