Just load the profile and overwrite is again, then the profile is saved with your devices and you wont get that message shown again.
When the loads are still default then you did not disabled the native LED support by clicking on the two green buttons in the Game Profile Tab in FanaLab to enable Telemtry and FanaLab support to disable native support.
This is my process: Import profile, Load profile (Device mismatch), Enable telemetry (iRacing: No setup needed message), Enable Fanalabs game/LED support ( uncheck wheel shift indicator message, already unchecked.) then save and overwrite profile. Rev lights then show at default levels.
Good afternoon! Base DD2, McLaren GT3 V2, profile for BMW M4 GT3 in Assetto Corsa Competizione. FFB in profile 52, in game 60. Isn't that too much? How much can be reduced to bring it closer to the real BMW M4 GT3? Maurice Have you tried this car? Thanks!
I am missing (2) app.ini parameters that Maurice Boschen suggests be changed in his #README file that comes with his very much appreciated custom profiles for Fanalab. What should I do?
I am attempting to honor the #README instructions that come with Maurice Boschen's profiles, but My app.ini file does not contain steeringDampingParkedMaxPercent or steeringFFBSmooth.
Should I ignore those since my app.ini doesn't have them? Or maybe, since they are missing, I should create a new line in the file and add those parameters?
Any advice on this issue would be much appreciated.
I added EA WRC to Fanalab via the "Add Custom Game" process (on the Fabalab MAIN tab). You will need to specify the path to the WRC.EXE file. Then create a PWS profile for the cars. I created one generic PWS and marked it as a favorite so it loads automatically with the game. CDALP is probably not an option unless Fanatec decides to add support for it. Attached is a zip with a screenshot of my in game FFB setings and the generic PWS if you wish to try it.
I don't have Forza Motorsport but I was curious because I do love a good racing sim so I took a look at it on Steam. WOW! It's kinda expensive and the reviews about the new 2023 version are horrendous. Not for me right now. Is there not an EXE that launches Forza like there is for EA WRC? Did you check the process list in task manager when Forza is running?
Yes there is an exe, but it gives me an error when I try to add it.
It's included with GamePass that's why I play it. Wouldn't have payed 70+ euros for it. And it is not really a sim, more arcade like.
But I had to quit iRacing because of ongoing shoulder issues (been recovering for over 2 years now ) and ever since trying to find something that is decent online. AMS2 is just so empty online.
Ah... got it. Sorry you have a bad shoulder. I love AMS2 but I do get what your saying about it being "empty". I have had some really great experiences in AMS2 but they are few and far between. Get well!
Comments
Just load the profile and overwrite is again, then the profile is saved with your devices and you wont get that message shown again.
When the loads are still default then you did not disabled the native LED support by clicking on the two green buttons in the Game Profile Tab in FanaLab to enable Telemtry and FanaLab support to disable native support.
Done this. LED's and rev lights percentages are still staying at default.
Dont know, you are doing something wrong then..
Without a video its most likely impossible to say what exactly you are doing wrong..
This is my process: Import profile, Load profile (Device mismatch), Enable telemetry (iRacing: No setup needed message), Enable Fanalabs game/LED support ( uncheck wheel shift indicator message, already unchecked.) then save and overwrite profile. Rev lights then show at default levels.
Got it working now, for some reason my Fanalabs was out of date by a while, even though the updater said it was up to date.
Great work! Thank you very much. Are you planning to add Thunderflash Mods for AMS2 as well? Would be awesome!
They are all included in the CarsList CUstom files for CDALP. However, way too many cars to make profiles for them.
Maurice, do you plan to do profiles for the new csdd/csdd+ instead of dd2 ones? or both? Thanks!
Hi Maurice,
First time, thanks a lot for these setups, for iRacing this is fabulous !
For rFactor 2, i need to use the Oreca LMP2, which one i need to use ? The Radical maybe ?
Thanks a lot
Hi, is there any profile for the EA WRC game? thanks
No because Fanalab does not support this game.
looking for a profile for the nascar trucks and xfinity in iRacing. I have been using the next gen but was looking for something built for these
I dont make profiles for Oval stuff as I am absolutely no Oval guy, sorry.
they run on road courses too lol. plus you did a next gen
I still wont make new NASCAR profiles because I simply drive them so I wont spend my personal money to buy these cars.
hmmm if someone donated the cash for one id donate for there other lol
Game: iRacing
Profile/Car: Dallara IR18
Steering Wheel: Formula V2
Fanalab Version: 2.01.12
PC DRIVER: 454
Game: iRacing
Profile/Car: Cadillac V-Series.R GTP
Steering Wheel: Formula V2
Fanalab Version: 2.01.12
PC DRIVER: 454
RennSport Settings?
Currently using:
RennSport in-game:
Force Strength 100
Invert Yes
Filter 0
Wheel Torque Capability 28
Sensitivity 125
Minimum Force 0
Tick Rate 400
FanaLab:
SEN 1080
FFB 100%
FFS Peak
NDP Off
NFR Off
NIN Off
INT 1
FEI 100
FOR 100%
SPR 100%
DPR 100
BLI Off
BRF 40%
CSL DD 8Nm / GRID MPX / V3's
The FFB seems better, but the rumble strips are too much
Good afternoon! Base DD2, McLaren GT3 V2, profile for BMW M4 GT3 in Assetto Corsa Competizione. FFB in profile 52, in game 60. Isn't that too much? How much can be reduced to bring it closer to the real BMW M4 GT3? Maurice Have you tried this car? Thanks!
I am missing (2) app.ini parameters that Maurice Boschen suggests be changed in his #README file that comes with his very much appreciated custom profiles for Fanalab. What should I do?
I am attempting to honor the #README instructions that come with Maurice Boschen's profiles, but My app.ini file does not contain steeringDampingParkedMaxPercent or steeringFFBSmooth.
Should I ignore those since my app.ini doesn't have them? Or maybe, since they are missing, I should create a new line in the file and add those parameters?
Any advice on this issue would be much appreciated.
I added EA WRC to Fanalab via the "Add Custom Game" process (on the Fabalab MAIN tab). You will need to specify the path to the WRC.EXE file. Then create a PWS profile for the cars. I created one generic PWS and marked it as a favorite so it loads automatically with the game. CDALP is probably not an option unless Fanatec decides to add support for it. Attached is a zip with a screenshot of my in game FFB setings and the generic PWS if you wish to try it.
Forgot to mention: I have a DD2. (The PWS is for a DD2).
can older profiles work with the new update 2.01.12 of fanalab? as example 2.00.09 profiles
yes
Does anybody have anything for the ClubSport DD?
I received it last week, but I hate it. Undriveable. Can't get any game to feel even close to my CSL DD 8 Nm which I sold a few weeks ago.
Too bad this doesn't work for Forza Motorsport. Haven't found a way to add that.
I don't have Forza Motorsport but I was curious because I do love a good racing sim so I took a look at it on Steam. WOW! It's kinda expensive and the reviews about the new 2023 version are horrendous. Not for me right now. Is there not an EXE that launches Forza like there is for EA WRC? Did you check the process list in task manager when Forza is running?
Yes there is an exe, but it gives me an error when I try to add it.
It's included with GamePass that's why I play it. Wouldn't have payed 70+ euros for it. And it is not really a sim, more arcade like.
But I had to quit iRacing because of ongoing shoulder issues (been recovering for over 2 years now ) and ever since trying to find something that is decent online. AMS2 is just so empty online.
Ah... got it. Sorry you have a bad shoulder. I love AMS2 but I do get what your saying about it being "empty". I have had some really great experiences in AMS2 but they are few and far between. Get well!