Hi, I don't know if the problem started with this version but I'm having a very weird problem with the LEDs on my Formula V2 wheel. The LEDs seem to be getting double inputs.. If I turn off the leds completely in the profile, the Leds still work. When I turn them on it looks like 2 inputs overlap (at a certain RPM the leds start to go up, then fall back again etc). I can't explain it better than that it looks like 2 sources of RPM inputs are send to the LEDs. Everything looks to be working normal when I turn off the leds in the profile but in this case I can't regulate the RPM of the LED off course since they are turned "off". Any Idea what might be causing this?
This happens when you did not followed the instructions given to you when you click on the two green buttons "Enable Telemetry" and "Enable FanaLab support" on the Game Profile Page because pressing those buttons is essential to get the in game LED support properly disabled so it does not interfere with the FanaLab LEDs.
Its the same as 1.63 regarding everthing else, only BMW features are new, yes.
But my newest profiles only work with 1.63.6.. And as it does not have any downsides compared to 1.63 I would say it should also be used for anyone else, not just for people who got the BMW ;)
It's a known issue of old belt bases with only 1 USB device ID (so CSW v1, CSW v2, CSL Elite v1 and CSL Elite v1.1). I assume you have one of these bases?
i'm stuck with 1.61.3 version. I already upgraded to 1.62.3 and it was working for 1 or 2 months, but now I have a KernerBase.dll and a .NET error (game crach after splashcreen) with version 1.62 an 1.63. I'm forced to downgrade to 1.63.1
Hi Maurice Böschen , first of all thanks for your great work
I just have a small issue with one of your ACC profil
i have everything up to date running on W10
DD2 and Podium Endurance Wheel
Every profiles work properly , i just have a problem with BMW M4 GT3 profil , the strenght is too high , only with this car, i use the correct in game settings, but i don't know why is too hard with this car only
Second question i see that all your profil are with formula V2 Wheel , any difference with Podium Endurance , if yes , how can i change it on Fanalab ?
Im having a problem in F1 2021 (PC) where all my led's that I set up in Fanalab work properly in Time Trial but when I go into my career or Gran prix when I leave my pit stall in practice and I get to the exit pit lane line I can not deactivate the pit limiter, I have no steering and my pit lane lights/ limiter stays on. Also no buttons work on the wheel and I have to use the keyboard to get into the menu. All that works is the gas and brake but the rumble on the brake pedal (clubsport v3) stays on when in the pits and leaving. When I close out Fanalab im able to leave the pits and everything works normal. The last time I played the game was December 2021 and January 2022 where everything worked fine so I am not sure if it was a Update with the game that they rolled out. If Fanatec needs anything on my end I'll be gladly to help to hopefully get this resolved. Have a great day.
Comments
Is BMW M4 wheel not available in Fanalab or am i missing something?
Not yet, no.
New Version with support coming soon.
But most important, have the problem with your profiles been solved?
Yes! :)
Very happy to hear that!
Hi, I don't know if the problem started with this version but I'm having a very weird problem with the LEDs on my Formula V2 wheel. The LEDs seem to be getting double inputs.. If I turn off the leds completely in the profile, the Leds still work. When I turn them on it looks like 2 inputs overlap (at a certain RPM the leds start to go up, then fall back again etc). I can't explain it better than that it looks like 2 sources of RPM inputs are send to the LEDs. Everything looks to be working normal when I turn off the leds in the profile but in this case I can't regulate the RPM of the LED off course since they are turned "off". Any Idea what might be causing this?
This happens when you did not followed the instructions given to you when you click on the two green buttons "Enable Telemetry" and "Enable FanaLab support" on the Game Profile Page because pressing those buttons is essential to get the in game LED support properly disabled so it does not interfere with the FanaLab LEDs.
Hmm I never even saw those buttons (I just downloaded pre-made profiles and imported them into Fanalab). But thanks, I'll have a look at it!
Available in the Share-Thread :)
So is v1.63.6 only for those that have the new BMW wheel?
Its the same as 1.63 regarding everthing else, only BMW features are new, yes.
But my newest profiles only work with 1.63.6.. And as it does not have any downsides compared to 1.63 I would say it should also be used for anyone else, not just for people who got the BMW ;)
Hey there :)
is it an known issue, or is it a problem from my side? When I use Fanalab with F1 2021 the yellow LEDs in fanalab will be blue on my wheel.
So when there is a yellow flag for example, its blue on my wheel. It seems like blue and yellow is switched.
It's a known issue of old belt bases with only 1 USB device ID (so CSW v1, CSW v2, CSL Elite v1 and CSL Elite v1.1). I assume you have one of these bases?
Yes exactly. I got the CSL Elite V1.1
Is there a workaround for it?
No there is no workaround.
You have to wait for a fix in the future.
Alright, thanks for the quick reply :)
Okay, good to know, does it only work with 440?
439 and 440, best to use 440, yes.
Thanks Maurice
My fanalab often lost my custom games. I added RBR manually, but after a few days, it will be gone. And I need to add it again which is very annoying.
Hi!
I have the same problem.
Any news about a fix for this bug?
.
i'm stuck with 1.61.3 version. I already upgraded to 1.62.3 and it was working for 1 or 2 months, but now I have a KernerBase.dll and a .NET error (game crach after splashcreen) with version 1.62 an 1.63. I'm forced to downgrade to 1.63.1
Why wont it let me open my steering wheel stuff to get to like the sho stuff?
and can you view other peoples profiles?
Most likely because you use an incompatible driver.
Which driver are you using?
Hi Maurice Böschen , first of all thanks for your great work
I just have a small issue with one of your ACC profil
i have everything up to date running on W10
DD2 and Podium Endurance Wheel
Every profiles work properly , i just have a problem with BMW M4 GT3 profil , the strenght is too high , only with this car, i use the correct in game settings, but i don't know why is too hard with this car only
Second question i see that all your profil are with formula V2 Wheel , any difference with Podium Endurance , if yes , how can i change it on Fanalab ?
Sorry for my English ,
Im having a problem in F1 2021 (PC) where all my led's that I set up in Fanalab work properly in Time Trial but when I go into my career or Gran prix when I leave my pit stall in practice and I get to the exit pit lane line I can not deactivate the pit limiter, I have no steering and my pit lane lights/ limiter stays on. Also no buttons work on the wheel and I have to use the keyboard to get into the menu. All that works is the gas and brake but the rumble on the brake pedal (clubsport v3) stays on when in the pits and leaving. When I close out Fanalab im able to leave the pits and everything works normal. The last time I played the game was December 2021 and January 2022 where everything worked fine so I am not sure if it was a Update with the game that they rolled out. If Fanatec needs anything on my end I'll be gladly to help to hopefully get this resolved. Have a great day.
Hardware: Csl elite + base, Fanatic F1 V2 wheel, Clubsport v3 pedals
Current Drivers: PC driver 439, Base 689, Motor 22, F1 Wheel 44, Pedal's 1.32 Fanalab 1.63
I also rolled back Drivers to last time it worked but this did not fix it: PC Driver 402, Base 684, Motor 22, F1 Wheel 40, Pedal's 1.31 Fanalab 1.60.2
is there a manual pdf for 1.63??
I found a Fanalab manual online dated 06/19, but so far nothing newer. I'm surprised that there isn't a manual in the Fanalab download zip file.
No, there isnt.