Is it possible to change the ffb of all cars at the same time? or do I have to do everything one by one?
which pedals do you use? I have the v3, is that also included in the settings or do I have to set the rumble motor myself? this is the same with the wheel, the v2.5x.
I think someone made a script for that a while ago but dont remember who and when.
You can see the devices (Base, Wheel and Pedals) which I saved the profile with in the Game Profile Preview. All profiles are saved with DD2, either Formula v2 or P Hub + BME, and CSP v3.
Having isseus with the rev lights. When I start revving the wheel led lights are correct for a second then incorrect then correct again and so it goes, its like its jumping between two different LED settings.
I just installed this version instead of the latest public version and configured car profiles for the first time using Maurices profiles and re-saved so only led and vibration are loaded.
When starting a session in IRacing Fanalab automatically detectes and loads the correct profile.
That is because you did not disabled the native LED support so they are interfering with the FanaLab LEDs.
For EVERY game you need to click the two green buttons in the game profile Tab in Fanalab to Enable Telemetry and Enable Fanalab support to disable native game support.
Do that, follow the instructions shown to you in the pop-ups (it will tell you that you need to disable the shift option in the iRacing settings), and then everything will work correct :)
Hi, I've got strange issue, tried to search for similar one but with no luck. So I've just switched from Windows 10 to 11 and Carlist files are marked as read-only. When I unmark them and add cars I can save them, but with new restart of Fanalab app, files are being overwritten with default cars and marked as read-only again. Have anyone faced similar issue and knows the solution?
You are not supposed to edit the CarsList files! Therefore they are protected with read-only protection and get reset when you change something in there on the next FanaLab restart. Thats intended.
You must only change something in the CarsList_Custom files, those are not write protected and are the only files where a customer is allowed to make changes.
For edits on the official CarsList you have to wait for new FanaLab updates which add new official cars to that official list.
Oil Temp is not supported in ACC as you can see in the official Fanalab Telemetry Support List PDF file which is included with every download.
F1 23 should work also for EA Launcher. If it's not then your Windows Firewall is blocking the telemetry access. At least that's what our Dev thinks as it's working perfectly fine for him and he has otherwise no idea why it's not working for you as you are the only one in the world where it's not working currently so must be something on your PC...
Fixed rev limiter vibration for the steering wheel sometimes staying active after once getting triggered.
Fixed an issue with car dependent profile loading where sometimes a profile was not loaded.
Fixed an issue which lead to a FanaLab crash when the base is powered-off.
Improved the Telemetry data for Yellow Flags in ACC to react to yellow flags in sectors instead of just for FCY.
Added Max Torque Output for DD Bases to the Tuning Menu page where the current maximum torque in Nm depending on the FFB strength settings set in the Tuning Menu is now shown. On the Podium DD it's also dependent on the connected wheel and the torque key. On the CSL & GT DD Pro it's also dependent on the used Power Supply (Boost Kit).
Added flashing feature to the Pitlane and Pit Limiter RevLEDs to let them flash / blink in an adjustable Interval.
Added new CSL Universal Hub V2 picture to the alternative image selection flyout.
Added new CarsList for F1 23 to fix some CDALP loading issue for the F1 MyTeam and F1 World car in specific game modes.
Added new CarsList for iRacing (new: Acura ARX-06 GTP, Ferrari 296 GT3, NASCAR Legends Pontiac Grand Prix - 1987, Porsche 963 GTP, Super Formula SF23 - Toyota, Super Formula SF23 - Honda).
Changed mouse-over highlight effect of sliders and display priorities to yellow.
Comments
Doesnt matter. Will be changed in both. You can also change it directly on the wheels Tuning Menu...
But again, SEN 360 is completely wrong for iRacing.
Hello maurice,
first of all, thank you for this great ffb.
I use a dd1, 2.5x, v3. (my first fanatec stuff)
Is it possible to change the ffb of all cars at the same time? or do I have to do everything one by one?
which pedals do you use? I have the v3, is that also included in the settings or do I have to set the rumble motor myself? this is the same with the wheel, the v2.5x.
You would need to change it for every profile.
I think someone made a script for that a while ago but dont remember who and when.
You can see the devices (Base, Wheel and Pedals) which I saved the profile with in the Game Profile Preview. All profiles are saved with DD2, either Formula v2 or P Hub + BME, and CSP v3.
thanks! :D
Hi, is there a way tp get some Telemetry from American Truck Simulator and Euro Truck Simulator 2 ? I don't see the game listed in Fanalab.
No.
Having isseus with the rev lights. When I start revving the wheel led lights are correct for a second then incorrect then correct again and so it goes, its like its jumping between two different LED settings.
I just installed this version instead of the latest public version and configured car profiles for the first time using Maurices profiles and re-saved so only led and vibration are loaded.
When starting a session in IRacing Fanalab automatically detectes and loads the correct profile.
Any idea what could be wrong?
That is because you did not disabled the native LED support so they are interfering with the FanaLab LEDs.
For EVERY game you need to click the two green buttons in the game profile Tab in Fanalab to Enable Telemetry and Enable Fanalab support to disable native game support.
Do that, follow the instructions shown to you in the pop-ups (it will tell you that you need to disable the shift option in the iRacing settings), and then everything will work correct :)
@Maurice Böschen Your are the best! You too Fanatec :) I'm gonna go enjoy endless hours with my new Porsche 911 with perfect LEDs :D
Hi, I've got strange issue, tried to search for similar one but with no luck. So I've just switched from Windows 10 to 11 and Carlist files are marked as read-only. When I unmark them and add cars I can save them, but with new restart of Fanalab app, files are being overwritten with default cars and marked as read-only again. Have anyone faced similar issue and knows the solution?
FYI, I've had this happen a few more times since my earlier note - let me know if any additional information would be helpful!
Thats actually no issue at all.
You are not supposed to edit the CarsList files! Therefore they are protected with read-only protection and get reset when you change something in there on the next FanaLab restart. Thats intended.
You must only change something in the CarsList_Custom files, those are not write protected and are the only files where a customer is allowed to make changes.
For edits on the official CarsList you have to wait for new FanaLab updates which add new official cars to that official list.
F1 23 doesn´t work for me. Maybe because it´s the game pass version.
Another question: is the oil temperature in ACC simulated? The ITM display alwas shows 0.00. Is this normal?
THX
Oil Temp is not supported in ACC as you can see in the official Fanalab Telemetry Support List PDF file which is included with every download.
F1 23 should work also for EA Launcher. If it's not then your Windows Firewall is blocking the telemetry access. At least that's what our Dev thinks as it's working perfectly fine for him and he has otherwise no idea why it's not working for you as you are the only one in the world where it's not working currently so must be something on your PC...
Are there anySettings for CSL-DD 8Nm in Rennsport? I think the FFB feels very Strange. I know its a Beta but maybe aanyone has propper setting for me.
Thanks, Thomas
Rennsport is not supported by FanaLab atm and this thread is about FanaLab, not about settings ;)
Speaking of, I know you said the update would come this month, any ETA on that? Month is almost over :)
The month still has 7 days :)
An RC Build is ready and when no big issue is found then I am confident it should be released next week ;)
Great! Looking foward to the new update, but mostly your new profiles :^)
Ok thx
Are there any profiles for the CSL DD 8nm?
I loaded all available profiles - it felt strange first and then I realized that it's for DD2 - due to the calcs for DD1 in the read me...
I set the FFB strengh to 100% now but it still feels kind of overdampened.
The iR ingame settings I also adopted again (8nm and auto calc)
Any advice?
CSLDD+Boost
Clubsport Steering Wheel F1 (blue one)
No, my profiles are only for Podium DD.
I use Notepad++ (It's free).
You can make global edits across multiple open files.
Open all the .pws files, search and replace the line starting with <FF>.
Quick and easy.
Thanks Maurice, it was the setting within iRacing I missed.
Ejem ejem.... 😁
There are still some hours left until the weekend starts, so before we slip from September into October then....... ;)
2.00.06 release candidate available
Changes since 1.99.05
;)
"Added flashing feature to the Pitlane and Pit Limiter RevLEDs to let them flash / blink in an adjustable Interval."
Does this also work for the M4 wheel?
No, it's only for RevLEDs and FlagLEDs for now, not for Button LEDs yet.