I received the new BMW GT2 V2 wheel today, and it's not recognized by Fanalab 1.57.4. Any idea when a compatible version will be available so we can configure the RPM LEDs and 8 segment display?
So i have a CSL DD, to get the REV Light´s in work in iRacing you have to install FANALAB.
This Pice of Code is a big mess.
It runs for a Week or 2 ,all good.
Then you are driving in a Race or Practice and Fanalab begins to restart it self and during this time you don´t have any FFB.
What will Fanatec do?
Nothing, because no one care´s.
i know a Lot´s off Guy´s with this Problem but nobody right´s it down here.
I´m boiling, in 15 Month i have Spent over 1.2k for Equipment from Fanatec, and in 15 Month i tested Fanalab 10 Time´s and allways the same it crashes or is restarting. A Big MESS.
But know i have a Problem i musst use this big Mess. Because i was Dumb and have buyed a CSL DD.
So Please Fanatec Coder´s do you Job and make this Fanalab Stable on every PC
Problems with Fanalab do not result in no FFB. That's impossible. So your issue is more likely related in Firmware or Driver but not Fanalab.
For literally almost everyone else Fanalab is stable and Doesnt Crash so there must be an issue on your side.
And finally, the CSL DD should be supported with the latest iRacing Builds just fine, including FlagLEDs. Maybe compatibility mode is required but it's definitely working fine for me without Fanalab.
(F1 2021) Every time I start a singleplayer race or start qualifying in multiplayer Fanalab crashes and the wheel just keeps vibrating and showing some random lights. In TimeTrial everything works fine. What could be the reason?
Marcel I'm having the same issue with the BME getting stuck in its tuning menu as well with the CSL DD. I'm on a Clubsport Universal Hub if it's any help.
Already uninstalled/reinstalled the drivers and Fanalab and still having the same result.
"For literally almost everyone else Fanalab is stable" ... maybe, but for the owners of DD2 who need to play in CSW 2.5 compatibility mode, especially for Project Cars 2, the issue I reported on September 1 is still not resolved. As a reminder, in CSW 2.5 mode, the ITM menu has disappeared since version 1.54.4 of Fanalab. I own a DD2 podium provided with a display that only partially works for one month and a half. So please i would like to know when you plan a fix for that. It worked before, it must work again.
Thank you for your succinct answer. However, it does not tell me how long will it take, and considering that we are talking about premium material, it's just a pity.
Good afternoon, I don't know if this is happening to me, it has already been exposed in the forum.
In iracing, when I am in practice or qualy, and time is up and I am driving, the quali or practice session closes, I stay on the main screen with the vibration motors, as they were at the time of closing.
Comments
Is there any other way to download Fanalab until the link here works again?
Any update on the download link? it still shows "failed - no file"
try this link https://fanatec.com/media/archive/69/40/a5/2021-8-27-Fanalab_v1-57-4.zip
thanks for giving that file Daniel....what about the current iracing profiles for 2021 on the first page. It is also not downloading?
Thanks a lot buddy
The download link (2021.8.27-Fanalab_v1-57.4.zip) does not work.
Same here. None of the links on Page 1 work.
try this link https://fanatec.com/media/archive/69/40/a5/2021-8-27-Fanalab_v1-57-4.zip
Look up a few posts to find the alternative link for the fanalab software
I have the software, but was looking to download the settings for a few games. Thanks
If anyone has the iRacing 2021 profiles, can I please have a copy?
This download problem has been going on for days now. Where are the Fanatec reps? At least tell us what is going on.
Agreed +1
after the background update of the forum the links all got lost.
That’s a shame because they should of fixed the links with the background
When will it be fixed?
I am getting telemetry uninitilazed when playing f12021 even though profile is active and fanalab works in game normally. Is this normal behavior?
formula v2.5 wheel, csw v2 base
Yes
I received the new BMW GT2 V2 wheel today, and it's not recognized by Fanalab 1.57.4. Any idea when a compatible version will be available so we can configure the RPM LEDs and 8 segment display?
Does anyone know when or how to get Fanalab REV LED to work on F1 2021 wiht using SImHub as well?
That's currently not possible AFAIK.
So i have a CSL DD, to get the REV Light´s in work in iRacing you have to install FANALAB.
This Pice of Code is a big mess.
It runs for a Week or 2 ,all good.
Then you are driving in a Race or Practice and Fanalab begins to restart it self and during this time you don´t have any FFB.
What will Fanatec do?
Nothing, because no one care´s.
i know a Lot´s off Guy´s with this Problem but nobody right´s it down here.
I´m boiling, in 15 Month i have Spent over 1.2k for Equipment from Fanatec, and in 15 Month i tested Fanalab 10 Time´s and allways the same it crashes or is restarting. A Big MESS.
But know i have a Problem i musst use this big Mess. Because i was Dumb and have buyed a CSL DD.
So Please Fanatec Coder´s do you Job and make this Fanalab Stable on every PC
Problems with Fanalab do not result in no FFB. That's impossible. So your issue is more likely related in Firmware or Driver but not Fanalab.
For literally almost everyone else Fanalab is stable and Doesnt Crash so there must be an issue on your side.
And finally, the CSL DD should be supported with the latest iRacing Builds just fine, including FlagLEDs. Maybe compatibility mode is required but it's definitely working fine for me without Fanalab.
i also was thinking it is the Driver, without Fanalab the loosing FFB issue never come´s. Only if Fanalab is Running.
i have seen it that Fanalab is restarting himself and during this time you don´t have any FFB.
So we are back at the Fanatec Point it´s my issue.
Thumbs up for this.
EDIT:
Thanks for the info that i don´t need Fanalab for iRacing.
i have deleted Fanalab -> doesn´t Work
So i have deleted Fanalab, Driver 415 and cleand my Registy.
Restart after deleting and restart after Registry clean.
then installed Driver 415 know it Run´s
(F1 2021) Every time I start a singleplayer race or start qualifying in multiplayer Fanalab crashes and the wheel just keeps vibrating and showing some random lights. In TimeTrial everything works fine. What could be the reason?
Marcel I'm having the same issue with the BME getting stuck in its tuning menu as well with the CSL DD. I'm on a Clubsport Universal Hub if it's any help.
Already uninstalled/reinstalled the drivers and Fanalab and still having the same result.
Hello everybody.
"For literally almost everyone else Fanalab is stable" ... maybe, but for the owners of DD2 who need to play in CSW 2.5 compatibility mode, especially for Project Cars 2, the issue I reported on September 1 is still not resolved. As a reminder, in CSW 2.5 mode, the ITM menu has disappeared since version 1.54.4 of Fanalab. I own a DD2 podium provided with a display that only partially works for one month and a half. So please i would like to know when you plan a fix for that. It worked before, it must work again.
Regards
Missing ITM in Comp mode is a known issue and will be fixed in the next version. No ETA when a new version is ready though.
Thank you for your succinct answer. However, it does not tell me how long will it take, and considering that we are talking about premium material, it's just a pity.
So let's be patient, since we have to
Good afternoon, I don't know if this is happening to me, it has already been exposed in the forum.
In iracing, when I am in practice or qualy, and time is up and I am driving, the quali or practice session closes, I stay on the main screen with the vibration motors, as they were at the time of closing.
Greetings