Hi Maurice & Marcel, just an observation after upgrading from 455 to 462 on my DD+. During a race yesterday I experienced a jerk/knock from the wheelbase and the force feedback immediately felt a bit weaker and the details mushy. It does seem to resume to normal after a few mins or it could be I have closed and start up another session. I have not experienced this on 455 before. Also take note that I did not have disconnection issue on 455, I upgraded to 462 to fix the wheelbase not detecting the PBMR issue and it did fix it. Just want to check with you guys if this has been reported or observed by other users?
Interesting to hear about ITM. Does this also apply to FullForce?
I don't suppose you could give a very rough estimate for when ITM and FullForce might be coming to GT7 / DD+? Can't wait!! :)
FWIW, my DD+ with driver 455 works fine, so I'm a bit hesitant to switch to 462 now. My understanding is that 462 doesn't give me any new features or improved performance/quality, right? So if 455 works fine for me, there's probably no need for me to update right now?
But congrats on finally having managed to fix the connection issues some users had. Being a dev myself, I can imagine how relieved your whole dev team must be, after having fought with the problems for so long.
How's this with CSL DD/pro? Anyone tried yet / reasonable good or with some problems? On the other hand 154 (if I remember right which driver I have just now...) is just fine with CSL DD Pro. I use base on all platforms, PS5, XsX, PC.
Hello Richard, thank you for your reply. I have done the update 462 and no problem the driver works well but I still have this problem with the FEI that I can not put to 100% because there are huge vibrations and tremors inside the base even by lowering it a little, but it is another subject so I will create a discussion about it on the forum and thank you again for your help.
This has been the case at least since April. Why hasn’t this been addressed? IMO this needs to be put in the product listing as incompatible. I paid for a product with a feature that doesn’t actually exist. It’s false advertising.
I guess I am trying to understand whether there is intent and a plan for the button lights on the very expensive BMW wheel to work well with the Clubsport DD +. Thanks.
Have a ClubSport DD, Pedals v3, and Shifter v1.5 with 462 and all firmware installed.
Only major issue is APM upper paddles not working on a UHUB v2.
Don't know if your supporting older wheels, the Type F adapter was never released for QR1, however I have converted them all with QR2 adapters and my testing follows.
Porsche 918 RSR is recognized and all buttons and shifters work perfectly.
BMW M3 GT2 v1 also is recognized and all buttons work. I have removed the shifters but expect they also work.
Can't test my Formula Carbon right now.
Universal Hub v1 is recognized as a XBOX version. All buttons work however the shifters (buttons 6 and 5), do not. If you press the buttons 12 and 11 on top of the hub, the shifters are illuminated as being pressed. Hope this can be fixed.
Yes, this means 462 is now "official". The update notifications will be triggered next week as it needs some change in the backend and now is weekend and everyone is at the Expo ;)
Hi, this is my first problem with my Fanatec DD2 and I hope someone can help, please!
Coming from Driver version v456 and updating to Driver v462...I uninstalled Driver v456 (I've done this forever) and restarted my PC. I then clicked on Fanatec_64_driver_462_rev1.msi and halfway through the update I got this Error message! I rebooted 3 times and still the same Error. Can anyone help with this please? Thanks :)
Tested with ACC only. The error occurred with the Porsche steering wheel, now I'm testing it with the old blue F1 steering wheel, so far it's good there. Today there will be a 90-minute FUN race, where he will be tested further.
I'm using an ClubSport DD+ with Driver 457 (no issues) and all other drivers are up-to-date to.
Everything works perfect BUT I have an problem with my Universal Hub (CS-UH v2) in combination with the APM. Everything works except the additional up- and down shifters. I searched for the problem on the internet and recognized that i'm not the only one (see link below). Will this problem be adresses with future firmware updates?
Try disconnecting everything from USB ports, and most importantly Fanatec devices, leaving only mouse and keyboard. Temporarily disable any antivirus protection, including windows built in tool. Try to install the package now.
Comments
Lol well that fire was put out quickly ;-)
updated from 456 to 462 (wheel, pcb, base) had disconnection issues around every 30 min. so far no problems
CS DD+
Hi.
thanks for the updated software. Is there a plan to fix the rally button module led screen (for example gear shifts in EA rally)?
also, are all issues resolved with the BMW M4 GT3 Lights?
thanks.
Hi Maurice & Marcel, just an observation after upgrading from 455 to 462 on my DD+. During a race yesterday I experienced a jerk/knock from the wheelbase and the force feedback immediately felt a bit weaker and the details mushy. It does seem to resume to normal after a few mins or it could be I have closed and start up another session. I have not experienced this on 455 before. Also take note that I did not have disconnection issue on 455, I upgraded to 462 to fix the wheelbase not detecting the PBMR issue and it did fix it. Just want to check with you guys if this has been reported or observed by other users?
does this jerk/knock happen in ACC ? someone talked about clipping
Interesting to hear about ITM. Does this also apply to FullForce?
I don't suppose you could give a very rough estimate for when ITM and FullForce might be coming to GT7 / DD+? Can't wait!! :)
FWIW, my DD+ with driver 455 works fine, so I'm a bit hesitant to switch to 462 now. My understanding is that 462 doesn't give me any new features or improved performance/quality, right? So if 455 works fine for me, there's probably no need for me to update right now?
But congrats on finally having managed to fix the connection issues some users had. Being a dev myself, I can imagine how relieved your whole dev team must be, after having fought with the problems for so long.
How's this with CSL DD/pro? Anyone tried yet / reasonable good or with some problems? On the other hand 154 (if I remember right which driver I have just now...) is just fine with CSL DD Pro. I use base on all platforms, PS5, XsX, PC.
Hello Richard, thank you for your reply. I have done the update 462 and no problem the driver works well but I still have this problem with the FEI that I can not put to 100% because there are huge vibrations and tremors inside the base even by lowering it a little, but it is another subject so I will create a discussion about it on the forum and thank you again for your help.
Any idea on these two items? Thx
1st: No, EA needs to add an option to disable the native LEDs so we can enable them in FanaLab.
2nd: No.
must downgrade to 455,why？？？
This has been the case at least since April. Why hasn’t this been addressed? IMO this needs to be put in the product listing as incompatible. I paid for a product with a feature that doesn’t actually exist. It’s false advertising.
I guess I am trying to understand whether there is intent and a plan for the button lights on the very expensive BMW wheel to work well with the Clubsport DD +. Thanks.
Yes
Have a ClubSport DD, Pedals v3, and Shifter v1.5 with 462 and all firmware installed.
Only major issue is APM upper paddles not working on a UHUB v2.
Don't know if your supporting older wheels, the Type F adapter was never released for QR1, however I have converted them all with QR2 adapters and my testing follows.
Porsche 918 RSR is recognized and all buttons and shifters work perfectly.
BMW M3 GT2 v1 also is recognized and all buttons work. I have removed the shifters but expect they also work.
Can't test my Formula Carbon right now.
Universal Hub v1 is recognized as a XBOX version. All buttons work however the shifters (buttons 6 and 5), do not. If you press the buttons 12 and 11 on top of the hub, the shifters are illuminated as being pressed. Hope this can be fixed.
Hi Guys,
I see the website's Driver page has been updated with the 462. Does it mean that this is now the officially released driver?
I am asking, because the PC app does not detect any new downloadable firmware (still using 455) when I click Check for Update.
Thanks a lot!
Upper APM paddles not working on CS DD is a known firmware issue to be fixed at some point in the future.
Yes, this means 462 is now "official". The update notifications will be triggered next week as it needs some change in the backend and now is weekend and everyone is at the Expo ;)
Unfortunately, the error occurred again. After an hour of racing, the FFB switched off, and switching was not possible.
Going back to update 454, it didn't turn off the wheel there.
I want to believe you meant "Hi gUys".
Yes, I'm so sorry!
I wrote it wrong. Guys...
@Fülöp Béla FFB Disconnections in ACC only? Also tested with GT7?
Any of us that downloaded few days ago no need to again? Same thing ?
Yes, same same.
Hi, this is my first problem with my Fanatec DD2 and I hope someone can help, please!
Coming from Driver version v456 and updating to Driver v462...I uninstalled Driver v456 (I've done this forever) and restarted my PC. I then clicked on Fanatec_64_driver_462_rev1.msi and halfway through the update I got this Error message! I rebooted 3 times and still the same Error. Can anyone help with this please? Thanks :)
Hello!
Tested with ACC only. The error occurred with the Porsche steering wheel, now I'm testing it with the old blue F1 steering wheel, so far it's good there. Today there will be a 90-minute FUN race, where he will be tested further.
Remove the steering wheel, update only the base first. When the BASE and QR are updated, then put the steering wheel up.
I'm using an ClubSport DD+ with Driver 457 (no issues) and all other drivers are up-to-date to.
Everything works perfect BUT I have an problem with my Universal Hub (CS-UH v2) in combination with the APM. Everything works except the additional up- and down shifters. I searched for the problem on the internet and recognized that i'm not the only one (see link below). Will this problem be adresses with future firmware updates?
https://forum.fanatec.com/discussion/30174/apm-xbox-hub-v2-issue
Yes, its a known firmware issue to be fixed at some point in the future.
Try disconnecting everything from USB ports, and most importantly Fanatec devices, leaving only mouse and keyboard. Temporarily disable any antivirus protection, including windows built in tool. Try to install the package now.