curiosity, so for those who have a DD+ it is better to set the ffb to 100% (15nM). I installed the profiles I found here. and they set the base to 100% FFB and like ACC to 60% now you can feel the effects. so Maurizio confirm that the DD+ must be kept at the Max?
I set up a script and updated all of the DD2 values for the DD1 in iRacing. I can put together another script to do all of the cars in the next week or so.
Any reports of Fanalab causing disconnects? Maybe it is coincidence but I seem to have more disconnects when I have Fanalab open and controlling my wheels LEDs/settings.
If I don't use Fanalab and just use a saved profile on wheel, I don't get disconnects as often or at all...
thanks to maurice for his profiles which are top of the top, at one point giving fanalab was able to detect the car that we selected in the game, and that loaded the profile which was going well for a while I don't know which one anymore. update I no longer have this function
so, I closed Fanalab, deleted the XML folder, ran the installation file and chose "Repair", opened Fanalab, somehow all my profiles are still there....still doesn't auto-load based on car that I am driving.
Every time I update FANLAB, I need to import the configuration file again. So, how can I get the vehicle parameters I previously set into the new version? The new configuration file will overwrite it, right?
I used to uninstall FANLAB and install a new version every time, so the files were cleaned up every time. Then, I downloaded your latest configuration file again and imported it
Even when clicking that then the profiles will stay, that option just resets the settings back to default but it wont delete anything. They will NEVER get deleted until you manually delete them.
Comments
hi Maurice,
any info on the new iracing superformula LIGHT profile?
Released on Tuesday, see previous page.
55%.
Everything are the same when i playing, except the BRF. When the game is loading the race, then is still 55%, when i'm on the PIT, then set to 50%.
I playing AC, and ACC, and thats work perfectly, never change my BRF.
Video about this issue:
curiosity, so for those who have a DD+ it is better to set the ffb to 100% (15nM). I installed the profiles I found here. and they set the base to 100% FFB and like ACC to 60% now you can feel the effects. so Maurizio confirm that the DD+ must be kept at the Max?
I have no idea, sry.
Working fine for me, BRF gets loaded correct.
confirm.
I set up a script and updated all of the DD2 values for the DD1 in iRacing. I can put together another script to do all of the cars in the next week or so.
Here are the DD1 settings:
May I ask you, What might you be modifying for the ffb? Just bringing down strength in game? I have a DD as well.
Edit: I should probably ask if you are using the DD+ or the DD2 profiles.
You're a hero, by the way.
You too, Maurice.
bonjour Maurice , est qu'il est possible d'installer le jeu LE MAN ULTIMAT sur le logiciel FANALAB merci d'avance
I dont understand that language. Please post in English according to the forum rules.
hello Maurice, is it possible to install the game LE MAN ULTIMAT on the FANALAB software thank you in advance
Support for LMU is included in FanaLab 2.01.28.
Ehy Saniel, I use DD's parameters, I increased the force in game to 85
Hello Maurice,
Any reports of Fanalab causing disconnects? Maybe it is coincidence but I seem to have more disconnects when I have Fanalab open and controlling my wheels LEDs/settings.
If I don't use Fanalab and just use a saved profile on wheel, I don't get disconnects as often or at all...
Has this been reported before?
Hello everyone
thanks to maurice for his profiles which are top of the top, at one point giving fanalab was able to detect the car that we selected in the game, and that loaded the profile which was going well for a while I don't know which one anymore. update I no longer have this function
Do you know how to put it back into service?
Thank you for your answers
Maybe something wrong with the Fanalab, because when i not use, the BRF not change from 55% to 50%.
When i was use, the BRF always set to 50%. Then i set again to 55% and working, until i going to garage, then it's again 50%. It's super annoying.😔
Only this game doing that.
No idea, nobody else has the issue, so it cant be reproduced. Seems more likely it's something on your end and not a global Lab issue...
When will Fanalab be fixed so that profiles auto-load to the cars they are bound to, in iRacing?
Sorry, forgot to say I have 2.01.21 and CS DD+
Such an issue is not known, it's working fine for everyone else.
Seems to be an issue with your xml folder, try to delete it and start from scratch.
Interesting, because i not have any profile with 50% BRF, so don't know, why this happening.🤔
Reinstalled the Fanalab, but this not helped.
I'm with DD1 / 455 driver.
Idk.
so, I closed Fanalab, deleted the XML folder, ran the installation file and chose "Repair", opened Fanalab, somehow all my profiles are still there....still doesn't auto-load based on car that I am driving.
Then you deleted the wrong xml folder in the installation direction instead of AppData.
its working, thanks
Every time I update FANLAB, I need to import the configuration file again. So, how can I get the vehicle parameters I previously set into the new version? The new configuration file will overwrite it, right?
What do you mean?
Profiles stay when you update the Lab Version. In general nothing needs to be imported again...
I used to uninstall FANLAB and install a new version every time, so the files were cleaned up every time. Then, I downloaded your latest configuration file again and imported it
Not needed. The profiles will stay even when you uninstall the Lab.
There is an option after uninstallation asking to remove user settings or something like that - he probably clicked Yes on that.
Even when clicking that then the profiles will stay, that option just resets the settings back to default but it wont delete anything. They will NEVER get deleted until you manually delete them.