I have updated the FanaLab and Driver yesterday (2.1.28 and 456). Then I did firmware update and now my V2.5X is stuck in a firmware update loop. The sotware says version 47 is available and the current firmware installed would be "0". When I interrupt the update loop by exiting the process just before it starts again and wants me to confirm the installation, the wheel display shows version 47 as the installed one.
Yesterday I was testing Forza Motorsports with the default configuration of the steering wheel and removing the wheels option that makes the steering wheel vibrate in the menus, in the all default option the feeling of the steering wheel is perfect, much better than on PC with the configuration by default, but light years, if you ask me if I prefer to play with my Clubsport DD+ on PC or Xbox, without a doubt on Xbox the force feels very good, the only problem is that if you set that wheel option to 0, you lose a lot of strength, in sensations the order of priority in terms of better control is:
1 - Xbox series wheel option 1 or more (with the steering wheel vibration bug, what I do is turn off the wheel until the race starts or I change the option right at the start of the race, for online races it is not viable)
2 - PC with the wheel option at 100 by default, even so the wheels do not feel good grip on the asphalt, with each turn it seems that the car is skidding, in the video that I show you you will see that it is going away the car several times)
3 - Xbox series with the wheels option at 0 (the control is like playing without force practically, and you just go from setting the wheels option from 1 to 0, a little strange...)
Either it is a driver or game problem, but it is a problem that must have a solution, because the vibration in the menus is only with the Xbox with the default configuration.
Could someone try Forza Motorsport with Clubsport DD+ on an Xbox series and the default configuration to see if the same thing happens?
I put a video of the comparison of 2 races with option 1 and option 0.
The first race is the option 1, in which he came sixth with the difficulty at 5 and the second race with the option 0 he came 9, sliding the car continuously without being able to choose where to put the car to overtake etc., in this last option I'm 2 seconds slower per lap.
At the beginning of the video I do the first lap without force, option 0, and the second lap I do with force with option 1, then I do the races first with force and then without
In the movement of the steering wheel between 2 o'clock, you can clearly see that with force I am softer with the steering wheel.
By the way, without updating the firmware (I have the drivers and firmware from November 454) I had it on for 6 hours straight using it at full capacity and it didn't disconnect or do anything strange, the only complaint I have is with Forza Motorsport and the menus.
In F1 23 I did 2 hours in a row of races that were spectacular, the control is brutal in F1 23, the feeling of F1 on Xbox and PC is the same, I didn't notice any differences between the 2 platforms.
In F1 23 I tried going full throttle, stepping on the line on the right or left, rubbing against the grass and the walls, and it is spectacular how I manage to follow the line continuously. In that sense, I am very happy because I can invent overtaking in the races of the high control I have of the car now.
I leave you a sample of what I say about F1 23 in this fragment that I attach
The issue has nothing to do with the PS5. It disconnects on the pc as well after the 456 update. It has bugs. Just uninstall the 456 driver from your pc , install the 455 , restart the pc , plug your dd+ and do a manual firmware update in this order : Base , WQR , Wheel. And your problem is gone. With 456 on the PS5 and as well on PC after 15 minutes of racing it disconnects. With the 455 i raced several hours and everything was like a charm. So , do not update the 456 , but if you already did it, downgrade back to 455. Simple as that. May the Force(feedback) Be With You!
And it is still under investigation, like I said many times. Not much you can do for now.
There was huge progress on the issue though and a new try to fix the wheel communication freezes is currently in internal testing to be hopefully released in March to everyone.
I have the same wheelbase and also driver 456 installed but with a CSL Elite WRC wheel and i have the same problem, only mine says V4 firmware for the wheel is available and i can also not update it because of the firmware loop.. 1st ever problem with new driver unfortunately. I switch back to driver 455 until new driver is available in about 2 to 4 months i guess
This also happens with 455, but it doesn't feel like it happens as often. I'll wait for 457. Is bad, because I can't drive online currently until the bug is fixed.
it happens in forza motorsport and xbox with the clubsport dd+ on pc it doesn't happen, activating the option mentioned on the wheel, it seems more like a problem with the base, from something similar that I read that was fixed previously that happened in forza, that you fixed it
I am linking a YouTube video. I don't know if that is why it is not published or seen, but it is strange that no one had answered me before linking the video.
The shaking as seen in the video is very exaggerated, it is only in the menu, just as the dd+ came from the factory, there must be more people with this problem, I set everything to 0 in the steering wheel settings and I raised it and it happens Anyway, the only option that stops it is that of the game, on PC it is at 100 no problem, but the force feels much better on Xbox with this problem than on PC by default, it doesn't seem like a problem with the game
@YouTube-Letro82 : Yes, but the out-of-the-box firmware has other bugs that can only be fixed with 455 or 456. You cannot report an error in the 456 thread if you do not use this driver and firmware. :)
You're right, I'm sorry, well, as you said that with dd it doesn't happen to you at 456, I'll be calmer and maybe I'll update it or wait for 457 in March if it solves the disconnections, thank you very much and I'm sorry, but I didn't know what it could be something that was solved in these new versions, well if anyone else encounters the same thing they will read this thread, thank you very much!!
Comments
Dear all,
I have updated the FanaLab and Driver yesterday (2.1.28 and 456). Then I did firmware update and now my V2.5X is stuck in a firmware update loop. The sotware says version 47 is available and the current firmware installed would be "0". When I interrupt the update loop by exiting the process just before it starts again and wants me to confirm the installation, the wheel display shows version 47 as the installed one.
Wheel base CSL DD 8 N.m
Wheel ClubSport Formula V2.5 X
APM installed
Any idea what happens here?
Ignore that issue until new Driver release in future, known issue with the driver / FW you just updated to recently.
Good morning
Yesterday I was testing Forza Motorsports with the default configuration of the steering wheel and removing the wheels option that makes the steering wheel vibrate in the menus, in the all default option the feeling of the steering wheel is perfect, much better than on PC with the configuration by default, but light years, if you ask me if I prefer to play with my Clubsport DD+ on PC or Xbox, without a doubt on Xbox the force feels very good, the only problem is that if you set that wheel option to 0, you lose a lot of strength, in sensations the order of priority in terms of better control is:
1 - Xbox series wheel option 1 or more (with the steering wheel vibration bug, what I do is turn off the wheel until the race starts or I change the option right at the start of the race, for online races it is not viable)
2 - PC with the wheel option at 100 by default, even so the wheels do not feel good grip on the asphalt, with each turn it seems that the car is skidding, in the video that I show you you will see that it is going away the car several times)
3 - Xbox series with the wheels option at 0 (the control is like playing without force practically, and you just go from setting the wheels option from 1 to 0, a little strange...)
Either it is a driver or game problem, but it is a problem that must have a solution, because the vibration in the menus is only with the Xbox with the default configuration.
Could someone try Forza Motorsport with Clubsport DD+ on an Xbox series and the default configuration to see if the same thing happens?
I put a video of the comparison of 2 races with option 1 and option 0.
The first race is the option 1, in which he came sixth with the difficulty at 5 and the second race with the option 0 he came 9, sliding the car continuously without being able to choose where to put the car to overtake etc., in this last option I'm 2 seconds slower per lap.
At the beginning of the video I do the first lap without force, option 0, and the second lap I do with force with option 1, then I do the races first with force and then without
https://www.youtube.com/watch?v=RdCjrJOyY38
In the movement of the steering wheel between 2 o'clock, you can clearly see that with force I am softer with the steering wheel.
By the way, without updating the firmware (I have the drivers and firmware from November 454) I had it on for 6 hours straight using it at full capacity and it didn't disconnect or do anything strange, the only complaint I have is with Forza Motorsport and the menus.
In F1 23 I did 2 hours in a row of races that were spectacular, the control is brutal in F1 23, the feeling of F1 on Xbox and PC is the same, I didn't notice any differences between the 2 platforms.
In F1 23 I tried going full throttle, stepping on the line on the right or left, rubbing against the grass and the walls, and it is spectacular how I manage to follow the line continuously. In that sense, I am very happy because I can invent overtaking in the races of the high control I have of the car now.
I leave you a sample of what I say about F1 23 in this fragment that I attach
https://www.twitch.tv/videos/2075282349?t=00h26m21s
Thank you so much
Thank you for the quick reply!
I will do so, if this is the way. Have a nice day.
what can we do till Fanatec have a solution?
Unfortunately... Nothing.
The issue has nothing to do with the PS5. It disconnects on the pc as well after the 456 update. It has bugs. Just uninstall the 456 driver from your pc , install the 455 , restart the pc , plug your dd+ and do a manual firmware update in this order : Base , WQR , Wheel. And your problem is gone. With 456 on the PS5 and as well on PC after 15 minutes of racing it disconnects. With the 455 i raced several hours and everything was like a charm. So , do not update the 456 , but if you already did it, downgrade back to 455. Simple as that. May the Force(feedback) Be With You!
he tell it started happen before 456
thank you for your answers 🙂 but the disconnections were already there with the 455 driver..
They are there from the factory, yes.
And it is still under investigation, like I said many times. Not much you can do for now.
There was huge progress on the issue though and a new try to fix the wheel communication freezes is currently in internal testing to be hopefully released in March to everyone.
@Maurice Böschen Please, keep the recognizing of the F1 V2 Wheel with the new driver :) That works perfectly since 456.
I have the same wheelbase and also driver 456 installed but with a CSL Elite WRC wheel and i have the same problem, only mine says V4 firmware for the wheel is available and i can also not update it because of the firmware loop.. 1st ever problem with new driver unfortunately. I switch back to driver 455 until new driver is available in about 2 to 4 months i guess
Thanks for the positive news. In general, is it safe to downgrade firmware like the other user did? I wouldn’t do it now but I am interested to know.
Does anyone know anything about the tremors in the Forza Motorsport menu? Is it a known problem?
is it being worked on?
Thanks
This also happens with 455, but it doesn't feel like it happens as often. I'll wait for 457. Is bad, because I can't drive online currently until the bug is fixed.
What tremors?
Totally unknown. When happening just in one game then it's more likely a game issue
Didn't you see my post with the YouTube video where I show it? It's on page 4
it happens in forza motorsport and xbox with the clubsport dd+ on pc it doesn't happen, activating the option mentioned on the wheel, it seems more like a problem with the base, from something similar that I read that was fixed previously that happened in forza, that you fixed it
you have wrong FFB settings for forza motorsport. No problems here with my CS DD and Forza Motorsports 8 on PC. Seek for FFB Settings for FM.
Exactly with the csl dd it doesn't happen, only with the dd+, I don't know if it will also happen with the dd
https://youtu.be/qfs-sS-hEDI?si=FdBSFiyWqbNiTdzf
not CSL DD, I have CS DD and on Xbox and on PC no problems here.
On PC it doesn't happen only on Xbox, you can try it on Xbox, do you have it?
with the csl dd on xbox it doesn't happen either
I am linking a YouTube video. I don't know if that is why it is not published or seen, but it is strange that no one had answered me before linking the video.
The Xbox Series X belongs to my son. I tested it to check the driver error. However, I didn't notice any wheel tremors on my CS DD.
The shaking as seen in the video is very exaggerated, it is only in the menu, just as the dd+ came from the factory, there must be more people with this problem, I set everything to 0 in the steering wheel settings and I raised it and it happens Anyway, the only option that stops it is that of the game, on PC it is at 100 no problem, but the force feels much better on Xbox with this problem than on PC by default, it doesn't seem like a problem with the game
you said "just as the dd+ came from the factory". have you installed the firmware 456 for you CS DD+?
No, because then it will be disconnected, I understand, it will generate another problem, right?
@YouTube-Letro82 : Yes, but the out-of-the-box firmware has other bugs that can only be fixed with 455 or 456. You cannot report an error in the 456 thread if you do not use this driver and firmware. :)
You're right, I'm sorry, well, as you said that with dd it doesn't happen to you at 456, I'll be calmer and maybe I'll update it or wait for 457 in March if it solves the disconnections, thank you very much and I'm sorry, but I didn't know what it could be something that was solved in these new versions, well if anyone else encounters the same thing they will read this thread, thank you very much!!