That's normal for now until they are also implemented into the new UI. Until then you need to access the old UI through the USB Gamecontroller overview of windows like before
do you know when we can increase the FBB up to 200% for the CSL DD or do you have any information from the developers at ACC if they are fixing the FFB issues for Xbox?
come on seriously... how long has the BMW GT2 wheel been around and u basically screw it with the DD2 (your flagship product) by neutering it with only low Torque...
you should really hang your heads in shame Fanatec
It's not just the BMW. It can affect every wheel. But as Marcel explained the root cause is still unknown because only a limited number of people are affected by the issue and Fanatec can't reproduce the problem at all in their office so a potential fix could still take some time but they are doing their best to fix it asap of course.
Hello there!!. checked in compPS4 mode and it doesn't work either. The direction indicator is still on all the time and with the left analog paddle you can put one or the other. but never turn it off. I have also detected that when I change the game on PC. It does not automatically detect the profile that I have by default. I have to apply it manually and accept a message that comes out saying that the base is not correct. I accept it and it loads my profile. And then something that I have also noticed (and less important) is that before if I turned on the ps4 and then the steering wheel detected the ps4. and the same with the PC. now the base detects the last thing you use. Thank you very much and I hope it helps with something. greetings
Hello again!. For if it helps, I just installed v402 and fanalab v1.54.5 without degrading base or steering wheel or anything. and now everything reconnects automatically. the only problem that persists is the fixed turn signals in GTS. Thank you. Cheers
OK will do. Yes I updated everything to the latest firmware and using the latest FanaLab.
Any clue about the seq auto-mapping to the podium paddles after a reboot? Should I go back to the previous firmware on that as well? Its not that big a deal to simply load up the new driver software and toggle it, so might not be worth flashing again, but figured id ask. It was never a problem before this, but tbh I only JUST started using it and my ebrake 3 weeks ago when I gave Rallycross and Trophy Trucks a go on iRacing for the first time.
(**OMG IM HOOKED> TROPHY TRUCKS ARE THEEEE HIDDEN iRACING GEM NO ONE SEEMS TO EVER MENTION!)
Comp V2.5 doesn't work at all. Computer will simply not register it's existence. ACC seems to not recognise my DD2 binds even if I'm in DD2 mode. And when I go to rebind, it registers them all as "DD2 2" binds.
I've tried to uninstall and reinstall the driver. Now it's even worse. My DD2 isn't recognised at all.
Tried a different port. Same problem. Devices will recognise it as a DD2, but the fanatec software doesn't open. And if I unplug/replug the device, it comes up as a clubsport base.
english please. Which wheelbase do you have? currently only CSL DD and Podium DD are supported with the new UI, if you have any other wheelbase you still need to use the old driver via the game controller settings of windows.
Hello everyone. I can't install the driver update for my DD2 and my Formula V2. I always get the error message. The power switch is always flashing. Many thanks for your help
Ever since i updated to the latest drivers, any time i start up my DD2, it remembers that i set Tuning Profile 2 and I always have to switch it to Profile 1. Is there a way to save it so that it always starts with my 1st profile in the driver? I dont use fanalab.
Does anyone know why the drivers open up on the same profile and won't change to the last one used, when restarting the wheel? DD2 here. @Maurice Böschen or @Marcel Pfister
Comments
That's normal for now until they are also implemented into the new UI. Until then you need to access the old UI through the USB Gamecontroller overview of windows like before
I said before that we will take a look
We are indeed looking into improving that as also with the CSL DD some EMI related issues were happening
That's what I did, the pedals are not detected anymore there either when you simply connect them via USB.
They were detected with the older driver I used, I updated them once that way.
Any tests / info we could provide to help you on this ?
Hello,
do you know when we can increase the FBB up to 200% for the CSL DD or do you have any information from the developers at ACC if they are fixing the FFB issues for Xbox?
Would love to try my CSL DD on ACC.
Best Regards
come on seriously... how long has the BMW GT2 wheel been around and u basically screw it with the DD2 (your flagship product) by neutering it with only low Torque...
you should really hang your heads in shame Fanatec
Tested a bit further with an old laptop and there it worked as you describe Marcel. Updated pedals to v1.32 now.
I think I will have to try another USB port on my main PC, I remember having something like that a few years ago.
Could you remind me what USB ports are preferred? 2.0, 3.0 or 3.1?
Also, who can I contact regarding some problems with the forum?
I used to contact Remco for that but he doesn’t sepond, maybe he’s not an admin here amymore.
It's not just the BMW. It can affect every wheel. But as Marcel explained the root cause is still unknown because only a limited number of people are affected by the issue and Fanatec can't reproduce the problem at all in their office so a potential fix could still take some time but they are doing their best to fix it asap of course.
Hello there!!. checked in compPS4 mode and it doesn't work either. The direction indicator is still on all the time and with the left analog paddle you can put one or the other. but never turn it off. I have also detected that when I change the game on PC. It does not automatically detect the profile that I have by default. I have to apply it manually and accept a message that comes out saying that the base is not correct. I accept it and it loads my profile. And then something that I have also noticed (and less important) is that before if I turned on the ps4 and then the steering wheel detected the ps4. and the same with the PC. now the base detects the last thing you use. Thank you very much and I hope it helps with something. greetings
DD1 PS4
V3
F1 v2 PS4
Porsche GT3
Hello again!. For if it helps, I just installed v402 and fanalab v1.54.5 without degrading base or steering wheel or anything. and now everything reconnects automatically. the only problem that persists is the fixed turn signals in GTS. Thank you. Cheers
Thanks Marcel for the update.. I hope this is not Fanatecs way of phasing out old products.. 😛😁
OK will do. Yes I updated everything to the latest firmware and using the latest FanaLab.
Any clue about the seq auto-mapping to the podium paddles after a reboot? Should I go back to the previous firmware on that as well? Its not that big a deal to simply load up the new driver software and toggle it, so might not be worth flashing again, but figured id ask. It was never a problem before this, but tbh I only JUST started using it and my ebrake 3 weeks ago when I gave Rallycross and Trophy Trucks a go on iRacing for the first time.
(**OMG IM HOOKED> TROPHY TRUCKS ARE THEEEE HIDDEN iRACING GEM NO ONE SEEMS TO EVER MENTION!)
Thanks again!
Hi,
Upgrading from 402 to 415 has broken my DD2.
Comp V2.5 doesn't work at all. Computer will simply not register it's existence. ACC seems to not recognise my DD2 binds even if I'm in DD2 mode. And when I go to rebind, it registers them all as "DD2 2" binds.
I've tried to uninstall and reinstall the driver. Now it's even worse. My DD2 isn't recognised at all.
And now after a fresh uninstall and reinstall, it thinks my DD2 is a ClubSport WheelBase and Comp mode still doesn't work.
Absolute shitshow.
Try a different usb Port.
Tried a different port. Same problem. Devices will recognise it as a DD2, but the fanatec software doesn't open. And if I unplug/replug the device, it comes up as a clubsport base.
Hallo, hab seit dem neuen Update keine möglichkeit mehr fanatec control panel zu öffnen.
Jemand eine Idee?
english please. Which wheelbase do you have? currently only CSL DD and Podium DD are supported with the new UI, if you have any other wheelbase you still need to use the old driver via the game controller settings of windows.
Can confirm I'm also still having this issue of low torque with the GT2 wheel. Would submitting logs bey of any use?
SO i dont know why but fanalab and the fanatec control panel do nit detect my wheelbase or wheel can someone help me ?
Hello everyone. I can't install the driver update for my DD2 and my Formula V2. I always get the error message. The power switch is always flashing. Many thanks for your help
Regarding the turn signal issue I believe it is within the DD1 base firmware after testing a few firmware combinations.
I have downgraded to v402 again and everything works perfect again. so for now I'll stay like this
Ever since i updated to the latest drivers, any time i start up my DD2, it remembers that i set Tuning Profile 2 and I always have to switch it to Profile 1. Is there a way to save it so that it always starts with my 1st profile in the driver? I dont use fanalab.
Problem solved. The driver was broken.
After the repair from the FANATEC HP, the update worked.
Does anyone know why the drivers open up on the same profile and won't change to the last one used, when restarting the wheel? DD2 here. @Maurice Böschen or @Marcel Pfister
BMW GT2 wheel same problem as other low torque only
I have no problem with this, if I turn on the DD1 with profile 5 and restart it, profile 5 is still active
Driver 415 with a DD2, firmware for the mclaren gt3 will not update