With a Good wheel Tune i can See that PCars has Major Potential when they get the wheel FFB Fixed!!! With the FFB Tune I cam up with you can feel that they Have Good Physics in the Game Tire Chatter, Kurb Feel, Weight Transfer ETC... But the their FFB Settings wont work together to bring out the FFB feel too Many Redundent settings that Counteract each other.... You Have to Turm Most everything off to get Good Feel because every Setting Damoen s another Setting.
i just did the update and started up project cars on ps4 hit the purple button for pc mode and the wheel is frozen. When i turn it off its smooth as silk so i dont think its mechanical.Its just locked up as soon as i turn it on now and i cant get it to unlock until i turn the base off.Any ideas? Thanks for the help
I make GT2 works with Project Cars on PS4, as it should, but It continues to crasch the game (error CE-34878-0) as with the original firmware.
Following history of test
These are files of GT2 last firmware (rev.756): GT2_754B.pw1 GT2_Base_756.pw2 ERASE.pw3
These are CSR last firmware files(rev.756): CSR_756B.pw1 CSR_756B.pw2 ERASE.pw3
You could note a light difference in pw1 version between GT2 and CSR firmware I just forced the CSR pw1 firmware files install in GT2 so It is recongized from game as CSR but have the buttons configured as GT2. In this way I can use (except for the clutch bug of the CSR (you have to assign it to a button)) my Frankestein GT2 in Project Cars PS4 version. It is recongized as a wheel with all configuration and FF menus enable. The wheel works fine but random the game crash with error CE-34878-0
Then I mapped the buttons in a way I could use the whell with both files of CSR firmware; i reflash my GT2 with following files: CSR_756B.pw1 CSR_756B.pw2 ERASE.pw3 (CSR File) Because I before mapped the clutch on button now I can use GT2 (masked as a CSR). The wheel works fine but again random I have error CE-34878-0 with crash of the game
Finally I re-flash the GT2 with its original firmware: GT2_754B.pw1 GT2_Base_756.pw2 ERASE.pw3 (Gt2 version)
The wheel is recognized as a gamepad, I have no wheel calibration menu and no FF calibration menu Also with original firmware Fanatec GT2 wheel makes Project Cars crashes with CE-34878-0 error.
I hope this information could be usefull to developers and Fanatec to resolve issues with GT2 wheels.
The v2 was running so amazing until i did the firmware update.i tried to run the firmware update again because the club sport v2 was still frozen after the first attempt to do the update download ..At the end of the up date it says restart wheel,i click on it, boot mode blue turns red the fans go on and its does its test cycle spinning and stops out of calibration flashing cal.on the led. unfortunately i cant calibrate it because its frozen rock solid again. This wheel is so incredible, its killing me to have it dead.I just bought a ps4 to play project cars and the update killed me,any other ideas?
The v2 was running so amazing until i did the firmware update.i tried to run the firmware update again because the club sport v2 was still frozen after the first attempt to do the update download ..At the end of the up date it says restart wheel,i click on it, boot mode blue turns red the fans go on and its does its test cycle spinning and stops out of calibration flashing cal.on the led. unfortunately i cant calibrate it because its frozen rock solid again. This wheel is so incredible, its killing me to have it dead.I just bought a ps4 to play project cars and the update killed me,any other ideas?
So sorry to hear. I've not had this issue. I'd use Fanatec new online tech support to get a fast answer. I wish you great luck!
Lisa Rocchi My V2 works Perfect on PS4 PCars only thing is Pcars FFB Sucks!!! I Hope they update it Soon.
You Should Try Re-Downloading the FW... the Files May Have Some how gotten Corrupted on your PC. also i would Run a Defrag on yoour PC Hard Drive to Make sure all the files are together propperly before Down loading and instaling the Fresh FW download.
It only Took Me 24hrs But i Finaly Have a Really Good FFB Tune for PS4 PCars!!!
FFB Master controle Panel Tire Force 100 Wheel Position Smoothing 0.04 Dead Zone Removal Fall Off 0.01 Linkage Stiffness 1.00 Relative Gain 108 or 113 Relative adjust Bleed 0.10 Relative adjust Clamp 0.96 ScoopKnee 70 Scoop Reduction 0.15
Some of these settings are the Same as the Tuning PDF they Seem Ok.... any Setting Not Listes has a Value of 0.
It only Took Me 24hrs But i Finaly Have a Really Good FFB Tune for PS4 PCars!!!
FFB Master controle Panel Tire Force 100 Wheel Position Smoothing 0.04 Dead Zone Removal Fall Off 0.01 Linkage Stiffness 1.00 Relative Gain 108 or 113 Relative adjust Bleed 0.10 Relative adjust Clamp 0.96 ScoopKnee 70 Scoop Reduction 0.15
Some of these settings are the Same as the Tuning PDF they Seem Ok.... any Setting Not Listes has a Value of 0.
Im Going to Spend the 3 day weekend Tweeking and Trying get a More Fine tuned feel out of it...But this feels like Really Good Starting Point. Im Happy with it... Sooo far \:D/
So far i Have Not Completed My First Series Race!!! Ive been Too busey Tweeking... My Profile says ive blayed.26hrs Now... Thats 99%Tweeking Time!!! LOL
You Have to enter this in every Car Tune on every Track!!! I dont do Save all Because the Cars Suspention tune is Different from track to Track and save all will save the Suspention tune to every track Not just the FFB Settings.
Try this too Grimey. Reset the wheel settings in controller menu, edit buttons again and DONT CALIBRATE THE WHEEL. Just start the game and edit Sens to your own linings PER CAR!!! Do a before reset and after reset with the McLaren F1 on circuit Zolder...I KNOW you'll have better car control through also better FFB
Antione i Reset the wheel Settings Every time i Plug in the Final New Settings... i set the DOR on the wheel i dont think PCars auto adjust the DOR per Car... if it does it doesnt feel like it.
I Have a Few Settings im Gonna Switch to see if it makes a Diff but the FFB Feel i Have is GOOD!!! Have you tried them??? If you Have a PS4 let me Know what you think... We Can all tweek together and get it Right. Those settings should work on every ststem + or - on the Masters.
I don't mean auto settings either. I just edit the sens/dor to my own liking per car. Haven't been on ps4 to try m Grimey. I don't know when I'll be on. Your in my FL..so we'll see when we can share settings.
It's a SIM guys...patch won't help doing FFB tweaking to your liking! Grimey...I've tried your settings but didn't feel good to ME. Heavy steering and less feel then Spades files.
It's a SIM guys...patch won't help doing FFB tweaking to your liking! Grimey...I've tried your settings but didn't feel good to ME. Heavy steering and less feel then Spades files.
I don't have any issue tweaking the setup. But it's the redundant tweaking that's a waste of time. And settings that over rule or negate a setting are just as bad. That's what needs cleaned up. IMO
I believe that the FFB defaults have been changed in the latest update for PC and these changes will follow through to the consoles too (in later patches) so FFB will always be a moving target.
I've been doing direct comparisons of PCars using the same car, same track, same settings, same hardware etc etc etc on all 3 platforms recently and I "can" say that Project Cars on "PC" is alright, however, I've stopped playing on console entirely until some patches/fixes are released.
I believe that the FFB defaults have been changed in the latest update for PC and these changes will follow through to the consoles too (in later patches) so FFB will always be a moving target.
I've been doing direct comparisons of PCars using the same car, same track, same settings, same hardware etc etc etc on all 3 platforms recently and I "can" say that Project Cars on "PC" is alright, however, I've stopped playing on console entirely until some patches/fixes are released.
Came 4th in the NG TT though
What are your main problems with the Fanatec CSW on the PS4, Natali?
I would really appreciate a reply to this question and you're in a unique position where you've compared them and I would love to know exactly what the PS4 version is lacking compared to the PC version.
And when you say "alright", I'm guessing you're not too impressed with Project Cars FFB on PC relative to other PC sims?
Jonathan Wilson i have Not Played FM5 with the V2 wheel but I Have Played it with the TX wheel and the FFB feel is Good with it... Imo if thenTX has Good Feel then the V2 should Feel Much Better.
I Havent done Much More Tweeking with the FFB Feel for PCars...but with the FFB settings i posted PS4 PCars is very Playable with how its set for the moment... I Hope they dont Screw it up with the Next update ( .... Ive deleted all of my game info and im doing a Fresh install because when you do save all it Saves Not just your FFB settings for the Car to every track but it also saves the Same Car set up to Every Track and the Car tunes vary on a per track basis!!! LOL ive had the Game 2 weeks and all ive done was tweek FFB so resetting didnt realy Bother me. But i want a Fresh install before i start going to deep in the Career Mode just incase all the Tweeking and resetting threw something outta wack..... Lets set up some Races.
Comments
If that doesn't work, use the Tech chat support function
You Should Try Re-Downloading the FW... the Files May Have Some how gotten Corrupted on your PC. also i would Run a Defrag on yoour PC Hard Drive to Make sure all the files are together propperly before Down loading and instaling the Fresh FW download.
FFB Master controle Panel
Tire Force 100
Wheel Position Smoothing 0.04
Dead Zone Removal Fall Off 0.01
Linkage Stiffness 1.00
Relative Gain 108 or 113
Relative adjust Bleed 0.10
Relative adjust Clamp 0.96
ScoopKnee 70
Scoop Reduction 0.15
Some of these settings are the Same as the Tuning PDF they Seem Ok.... any Setting Not Listes has a Value of 0.
In Car FFB Tuning Settings
Master Scale 50.0
FX 2.00
Fy 40.00
FZ 100.00
Mz 60.00
Arm Angle 1500 or what ever it is Stock as per car
Scoop Master Scale 50.0
Sop Lat 40.0
Sop Diff 100.0
any Setting Not Listed is 0
PS4 but Should work on XB1 also with Minor Adjustment... Let Me Know what you think.
I Have a Few Settings im Gonna Switch to see if it makes a Diff but the FFB Feel i Have is GOOD!!! Have you tried them??? If you Have a PS4 let me Know what you think... We Can all tweek together and get it Right.
Those settings should work on every ststem + or - on the Masters.
Haven't been on ps4 to try m Grimey. I don't know when I'll be on. Your in my FL..so we'll see when we can share settings.
Grimey...I've tried your settings but didn't feel good to ME. Heavy steering and less feel then Spades files.
I've been doing direct comparisons of PCars using the same car, same track, same settings, same hardware etc etc etc on all 3 platforms recently and I "can" say that Project Cars on "PC" is alright, however, I've stopped playing on console entirely until some patches/fixes are released.
Came 4th in the NG TT though
Natalie...as a beta tester...you can't stop playing on XOne with the new hub...hahahaha
Has FM5 good FFB feel support for the XOne hub Natalie ?
Ive deleted all of my game info and im doing a Fresh install because when you do save all it Saves Not just your FFB settings for the Car to every track but it also saves the Same Car set up to Every Track and the Car tunes vary on a per track basis!!! LOL ive had the Game 2 weeks and all ive done was tweek FFB so resetting didnt realy Bother me.
But i want a Fresh install before i start going to deep in the Career Mode just incase all the Tweeking and resetting threw something outta wack..... Lets set up some Races.