PS detects PS button input, so game freezes and goes to home screen, i can instantly click on the game againg and play. No base reboot no wheel reboot. Seems like a verry smal and quick disconnect?
Can I get an idea the rareness of the CS DD(+) having issues with disconnects with firmware from 463 and 464? Has anyone had to get a replacement unit? Does support know if the is a serial number range where problems can occur hardware wise due to more data being pumped out for the Bentley wheel compatibility? Is there any rhyme or reason as to the units affected? And will I be able to downgrade directly back to 462 if I run into an issue? Thanks.
Hey my wheel automatic switches when playing on xbox from xbox mode ( green ) to pc mode (Orange) i already got a new wheel biccus they dit think it whas that but it still happens on all my wheels (wrc-fomula 2.5x ) will this maybe help? And i already checked if it whas the shaft and so on and nothing changed.
Do we have a update on when DD Extreme will have fixed LED and OLED freezing issue. On version 455 the wheel will randomly engage clutch but resolved after first press.
!!! IMPOSSIBLE TO INSTALL THE DRIVER(S) ON WNDOWS 11 !!!
Hi everyone, I experience an issue with the installation of the driver(s) (I tried 5 different versions) on Windows 11.
I downloaded the latest driver (also tried with older ones), unzipped it, cleared windows temp folders, but it keeps stopping in the middle of the installation – and these messages pop up:
I have tried since 3 days now, and I can't resolve this issue.
And I NEED to update and calibrate my new pedals, otherwise I can't drive anymore.
It has now happened four to six times that no input was possible via the Podium Button Module Endurance in the middle of the race and the shifter no longer worked. The problem occurs suddenly, without warning. Before that I had installed driver 455 for a long time and I didn't have these problems.
THX"
A week ago I had this issue two times in an hour, so I decided to downgrade the WQR to 1.0.0.3 (from the FW 455). Since than I had no problems any more!
Hi Howard, i have the clubsport DD+ with the disconnection problem with the new firmware 462/463 i play on ps5, i sent the base on Friday to the assistance, I hope they solve the problem!!
If you have issues with 463 or 464 (which there is nothing to even believe you could face issues when you dont have issues with 462) then of course you can always go back to 462.
DD+ 464 install went fine, no new issues yet w legacy, Formula v2 and PBME wheels. HB 1. 5 jittery signal smoothed out. So far so good after about 4 hrs use.
No control panel shortcut installed on desktop tho
Jetzt habe ich mir die ClubSport Universal Hub V2 gekauft
mit dem Podium Advanced Paddle Module,
die laut Beschreibung unterstützt werden soll
Aber das stimmt nicht zu 100%! Die oberen Schaltwippen werden im Treiber nicht abgestützt. Ich habe die Firmware 2 auf dem Universal Hub V2 installiert. Wann wird das Problem behoben? Andernfalls schicke ich den Universal Hub V2 zurück und möchte mein Geld zurück.
Es ist inakzeptabel, Menschen auf diese Weise abzuzocken.
Gegen Montagespuren kann ich nichts machen, wenn ich das vorher gewusst hätte, hätte ich es nie gekauft. Sorry, aber das ist ein No-Go
Kompatibel mit
Podium-Nabe
ClubSport Lenkrad F1® 2018
ClubSport Lenkrad F1® 2019
ClubSport Lenkrad F1® 2020
ClubSport Lenkrad F1® 2021
ClubSport Lenkrad Formel V2
ClubSport Lenkrad Formel V2.5 X
ClubSport Lenkrad Formel V2.5
ClubSport Lenkrad RS
ClubSport Lenkrad BMW GT2 V2
ClubSport Universal-Nabe V2
ClubSport Universal Hub V2 für Xbox
ClubSport Lenkrad Universal Hub für Xbox One - (einige Geräte können eine tote Zone auf den analogen Achsen haben. Der magnetische Schalthebel und die Hilfshebel sind davon nicht betroffen.)
Nicht kompatibel mit
ClubSport Lenkrad Formel Schwarz / Carbon
ClubSport Lenkrad F1® Esports
ClubSport Lenkrad BMW M3 GT2
ClubSport Lenkrad Universal Hub
ClubSport Lenkrad Porsche 918 RSR
CSL Lenkrad P1 für Xbox One
CSL Elite Lenkrad P1 für Xbox One
CSL Elite Lenkrad P1 für PS4™ (ab CSL Elite Racing Lenkrad)
I olso had the problem with the 463, i think you're safe from the problem, i followed Maurice's advice and i sent the base Friday to the assistance, i received now an email that my order has been processed, i think and hope they send me a new base!!! 😀 Thanks Fanatec
I also wrote that it has something to do with the firmware for the Clubsport Steering Wheel F1® PS5.
No problems with the Sreering Wheel: 0.3.5.0,
but with the Sreering Wheel: 1.0.2.0 the ffb crashes or restarts and pauses for 3 to 4 seconds until it gradually starts working again. I've tried this twice now and I'm sure that's what's causing it for me.
No problems with pauses with the ClubSport Universal Hub V2, but with the Podium Advanced Paddle Module.
Anyone else have this issue? Why aren't my settings being saved from Fanatec control panel. As soon as I power down my wheelbase all settings are lost.
Comments
Is this a know issue:
Clubsport DD+
formula V2.5 Redbull Ltd edition
ps5
F1 24
newly unboxed and update tot 464 today.
PS detects PS button input, so game freezes and goes to home screen, i can instantly click on the game againg and play. No base reboot no wheel reboot. Seems like a verry smal and quick disconnect?
Can I get an idea the rareness of the CS DD(+) having issues with disconnects with firmware from 463 and 464? Has anyone had to get a replacement unit? Does support know if the is a serial number range where problems can occur hardware wise due to more data being pumped out for the Bentley wheel compatibility? Is there any rhyme or reason as to the units affected? And will I be able to downgrade directly back to 462 if I run into an issue? Thanks.
"missed shifts and button inputs on the P DDs" seems to be fixed on my DD1 with driver 464 + firmware
Hey my wheel automatic switches when playing on xbox from xbox mode ( green ) to pc mode (Orange) i already got a new wheel biccus they dit think it whas that but it still happens on all my wheels (wrc-fomula 2.5x ) will this maybe help? And i already checked if it whas the shaft and so on and nothing changed.
Thnx for the help
And when will the new driver be out so we xbox user's can finally use all the button's,led's,...
Do we have a update on when DD Extreme will have fixed LED and OLED freezing issue. On version 455 the wheel will randomly engage clutch but resolved after first press.
Next year.
No ETA, but not this year.
!!! IMPOSSIBLE TO INSTALL THE DRIVER(S) ON WNDOWS 11 !!!
Hi everyone, I experience an issue with the installation of the driver(s) (I tried 5 different versions) on Windows 11.
I downloaded the latest driver (also tried with older ones), unzipped it, cleared windows temp folders, but it keeps stopping in the middle of the installation – and these messages pop up:
I have tried since 3 days now, and I can't resolve this issue.
And I NEED to update and calibrate my new pedals, otherwise I can't drive anymore.
Can someone help me?
Thanks in advance.
When will the new beta driver be released?
which version of W11 ? I'm still on 23H2 and installation went fine for me
This is my Post from FW 463:
"Hello!
Hardware: PS5, CS DD+, CS_UH_V2, P_BME, P_APM
I play only GT7
It has now happened four to six times that no input was possible via the Podium Button Module Endurance in the middle of the race and the shifter no longer worked. The problem occurs suddenly, without warning. Before that I had installed driver 455 for a long time and I didn't have these problems.
THX"
A week ago I had this issue two times in an hour, so I decided to downgrade the WQR to 1.0.0.3 (from the FW 455). Since than I had no problems any more!
I hope this helps @Maurice and @Marcel
Hi Howard, i have the clubsport DD+ with the disconnection problem with the new firmware 462/463 i play on ps5, i sent the base on Friday to the assistance, I hope they solve the problem!!
Maurice,
Can you give a quick comment on this? Much appreciated.
Thanks. I am fine on 462. Worried about 463+. If yours didn’t work on 462, it was definitely something wrong.
Does it allows install in developer mode?
If you have issues with 463 or 464 (which there is nothing to even believe you could face issues when you dont have issues with 462) then of course you can always go back to 462.
DD+ 464 install went fine, no new issues yet w legacy, Formula v2 and PBME wheels. HB 1. 5 jittery signal smoothed out. So far so good after about 4 hrs use.
No control panel shortcut installed on desktop tho
Hallo
Ich habe das ClubSport Racing Wheel F1 Set,
die 15 Nm ClubSport DD+ Radbasis.
Jetzt habe ich mir die ClubSport Universal Hub V2 gekauft
mit dem Podium Advanced Paddle Module,
die laut Beschreibung unterstützt werden soll
Aber das stimmt nicht zu 100%! Die oberen Schaltwippen werden im Treiber nicht abgestützt. Ich habe die Firmware 2 auf dem Universal Hub V2 installiert. Wann wird das Problem behoben? Andernfalls schicke ich den Universal Hub V2 zurück und möchte mein Geld zurück.
Es ist inakzeptabel, Menschen auf diese Weise abzuzocken.
Gegen Montagespuren kann ich nichts machen, wenn ich das vorher gewusst hätte, hätte ich es nie gekauft. Sorry, aber das ist ein No-Go
Kompatibel mit
Podium-Nabe
ClubSport Lenkrad F1® 2018
ClubSport Lenkrad F1® 2019
ClubSport Lenkrad F1® 2020
ClubSport Lenkrad F1® 2021
ClubSport Lenkrad Formel V2
ClubSport Lenkrad Formel V2.5 X
ClubSport Lenkrad Formel V2.5
ClubSport Lenkrad RS
ClubSport Lenkrad BMW GT2 V2
ClubSport Universal-Nabe V2
ClubSport Universal Hub V2 für Xbox
ClubSport Lenkrad Universal Hub für Xbox One - (einige Geräte können eine tote Zone auf den analogen Achsen haben. Der magnetische Schalthebel und die Hilfshebel sind davon nicht betroffen.)
Nicht kompatibel mit
ClubSport Lenkrad Formel Schwarz / Carbon
ClubSport Lenkrad F1® Esports
ClubSport Lenkrad BMW M3 GT2
ClubSport Lenkrad Universal Hub
ClubSport Lenkrad Porsche 918 RSR
CSL Lenkrad P1 für Xbox One
CSL Elite Lenkrad P1 für Xbox One
CSL Elite Lenkrad P1 für PS4™ (ab CSL Elite Racing Lenkrad)
CSL Elite Lenkrad McLaren GT3
Please post in English according to the forum rules.
The webshop description in general is correct, the Hub is compatible with the Base.
It is "just" a known Firmware issue, that the upper APM paddles mounted to a CS UH V2 currently do not work on the CS DD.
This will be fixed at some point in the future - no ETA yet, most likely next year.
I wrote in English,
I have no idea why it was translated into German.
That's not a very promising statement!
Thank you.
Hi! 24H2… I didn't speak about the fact that I installed Windows on my MacBook Pro… could this also be a reason?
I already installed Windows 10 + older Fanatec Drivers on my ancient MacBook Pro, and everything went well.
Unfortunately it doesn't.
I believe I experienced same when I did not first uninstall the old driver. I always remove old first now.
I olso had the problem with the 463, i think you're safe from the problem, i followed Maurice's advice and i sent the base Friday to the assistance, i received now an email that my order has been processed, i think and hope they send me a new base!!! 😀 Thanks Fanatec
I have the Clubsport Racing Wheel F1 Set,
the 15 Nm ClubSport DD+ wheel base.
I also wrote that it has something to do with the firmware for the Clubsport Steering Wheel F1® PS5.
No problems with the Sreering Wheel: 0.3.5.0,
but with the Sreering Wheel: 1.0.2.0 the ffb crashes or restarts and pauses for 3 to 4 seconds until it gradually starts working again. I've tried this twice now and I'm sure that's what's causing it for me.
No problems with pauses with the ClubSport Universal Hub V2, but with the Podium Advanced Paddle Module.
Maybe it will help someone.
I changed my computer since the last time I used Fanatic Drivers… the new one has no Driver installed. But thanks for the advice.
Anyone else have this issue? Why aren't my settings being saved from Fanatec control panel. As soon as I power down my wheelbase all settings are lost.
Using GT DD Pro/CSL Elite V2
I am on all the latest drivers and firmware.
Good