in your recommend settings for the gt dd pro 8nm, you recomend to Set FF max torque to 5. ca I assume That I have the full 8nm in Peak with that Setting?
I know there aren't any official GT7 settings for the DD+ recommended but what would people suggest as a starting point for wheel settings and in game settings?
NDP 10-14 - too much will dull the feeling, too little get oscilation
NFR 15-18 some friction for a more real feeling
NIN 4-10 some weight for a more real feeling
INT 7-10 - too low its noisy, not adding information. Too high is smoothing out the detail
FEI 90
FOR 90
SPR 100 - not used in GT7
DPR 100 - not used in GT7
BLI 80 - ABS Vib setting for CSP V3 - not a game feature
BRF 73 - Force level for CSPV3
in game torque 3, no higher than 5 it clips
sensitivity 7 - this is the speed the game reacts to sudden inputs, very subtle, so higher a quick input gives a quick response. lower a less quick reponse. Won’t notice with gradual turning of the wheel
That was no change and is no issue. You are just in the Standard Tuning Menu with limited settings and ranges. This was shown to you in a popup during the update process which you could not skip for 10 seconds. Apparently you did not read that popup. It would have explained to you how to get back into the Advanced Tuning Menu with all the settings and ranges by pressing and Holding the Tuning Menu Button for 3 seconds while being in the Tuning Menu.
When I play PS5 GT7 using the Podlum steering wheel Monte Carlo Rally on Gran Turlsmo DD Extreme, the arrow/cursor in the game moves on its own and I can't play. I can play with other Fanatec steering wheels without any problems.
I can play Monte Carlo Rally without any problems with the CSL DD (8Nm).
Is this malfunction a problem with the game software?
Is there anything new after the update? FFB feels very weak after the update with the same settings. Has anyone tried the auto settings? According to the patch notes, that should work now too.
Comments
No.
Any ETA on this?
FFS is still PERK on DD+?
Hello Maurice,
in your recommend settings for the gt dd pro 8nm, you recomend to Set FF max torque to 5. ca I assume That I have the full 8nm in Peak with that Setting?
Is there no official setting for GT DD EXTREME yet?
No.
@Maurice
I know that things are crazy at Fanatec right now, but any idea when there might be?
Hi Guys,
What are now the best settings for GT DD pro 8nm with the formula f1 wheel?
Many Thanks in advance !!
Hi Guys,
What are now the best settings for GT DD pro 8nm with the formula f1 wheel?
Many Thanks in advance !!
I know there aren't any official GT7 settings for the DD+ recommended but what would people suggest as a starting point for wheel settings and in game settings?
Thanks - Nick
Hi Nick, I just got the steering wheel. I tested these settings.
Wheel :
On GT7 :
Paramètres > Paramètres de manette > Retour de force :
Meryll
my DD+ GT 7 settings - ranges are to taste
FFB 80-90
NDP 10-14 - too much will dull the feeling, too little get oscilation
NFR 15-18 some friction for a more real feeling
NIN 4-10 some weight for a more real feeling
INT 7-10 - too low its noisy, not adding information. Too high is smoothing out the detail
FEI 90
FOR 90
SPR 100 - not used in GT7
DPR 100 - not used in GT7
BLI 80 - ABS Vib setting for CSP V3 - not a game feature
BRF 73 - Force level for CSPV3
in game torque 3, no higher than 5 it clips
sensitivity 7 - this is the speed the game reacts to sudden inputs, very subtle, so higher a quick input gives a quick response. lower a less quick reponse. Won’t notice with gradual turning of the wheel
My recent firmware update removed NDP, NFR, NIN and INT from my Podium F1 wheel settings. Is this intentional?
That was no change and is no issue. You are just in the Standard Tuning Menu with limited settings and ranges. This was shown to you in a popup during the update process which you could not skip for 10 seconds. Apparently you did not read that popup. It would have explained to you how to get back into the Advanced Tuning Menu with all the settings and ranges by pressing and Holding the Tuning Menu Button for 3 seconds while being in the Tuning Menu.
グラントゥルスモDDエクストリームでポドラムのステアリングホイールモンテカルロラリーを使用してPS5 GT7をプレイすると、ゲーム内の矢印/カーソルが勝手に動いてプレイできません。他のFanatecのステアリングホイールでも問題なく遊べます。
モンテカルロラリーはCSL DD(8Nm)で問題なくプレイできます。
この誤動作はゲームソフトウェアの問題ですか?
同じ症状を経験している人はいますか?
When I play PS5 GT7 using the Podlum steering wheel Monte Carlo Rally on Gran Turlsmo DD Extreme, the arrow/cursor in the game moves on its own and I can't play. I can play with other Fanatec steering wheels without any problems.
I can play Monte Carlo Rally without any problems with the CSL DD (8Nm).
Is this malfunction a problem with the game software?
Is anyone else experiencing the same symptoms?
That's a known Firmware issue to be fixed at some point in the future.
Is there anything new after the update? FFB feels very weak after the update with the same settings. Has anyone tried the auto settings? According to the patch notes, that should work now too.
I have the same weak feeling with the update. DDPro with boost kit. It’s pretty bad.
I tried Auto with no change. Maybe the in game settings from 5 and 1 to something else will net better results.
Right now I don’t see any YouTubers saying anything but they are all on the extreme base.
DD Pro 8nm in Auto S 6-1 in game, feel really great, not sure if help but I’m on driver 457.
I'll try driver 457. I'm currently on 455. Thanks for the advice
That is a beta firmware. FYI
Hey Maurice,
i know, you doent Like gt7, but would you do us a favor and test the new FBB with 1.49 and make a recommendation for new base Settings please?
I would also be very happy to receive a set-up recommendation for the podium base
+1 here for this too. Maurice set up recommendation a few years back before the ffb nerf was the best setup i ever had.
+1 here....settings in game and for the base podium........Maurice ...help ussss..please
I cant help you as I dont drive this game anymore.
And you wouldn't start the game again for us and take a look at the FBB? ;-)
Nope, not after all the comments I have read that the FFB is worse than ever before.
I am done with this game.
I've also heard a lot of people say that you can feel more details now, but the in-game settings had to be turned up from 5 to 8.
Is it possible that you can now use the full range of 1-10 without clipping? Something has changed in the algorithm.