I think I know why we are getting different results. I notice you have your rF2 profile loaded in Fanalab even though rF2 is not running. If you see below, I haven't got a profile loaded and can make the changes, select my rF2 profile and save it. My profile automatically loads when I start rF2, but not when I start Fanalab on its own.
Good luck with this, I'm interested to know how you get on!
i've tested the LED screen without profile and rF2 started and it's now possible to adapt the LED's.
So thank you for your help. :)
When i save the profile it will become active automatically and then i again couldn't adapt the LEDs. Unloading the profile isn't possible so i have to restart fanalab. But this is okay at the moment.
Maybe fanatec could look into it sometime in the future and solve this behavior.
I'm not sure if the behavior was the same in the past but i do know, that i've adapted the LEDs sometimes in the past.
I've never had the side LEDS working until this Fanalab version, except pitlane/limiter. I do suspect Fanatec are working on the LED functionality for rF2, so it would be nice to hear from them about this 😉
Hi guys. Just wondering if there was any chance of a colour picker with a larger range of colours? So many cars use different shades or colours than those available in the Fanalab LED screen. No biggie, just a query. Thanks.
I've got the same. Everything works, just no tuning menu. Also on the main menu my csl elite ps4 wheel base doesn't show a picture of the base, only the name of the base and the pictures and names of the wheel and pedals. Luckely are the presets that i made still work.
I use the csl elite wheel base with a formula v2 steering wheel and csl pedals with loadcell.
Thanks for the info, its the same for me, we'll fix it in a future update.
Until it's fixed a workaround could be to change the settings in another game where they are available and then saving it again for rF2. It will be grayed out but should be the color you changed it to.
The Setups 1-5 are saved on the base and having a different windows installation won't make it possible to have two different instances of saved settings on the base. However for FanaLab itself and the settings saved there this would help.
you can change when and how it flashes in FanaLab, some cars in iRacing have a weird range for percentage in the telemetry and you might need to switch FanLab to adjust with RPM and then move the sliders to get the desired threshold.
In updating to 415, my screen is stuck on "Please wait...". It's been about 30 minutes. But Task Manager doesn't say "Not responding". Is it safe to close the program and re-try?
Might be better when you post this in the driver 415 thread as it's not a Fanalab issue it seems when you write you installed driver 415 and then have issues
Since the driver is on my PC, my Club Sport Wheel Base V.25 starts shaking and wobbeling as soon as I open the Fanatec Control Panel advanced tab. Even by switching on/off the wheel it doesn´t stop and starts as soon as the reset is done. Also rebooting does not help. I uninstalled and re-installed the driver several times. After the first reboot (after the new installation of the driver and without opening the Control Panel advanced tab) I can start a game like iRacing... wheel and pedals work fine. As soon as I open the Control Panel advanced tab, the wheel starts shaking heavily and I have to uninstall the driver and re-install, else it wouldnot stop (like said, even after rebooting and sitch on/off of the wheel).
I can´t update the Firmware too.. the application stops as soon as I click Update Firmware (the wheel still shaking).
is an update planned where the F1 2021 telemetry is working correctly with Fanalab and the Formula V2 wheel? I mean the game has been out for 3 months now.... also the Formula V2 was pretty expensive and I cen't even get it to display the current gear without fanalab (well, right now it works but only in Time Trial mode, not in multiplayer).
I also wait and wait and wait for them updating to the 2021 telemetry. It is so annoying that i can not use all the other programms which use the 2021 Telemetry already, because I have to use 2020 for Fanalab...
Is it just me or the attachment server is down? When I try to download the file it keeps saying "Failed - No file", on both Chrome and Edge. Also, all the images aren't loading, e.g. avatars, screenshots, etc..
Comments
Hi Stefan
I think I know why we are getting different results. I notice you have your rF2 profile loaded in Fanalab even though rF2 is not running. If you see below, I haven't got a profile loaded and can make the changes, select my rF2 profile and save it. My profile automatically loads when I start rF2, but not when I start Fanalab on its own.
Good luck with this, I'm interested to know how you get on!
Gray
Hi Graham,
i've tested the LED screen without profile and rF2 started and it's now possible to adapt the LED's.
So thank you for your help. :)
When i save the profile it will become active automatically and then i again couldn't adapt the LEDs. Unloading the profile isn't possible so i have to restart fanalab. But this is okay at the moment.
Maybe fanatec could look into it sometime in the future and solve this behavior.
I'm not sure if the behavior was the same in the past but i do know, that i've adapted the LEDs sometimes in the past.
Maybe i've also didn't started rF2 the last time.
Stefan
Game: ACC
Driver: 415
Wheel: CSW 2.5
Fanalab: 1.57.4
Issue: LED not syncro anymore despite the Fanatec LED plugin disabled in game general options
Can you help me please?
Or anyone nice to post the ACC Ferrari 488 Evo RPM values?
You're welcome for the help Stefan :)
I've never had the side LEDS working until this Fanalab version, except pitlane/limiter. I do suspect Fanatec are working on the LED functionality for rF2, so it would be nice to hear from them about this 😉
Gray
Hi all,
Are there step by step instructions somewhere on how to load only the LED module of a profile onto the active profile?
The "save" way: take a screenshot of the desired LED settings and dial them into your active desired profile manually.
The smart way:
The newly created profile should contain the FFB settings from the one and the LED settings from the other profile.
Hi guys. Just wondering if there was any chance of a colour picker with a larger range of colours? So many cars use different shades or colours than those available in the Fanalab LED screen. No biggie, just a query. Thanks.
Coming later.
Great. Thanks
Will there also be a chance of dimming the LED's? They can be very bright in a dark room.
I've got the same. Everything works, just no tuning menu. Also on the main menu my csl elite ps4 wheel base doesn't show a picture of the base, only the name of the base and the pictures and names of the wheel and pedals. Luckely are the presets that i made still work.
I use the csl elite wheel base with a formula v2 steering wheel and csl pedals with loadcell.
The Radical SR8 in iRacing is blinking for rev limiter on Podium Endurance module way earlier than it should so it is almost always blinking
Thanks for the info, its the same for me, we'll fix it in a future update.
Until it's fixed a workaround could be to change the settings in another game where they are available and then saving it again for rF2. It will be grayed out but should be the color you changed it to.
When trying this everything works fine for me, do you have the BME mounted to a Podium Hub or a ClubSport Universal Hub?
The Setups 1-5 are saved on the base and having a different windows installation won't make it possible to have two different instances of saved settings on the base. However for FanaLab itself and the settings saved there this would help.
thanks for the update
Maurice posted some ACC LED settings in the second post on the first page of this thread.
https://forum.fanatec.com/discussion/comment/68699/#Comment_68699
On some wheels this could be added in the future and we are looking into it.
you can change when and how it flashes in FanaLab, some cars in iRacing have a weird range for percentage in the telemetry and you might need to switch FanLab to adjust with RPM and then move the sliders to get the desired threshold.
In updating to 415, my screen is stuck on "Please wait...". It's been about 30 minutes. But Task Manager doesn't say "Not responding". Is it safe to close the program and re-try?
Might be better when you post this in the driver 415 thread as it's not a Fanalab issue it seems when you write you installed driver 415 and then have issues
hi
I have updated my driver to 415 x64.
Since the driver is on my PC, my Club Sport Wheel Base V.25 starts shaking and wobbeling as soon as I open the Fanatec Control Panel advanced tab. Even by switching on/off the wheel it doesn´t stop and starts as soon as the reset is done. Also rebooting does not help. I uninstalled and re-installed the driver several times. After the first reboot (after the new installation of the driver and without opening the Control Panel advanced tab) I can start a game like iRacing... wheel and pedals work fine. As soon as I open the Control Panel advanced tab, the wheel starts shaking heavily and I have to uninstall the driver and re-install, else it wouldnot stop (like said, even after rebooting and sitch on/off of the wheel).
I can´t update the Firmware too.. the application stops as soon as I click Update Firmware (the wheel still shaking).
Anyone having an idea what I can do ?
Thank you
Better post in driver 415 Feedback thread as it's clearly not a Fanalab issue.
Hey,
is an update planned where the F1 2021 telemetry is working correctly with Fanalab and the Formula V2 wheel? I mean the game has been out for 3 months now.... also the Formula V2 was pretty expensive and I cen't even get it to display the current gear without fanalab (well, right now it works but only in Time Trial mode, not in multiplayer).
FanaLab is using F1 2020 telemetry for now and thats working just fine, actually even better than 2021 telemetry.
I also wait and wait and wait for them updating to the 2021 telemetry. It is so annoying that i can not use all the other programms which use the 2021 Telemetry already, because I have to use 2020 for Fanalab...
Get it going please Fanalab developers!
Is it just me or the attachment server is down? When I try to download the file it keeps saying "Failed - No file", on both Chrome and Edge. Also, all the images aren't loading, e.g. avatars, screenshots, etc..
It also does not work for me. And yes, the images all are not loading. Maybe some website problems. Hope they are solved soon.
yeah its the same for me... wonder if its something to do with the internet outage yesterday?