Yes and everytime you start ACC this profile will be loaded -with %. Next time you start Fanalab it's intended to restart with RPM until the profile was loaded again.
I have adjusted the lights on the base to come on above the rpm range of the vehicle. Sometimes it works and the lights stay off. Sometimes they come on with the wheel lights. It is very inconsistent.
I have a feature request or at least I didn't see an option for that.
I have the Porsche GT3 R wheel with Podium Endurance Module and the leds are really bright. A lot brighter than my F1 wheel. My room isn't very well lit so I'd like to dim the leds a bit. And when I do night races, I turn the lights off in my room to stop the reflections on the dark monitors and it's more immersive. Except that I'm now blinded by the LED on the endurance module :p
So it would be awesome if we could change the brightness to a lower value.
As you can see from the report, it seems the GameTelemetryExtractor.dll is the faulting module. This is the same for every crash of Fanalab I've had. Could be conflicting with the VRS Telemetry logger I have running as well?
I have Problem with ITM Page, i activated ITM and set the analysis Screen to Standard so that only the Fanatec logo is displayed on my base. No other Screen is Marked. But as soon as I sit in the car it changes to one of the other 5 displays, although not marked in Fanalab. I just want to access the information manually from time to time and have the Fanatec logo as standard without disabling the ITM menu.
Under Game Profile Preview it says Auto switch on Lap change, Auto switch on Position Page etc. activated. How can i deactivate this?
This happens in Iracing, with DD1 and Formula V2 Wheel, CSP V3
when I connect my V3 pedals direct to PC, I can't adjust the brake force any more in Fanlab, and on the Fanalab device page the pedal pic is shown twice, as V3 (wheel base) and again as V3 pedals, is this correct and how top adjust the Brake Force? Connecting the V3 pedals into the wheel base, the brake force is adjustable.
updating to driver 4.00 the Update Assistant is not evene starting any more
I deinstalled, installed and repaired the drivers several times, no success.
Comments
And this is straight after opening Fanalabs
Yes and everytime you start ACC this profile will be loaded -with %. Next time you start Fanalab it's intended to restart with RPM until the profile was loaded again.
Which is, again, the intended behaviour because the profile with % first has to be loaded one time again.
I think i found it. It is something to do with these check boxes - i think they determine what is saved for the profile
Curious... Why is adding the Orange LED option taking a long to implement...?
Because it's more than just orange.
aha I see... Nice!
thanks Maurice
Is there a way to turn off the csl elite LEDs? I prefer using just the lights on the wheel.
No that is not possible
I have adjusted the lights on the base to come on above the rpm range of the vehicle. Sometimes it works and the lights stay off. Sometimes they come on with the wheel lights. It is very inconsistent.
I have a feature request or at least I didn't see an option for that.
I have the Porsche GT3 R wheel with Podium Endurance Module and the leds are really bright. A lot brighter than my F1 wheel. My room isn't very well lit so I'd like to dim the leds a bit. And when I do night races, I turn the lights off in my room to stop the reflections on the dark monitors and it's more immersive. Except that I'm now blinded by the LED on the endurance module :p
So it would be awesome if we could change the brightness to a lower value.
Thats a planned feature for sometime in the future. :)
Greetings,
Fanalabs has been crashing quite a bit lately. At least once every 2nd session. Here's a snip from the AppCrash_FanaLab.exe report file:
As you can see from the report, it seems the GameTelemetryExtractor.dll is the faulting module. This is the same for every crash of Fanalab I've had. Could be conflicting with the VRS Telemetry logger I have running as well?
Thought I'd let this forum know.
Cheers!
Thanks Ensi, THIS finally fixed the problem and FanaLab now finally works!
Great to hear that.
And many thanks for reporting!
Hi all,
This happens in Iracing, with DD1 and Formula V2 Wheel, CSP V3
Thx in advance
You need to disable all the green auto-page-switch Icons in the ITM Tab and save the profile, this will fix both your issues.
Wow, if u know what u can click its easy ;)
That was the Trick Thx a lot.
I`d like to see a pictured Manual of Fanalab.....
New FanaLab version 1.54.3 uploaded (hotfix)
Hi, I would have 2 questions
I deinstalled, installed and repaired the drivers several times, no success.
Thanks for help and advices
You can only adjust BRF when the pedals are connected to the base directly. It was always like that and will always be like that ^^
Hi.
I'm very new top this & love all my Fanatec stuff. Can somebody explain to me hoe all this Fanalab stuff works please? I don't fully understand it.
Thanks
thanks for your reply Maurice, since I am using your base setting and profiles, means you have the pedas connected to the base as well, correct?
Correct. Makes no Sense to connect csp via USB.. ;)
thank you very much for your clarification, thanks.
Nobody can explains this in words. You need to watch Youtube tutorial.
Hi,
I have a CSW 2.5 with the Formula V2 wheel.
I have the latest drivers and fanate software.
After a short while driving in iRacing, the RPM leds on the steering wheel will just get stuck in a certain position. Fanalab crashes at that moment.
I am running the VRS Telemtry logger as well, perhaps this has something to do with it ?
Hello Maurice,
Could you give me the exact RPM value for the P217 and iR-01 please?
Oli
P217 has different RPM values for each Gear:
iR-01:
Thank you very much Maurice.
I will test it tomorrow.
Good night.
Oli