As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
okok sorry, I have installed all drivers 451 and fanalab 2.06 but the application crashes at the start, I can't find the exact folder to send you, where can I find it???
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
How do I get the profiles to load automatically? I have the profiles from you imported, and CarsList_ACC.xml overwritten in the C:\Users\myname\AppData\Local\Fanatec\FanaLab\xml folder, and the car's profile shows as assigned (the little car icon to the left of the profile is showing, and when the car list for the specific profile is expanded, the correct car is ticked).
I'm probably missing something obvious, but I have no idea what it is.
The only way for me to get the correct profile loaded for the correct car, is to do it manually.
EDIT: Now randomly it worked one time, and broken again the time after. I have no clue why.
I am also getting the same problem, the profiles for iracing are not loading autmatically. I have moved "ProfileCarsList_iRacing" files to the correct location and all other profiles are from the most recent Maurice profiles list.
Not a major issue a I can load manually, but it certinaly a "nice to have" when it is working which it was prior to this update.
I have no idea what you both are doing wrong. CDALP should work fine even with the latest version 2.00.06 and my most recent profiles which I have uploaded together with the 2.00.06 version.
I can only advise you, when you have issues, then delete the whole xml folder and bind the cars by yourself through the UI instead of copy-paste my lists. It also is a fast process and takes just 2 minutes or so.
I hope someone can help me, I downloaded fanalab and it recognizes my hub and steering wheel (Formula V2.5X) perfectly!
I have tried several times to make the LED adjustments for F1 2023, only when I start the game fanalab immediately turns off + there are no changes in my LEDs, even when I turn on the telemetry in the game
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
I think I have to make this post a sticky one as often as I have to copy/paste it....
Hello!!. I think the same thing happens to all of us. Fanalab disconnects in the middle of a race. Also automatic profiles sometimes do not load. Or they are partially loaded. Since sometimes only the braking parameter varies etc etc... I hope this will be fixed soon with the new version :)
Hello, I have the latest version of Fanalab installed and it is giving me problems. I play in Assetto corsa competition, it usually happens to me that when I change sessions, for example from qualy to race, fanalab closes and I lose the connection with the steering wheel, I have to turn off the DD2 base and restart the game. I pass the Log in case it helps. Thank you
I have CSL DD 8nm. CUrrently using a Porsche Podium Module and wheel. The new version: 2.00.06 immediately closes when I click to enable Rev LEDS (the little switch). It does not matter which game/profile I have selected. I guess I should use an older version that is stable? How do i access older versions?
Try the workarounds I have posted dozens of times in this thread or wait for the next version which will fix the Crashing issues and is targeted to be released today.
So version 2.00.06 crashes every time I try click any setting, but 1.99.05 seems to work OK. I am new to Fanalab, but have been using Fanatec gear for over 15 years. Can anyone help me setup Fanalab LEDs to work with the new Forza Motorsport. The issue is that unlike Forza 7 where the color was yellow/red/blue and then blink for redline, the new Forza is just yellow to red with no redline blink (and it maxes out way before redline). Its basically useless and I am having to watch the screen too much. It would be nice to have the Podium Module work like it did with Forza 7 stock (no Fanalab needed). But if I can setup Fanalab to do the trick, that would be cool too.
I did try to create a custom game, and I can get it to launch the new Forza, but the LEDs look the same. It does show a tiny ITM in the LED display - this shows whether I enable or disable the ITM slider in Fanalab. Fanalab does show my wheelbase (CSLDD 8Nm), Podium Module and Pedals (CS V3); but it says at the top "No Game Running". So I'm guessing its not getting data from Forza
Comments
No problem, figured I'd ask!
Hi,
I had version 1.99.02 and it worked perfectly.
I installed version 2.00.06 and when Fanalab starts, it closes after a few seconds and I can't use it.
I have driver 451, so I can't install an older version of Fanalab. What information can I provide to help you understand how to solve this?
Or do you happen to have an installation of 1.99.02 that worked for me?
Thank you!
Try the workaround here: https://forum.fanatec.com/discussion/comment/99368/#Comment_99368
Or try the workaround here: https://forum.fanatec.com/discussion/comment/99491/#Comment_99491
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
non
funziona nessun aggiornamento se non 1.61
csl dd 8nm
win 11
driver 451 installato
Please post in English according to the forum rules.
I dont understand your issue.
The logs say you have driver 450 with FanaLab 1.69.7 installed and you last used it on 2nd June. Therefore the logs also are named 02-06-2023.
This thread is about FanaLab 2.00.06 and for this version you need driver 451.
These logs dont say anything about a possible issue you might have with 2.00.06.
okok sorry, I have installed all drivers 451 and fanalab 2.06 but the application crashes at the start, I can't find the exact folder to send you, where can I find it???
Try the workaround here: https://forum.fanatec.com/discussion/comment/99368/#Comment_99368
Or try the workaround here: https://forum.fanatec.com/discussion/comment/99491/#Comment_99491
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
How do I get the profiles to load automatically? I have the profiles from you imported, and CarsList_ACC.xml overwritten in the C:\Users\myname\AppData\Local\Fanatec\FanaLab\xml folder, and the car's profile shows as assigned (the little car icon to the left of the profile is showing, and when the car list for the specific profile is expanded, the correct car is ticked).
I'm probably missing something obvious, but I have no idea what it is.
The only way for me to get the correct profile loaded for the correct car, is to do it manually.
EDIT: Now randomly it worked one time, and broken again the time after. I have no clue why.
I am also getting the same problem, the profiles for iracing are not loading autmatically. I have moved "ProfileCarsList_iRacing" files to the correct location and all other profiles are from the most recent Maurice profiles list.
Not a major issue a I can load manually, but it certinaly a "nice to have" when it is working which it was prior to this update.
I have no idea what you both are doing wrong. CDALP should work fine even with the latest version 2.00.06 and my most recent profiles which I have uploaded together with the 2.00.06 version.
I can only advise you, when you have issues, then delete the whole xml folder and bind the cars by yourself through the UI instead of copy-paste my lists. It also is a fast process and takes just 2 minutes or so.
I tried deleting the xml file and then adding a few manually and it works as expected. Not sure why the profile list didnt work, user error no doubt!
Thanks Maurice!
Hi,
I hope someone can help me, I downloaded fanalab and it recognizes my hub and steering wheel (Formula V2.5X) perfectly!
I have tried several times to make the LED adjustments for F1 2023, only when I start the game fanalab immediately turns off + there are no changes in my LEDs, even when I turn on the telemetry in the game
Thank you very much in advance
nice weekend
Try the workaround here: https://forum.fanatec.com/discussion/comment/99368/#Comment_99368
Or try the workaround here: https://forum.fanatec.com/discussion/comment/99491/#Comment_99491
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
I'm having an issue with this new fanalab. It doesn't load the proper ITM even though it is starred and when i manually enable it, fanalabs closes.
Any Ideas?
Try the workaround here: https://forum.fanatec.com/discussion/comment/99368/#Comment_99368
Or try the workaround here: https://forum.fanatec.com/discussion/comment/99491/#Comment_99491
As you did not uploaded any Logs, its not possible to say what exactly causes the crash for you but those are two workaround for two different scenarios to fix existing crashing issues in 2.00.06 which will be fixed early next week with a new version.
Therefore: For every crash report it is crucial to upload the log files, its not possible to investigate crash reports otherwise.
Can be found in C:\Users\Public\FanaLab Logs (Zip the whole folder).
I think I have to make this post a sticky one as often as I have to copy/paste it....
here are the all the files in that folder. and its not a hard crash. the program just closes,
How to download the previous version?
This version is causing you to lose communication with the base in the middle of the race
Hello!!. I think the same thing happens to all of us. Fanalab disconnects in the middle of a race. Also automatic profiles sometimes do not load. Or they are partially loaded. Since sometimes only the braking parameter varies etc etc... I hope this will be fixed soon with the new version :)
Must Fanalab and the Fanatec driver be on the C:drive?
Yes.
Can you change how bright is the led lights in the wheel?
No.
Hello, I have the latest version of Fanalab installed and it is giving me problems. I play in Assetto corsa competition, it usually happens to me that when I change sessions, for example from qualy to race, fanalab closes and I lose the connection with the steering wheel, I have to turn off the DD2 base and restart the game. I pass the Log in case it helps. Thank you
Will be fixed with the next version.
The logs have only empty files.
But most likely ITM related and fixed with the next version.
Do you know the release date of the new version?
It was built today and gets tested internally now.
Could be tomorrow if no big issue gets found overnight :)
I have CSL DD 8nm. CUrrently using a Porsche Podium Module and wheel. The new version: 2.00.06 immediately closes when I click to enable Rev LEDS (the little switch). It does not matter which game/profile I have selected. I guess I should use an older version that is stable? How do i access older versions?
Try the workarounds I have posted dozens of times in this thread or wait for the next version which will fix the Crashing issues and is targeted to be released today.
So version 2.00.06 crashes every time I try click any setting, but 1.99.05 seems to work OK. I am new to Fanalab, but have been using Fanatec gear for over 15 years. Can anyone help me setup Fanalab LEDs to work with the new Forza Motorsport. The issue is that unlike Forza 7 where the color was yellow/red/blue and then blink for redline, the new Forza is just yellow to red with no redline blink (and it maxes out way before redline). Its basically useless and I am having to watch the screen too much. It would be nice to have the Podium Module work like it did with Forza 7 stock (no Fanalab needed). But if I can setup Fanalab to do the trick, that would be cool too.
I did try to create a custom game, and I can get it to launch the new Forza, but the LEDs look the same. It does show a tiny ITM in the LED display - this shows whether I enable or disable the ITM slider in Fanalab. Fanalab does show my wheelbase (CSLDD 8Nm), Podium Module and Pedals (CS V3); but it says at the top "No Game Running". So I'm guessing its not getting data from Forza
Any help would be greatly appreciated.