This is known, see first post. MPS Pulse mode is currently broken in this firmware.
As long as you dont have a BMR its best do go back to 451 and downgrade the firmware again by opening the Firmware Manager, Tick the manual update checkbox, click on Manual Wheel Base Update, click Update, until the issue will be fixed in an upcoming new release. The driver needed to be released in this bad state due to the BMR release and we are very sorry for that and are also not happy about this release.
Buenas tardes. tengo un problema con mis dos bases fanatec csl elite. Solo tengo un aro y el otro día cambien una base por otra. Al acoplar el aro que es el v1 de play4 me hizo actualizar los controladores y ahora hay opciones que no me salen y además no puedo configurar los cinco perfiles que antes si podía. Os dejo una captura de la opción que desde que cambie de base no me sale. Un saludo y gracias de antemano
Hello Maurice, thank you so much for the fast answer. I donwgraded to 451 and to base frmware 3.0.1.4 and erverything is OK again. I do not want to criticize Fanatec furthrtmore, but please make more detailed informations about new issues with new driver. I cannot understand to release a driver with brocken MPS and not to point that it is recommended to install the driver only for the BMR. By the way, it would be usefull not to use allways shortcuts like BMR, MPS etc. but to write the whole name. I know for you it is clear for you, but I have allways to guess what is meant. Once more again, thank you for your support !
It does seem illogical but you get used to that with Fanatec. If a new driver for the Rally Module was needed in a hurry it only needed to include the relevant firmware. There was absolutely no need to include known faulty firmwares for other products and even less reason to pretend that this was a release candidate - it clearly wasn't as it contains known issues that need fixed before general release can be considered. This really needs to improve.
Good afternoon. I have a problem with my two fanatec csl elite bases. I only have one earring and the other day they exchanged one base for another. When attaching the ring, which is v1 of play4, it made me update the drivers and now there are options that I don't have and I also can't configure the five profiles that I could before. I leave you a screenshot of the option that has not worked since I changed my base. A greeting and thanks in advance.
Sorry for not having written in English from the beginning. It will not happen again
Well, the issues with the MPS and pulsing buttons are directly related to the implementation of the BMR and there was no time anymore to fix them in time. That's why these issues are in now as it was no option to delay the BMR.
I agree that this needs to improve. As said, we are also not happy and hope the next release will be much better.
Sorry Maurice, but the driver 452 is still the of official last released driver on the Fanatec Hompage ! Do you want that all the people will have the some problems as me ? The 452 driver must not be released for the community. It is only for BMR owner and the release date for BMR is 20.11.2023 !
I just received my DD1 wheel base back from a repair for motor disconnection. It appears to be a new wheel base they sent back. I went through the update process in the updated and then to 451. Things seemed to work normally. I then updated to 452. The update for the wheelbase installed but the QR update gets stuck in the “please wait” screen. I have to use the task manager to shut it down. The wheel base still works though, just not updated with the QR. next I try to set up shifters on my M4 wheel in iracing and it shows button 75 in setup screen and will not recognize the shifters. It says conflicting controls. I have other cars set up with the wheel so it is only on new setups for some reason. I tried to downgrade through the control panel but it will not. I tried installing 451 through the file but says newer version installed and won’t let it install. Windows 11 pro
Which MPS mode did you used? I guess Pulse Mode as that one indeed reports button 75 all the time in the latest firmware, will be fixed with the next firmware.
I updated to the new 452 and the shifter paddles on my McLaren GT3 v2 stopped working. Uninstalled the driver and rolled back the firmware to 451 and they still don't work. They worked flawlessly in games/sims previously. The strange thing is they show as working in the Fanatec Control Panel.
I have installed the 452 driver in all games I have no ptoblems exept in f1 23 pc. The ffb is gone When I play. I can steer and everything works well but no ffb. There are a lot of problems with that. How can I fix it. Is it Fanatec driver problem or the game his problem
Comments
This is known, see first post. MPS Pulse mode is currently broken in this firmware.
As long as you dont have a BMR its best do go back to 451 and downgrade the firmware again by opening the Firmware Manager, Tick the manual update checkbox, click on Manual Wheel Base Update, click Update, until the issue will be fixed in an upcoming new release. The driver needed to be released in this bad state due to the BMR release and we are very sorry for that and are also not happy about this release.
Buenas tardes. tengo un problema con mis dos bases fanatec csl elite. Solo tengo un aro y el otro día cambien una base por otra. Al acoplar el aro que es el v1 de play4 me hizo actualizar los controladores y ahora hay opciones que no me salen y además no puedo configurar los cinco perfiles que antes si podía. Os dejo una captura de la opción que desde que cambie de base no me sale. Un saludo y gracias de antemano
Hello Maurice,
to be sure to make no mistakes at the downgrading.
?? Is this the way? I don‘t want a heart attack this evening in cause of a wrong downgrading.😉
Many regards.
You only need to downgrade the Base Firmware.
Motor Firmware didn't changed and Steering wheel Firmware is unrelated to that issue as Rhe issue is within the Base FW.
Please post in English according to the forum rules so everyone understands your issue and can help you.
Hello Maurice, thank you so much for the fast answer. I donwgraded to 451 and to base frmware 3.0.1.4 and erverything is OK again. I do not want to criticize Fanatec furthrtmore, but please make more detailed informations about new issues with new driver. I cannot understand to release a driver with brocken MPS and not to point that it is recommended to install the driver only for the BMR. By the way, it would be usefull not to use allways shortcuts like BMR, MPS etc. but to write the whole name. I know for you it is clear for you, but I have allways to guess what is meant. Once more again, thank you for your support !
It does seem illogical but you get used to that with Fanatec. If a new driver for the Rally Module was needed in a hurry it only needed to include the relevant firmware. There was absolutely no need to include known faulty firmwares for other products and even less reason to pretend that this was a release candidate - it clearly wasn't as it contains known issues that need fixed before general release can be considered. This really needs to improve.
👍 Thank you and many regards
Good afternoon. I have a problem with my two fanatec csl elite bases. I only have one earring and the other day they exchanged one base for another. When attaching the ring, which is v1 of play4, it made me update the drivers and now there are options that I don't have and I also can't configure the five profiles that I could before. I leave you a screenshot of the option that has not worked since I changed my base. A greeting and thanks in advance.
Well, the issues with the MPS and pulsing buttons are directly related to the implementation of the BMR and there was no time anymore to fix them in time. That's why these issues are in now as it was no option to delay the BMR.
I agree that this needs to improve. As said, we are also not happy and hope the next release will be much better.
Exactly the same thing happens to me and it is because of the drivers , if you put the old drivers it no longer lashes.
Sorry Maurice, but the driver 452 is still the of official last released driver on the Fanatec Hompage ! Do you want that all the people will have the some problems as me ? The 452 driver must not be released for the community. It is only for BMR owner and the release date for BMR is 20.11.2023 !
The initial release of the BMR was the 27th October with some units being available immediately. And it needed an official release.
As said, we are also not happy and hope the next release will be much better.
You must take the driver 452 from the homepage ! It is only for BMR user.
I downgraded my driver to 451 this evening and reverted the base firmware to 3.0.1.4
The WQR firmware was upgraded to v7 in the 352 drivers. Should we also put back the old firmware because I don't see a button allowing this operation?
Thanks in advance.
No. Only downgrade the base firmware.
Thank you Maurice. Everything is working fine ;)
Just a heads-up: the new Mobile App update was released a few days ago on the Google Play Store and Apple App Store.
I just received my DD1 wheel base back from a repair for motor disconnection. It appears to be a new wheel base they sent back. I went through the update process in the updated and then to 451. Things seemed to work normally. I then updated to 452. The update for the wheelbase installed but the QR update gets stuck in the “please wait” screen. I have to use the task manager to shut it down. The wheel base still works though, just not updated with the QR. next I try to set up shifters on my M4 wheel in iracing and it shows button 75 in setup screen and will not recognize the shifters. It says conflicting controls. I have other cars set up with the wheel so it is only on new setups for some reason. I tried to downgrade through the control panel but it will not. I tried installing 451 through the file but says newer version installed and won’t let it install. Windows 11 pro
For 451 install you first need to uninstall 452 as you cant install an older version over a newer one.
Ok. I will try uninstall through file. Any ideas on iracing button conflict?
FYI, button assigning issue is gone on iracing after going back to 451
Which MPS mode did you used? I guess Pulse Mode as that one indeed reports button 75 all the time in the latest firmware, will be fixed with the next firmware.
What does BMR mean? Can someone explain all the abbreviations to me?
Button Module Rally.
I updated to the new 452 and the shifter paddles on my McLaren GT3 v2 stopped working. Uninstalled the driver and rolled back the firmware to 451 and they still don't work. They worked flawlessly in games/sims previously. The strange thing is they show as working in the Fanatec Control Panel.
Forgot to mention this problem is XBox Series X related. Any ideas?
Sorted after much headscratching.
Sharing your solution might help others having a similar problem.
I have installed the 452 driver in all games I have no ptoblems exept in f1 23 pc. The ffb is gone When I play. I can steer and everything works well but no ffb. There are a lot of problems with that. How can I fix it. Is it Fanatec driver problem or the game his problem
please help.