Ill leave it to support so. I went back to 429 and its firmware's and earlier Fanalab also. Not driven much on it yet but will update as to whether or not the issues have gone away.
For the PBME connected via CS Universal Hub V2 for Xbox, when I do a LED test in the driver application only the side led triangles light up, not the top row.
When I do the same LED test in the Windows Properties Panel for the PBME it’s the inverse, only the top row lights up, not the side triangles.
Trying the Formula V2 in the driver application works fine, all LEDs light up.
Sorry have to correct myself as this is actually incorrect.
With Driver 429 you should use Fanalab 1.60.2 and not 1.60.6, every newer version is already on profile structure 2.0 with Tuning Menu v2 which is then only compatible with Firmwares from driver 431 or newer.
The exact same as I described earlier, I will copy them and reference to it. I also took a video of it but can’t post it here. Now I don’t have to alt+tab to get these errors, now they are always present, even though I reboot the computer, the game and the wheel base.
“Still the same happening. When I’m in F1 game, alt+tab and enter Fanlab to change something, for example FFB. When I go back into the game, the display on the wheel is different with lights, shows speed and also which gear. Does not show colors for when to shift. At the same time FFB is very out of control. Just pushing the wheel a little bit one direction creates a massive impulse, it can bounce from side to side and suddenly let go and then going on again (FFB). Aldo the vibrations in my Clubsport V3 pedals is on, they are usually not on in F1 game.”
Thanks, I couldn't view the video anymore but know what you mean.
We are investigating the issue and could also reproduce it on our end. So far only with iRacing but we think the issue is on our end. It happens for a fraction of a second, maybe only iRacing picks this up or is more likely to pick it up than other sims.
The issue is not being ignored, I've responded to it before but this can easily get lost in so many pages.
We can reproduce the issue and are investigating the root cause. I have no clear time frame for the fix yet because we don't know how complex the solution will be.
Which pedals do you have? Some of our pedals have 10, the CSP V3 have 1 increment. You could also play with the min/max setting in the driver or the game to get the desired effect.
I'll try to find out if it has a technical reason and if its possible to have all pedals at 1 increment like the CSP V3 but that might take a while which is why you could try the suggested workaround above.
Thanks, it works after I restart the base. Btw any chance to have scale 0-100 again?
I noticed a new issue, Gran Turismo Sport related.
GT DD PRO on PS5 and CSL Elite+ on PS4, both on 434
While driving, no matter which mode, public lobby, private lobby, arcade mode, etc, when I press Tuning menu button on wheel to go out of the menu, picture freezes for a split second.
Comments
glad to hear that :-) and lookin forward for a fix - thanks
Did you update the firmware's using driver 429?
Yes, I did both.
Ill leave it to support so. I went back to 429 and its firmware's and earlier Fanalab also. Not driven much on it yet but will update as to whether or not the issues have gone away.
Latest drivers and firmwares for all devices.
For the PBME connected via CS Universal Hub V2 for Xbox, when I do a LED test in the driver application only the side led triangles light up, not the top row.
When I do the same LED test in the Windows Properties Panel for the PBME it’s the inverse, only the top row lights up, not the side triangles.
Trying the Formula V2 in the driver application works fine, all LEDs light up.
A problem in the firmware of the CS UHX?
I reported the same issue. It's most probably a firmware issue but not sure of which component (CSL dd, uhv2, pbme).
https://forum.fanatec.com/discussion/24339/fanatec-driver-431beta-for-csl-csw-and-podium-wb-all-wheels/p4
See Marcel's reply in the link above, fort post on page 4.
Yes, it's an issue of the BME Firmware v19 and will be fixed with a v20 sometime soon.
Thanks Konrad and Maurice!
Sorry have to correct myself as this is actually incorrect.
With Driver 429 you should use Fanalab 1.60.2 and not 1.60.6, every newer version is already on profile structure 2.0 with Tuning Menu v2 which is then only compatible with Firmwares from driver 431 or newer.
I tried this, still the same errors.
What errors?
The exact same as I described earlier, I will copy them and reference to it. I also took a video of it but can’t post it here. Now I don’t have to alt+tab to get these errors, now they are always present, even though I reboot the computer, the game and the wheel base.
“Still the same happening. When I’m in F1 game, alt+tab and enter Fanlab to change something, for example FFB. When I go back into the game, the display on the wheel is different with lights, shows speed and also which gear. Does not show colors for when to shift. At the same time FFB is very out of control. Just pushing the wheel a little bit one direction creates a massive impulse, it can bounce from side to side and suddenly let go and then going on again (FFB). Aldo the vibrations in my Clubsport V3 pedals is on, they are usually not on in F1 game.”
Ok thanks for the correction, much appreciated.
I installed 1.60.2 and I got a "profile mismatch, please use latest Fanalab" warning.
So I just saved the profile again and it went away. I presume that was ok to do?
Are you using Natural Friction (NFR) or other settings and does it affect the issue when you turn them down to OFF??
Thank you for doing so, do you know which files these are so we can check as well?
And the problem goes away again when flashing an older firmware version?
Would be interesting if the problem comes with BME FW 19, PHUB FW 6 or the new base FW
We'll have a look.
Thanks for the file name, we'll have a look
Thanks, I couldn't view the video anymore but know what you mean.
We are investigating the issue and could also reproduce it on our end. So far only with iRacing but we think the issue is on our end. It happens for a fraction of a second, maybe only iRacing picks this up or is more likely to pick it up than other sims.
Thanks for the update on the situation, we'll have a look but as mentioned before it would still be good to know which files were flagged.
We'll give this a try
Try:
We've recognized that these things prevent BLI from working
All these activate the vibration feature from PC and this seems to deactivate BLI
Thanks for the info, we will have a look if we can also see a relation between NFR and the issue of FFB not getting stopped when going into a menu.
We can reproduce the NFR issue and are currently looking into the root cause with high priority
Does it work when you chose manual update mode in the top right and do the updates step by step? When doing so there is no pop-up like this.
The issue is not being ignored, I've responded to it before but this can easily get lost in so many pages.
We can reproduce the issue and are investigating the root cause. I have no clear time frame for the fix yet because we don't know how complex the solution will be.
Which pedals do you have? Some of our pedals have 10, the CSP V3 have 1 increment. You could also play with the min/max setting in the driver or the game to get the desired effect.
I'll try to find out if it has a technical reason and if its possible to have all pedals at 1 increment like the CSP V3 but that might take a while which is why you could try the suggested workaround above.
Thanks, it works after I restart the base. Btw any chance to have scale 0-100 again?
I noticed a new issue, Gran Turismo Sport related.
GT DD PRO on PS5 and CSL Elite+ on PS4, both on 434
While driving, no matter which mode, public lobby, private lobby, arcade mode, etc, when I press Tuning menu button on wheel to go out of the menu, picture freezes for a split second.
The freeze when closing the Tuning Menu was always there, not new ;)
AFAIK that's "normal" and cant be fixed.
I never noticed that till 434. I have CSL Elite since summer 2020 and DD Pro from "day one" 🤷🏻♂️