Hey there, it's been a while since my first call for help. Thanks for answering. Unfortunately, I'm still experiencing the same problem. I've rid my computer of everything Fanatec, then started fresh once again with Fanalab v1.57.4.0, driver 423, and the latest firmware for my DD1, motor, and F1 v2 wheel. When I open Fanalab, the program seems to detect my DD1 (Although the picture doesn't show up anymore), but the tuning menu is unavailable. Also, in the Game Profile tab the following are greyed-out and unavailable: Tuning Menu, Dynamic FFB, and ITM. The system is on, in PC mode, and works when I manually load a profile via the base/wheel interface....excluding Fanalab from the process. This is not ideal for switching between racing programs. Any ideas? Anyway, I hope this helps narrow down some of the bugs. Thanks again for the help.
Looks like you use the CSP via USB (for an unknown reason).
If using USB pedals then you have to manually select "Auto Detect" for the (Wheel Base) Connection slot, this way the Wheel Base connection gets disabled so you have control over your USB pedals.
But I would suggest to use the pedals via RJ12 connection to the wheel base directly anyway...
Hello , since I have upgraded to Fanalab Version 1.57.4 I get a strange problem. I am running Pyrofrog Dashpanel and another application called "Second Monitor" together with Assetto Corsa Competizione. The problem show that Dashpanel and SEcond monitor won't update their screens when I have ACC in focus. If I take it off focus sometimes the screens start to update again. If I close Fanalab the applications start to work againb but I loose the configured LEDs on the Formula V2 wheel (using CSL DD) Looks there is some interference of Fanalab with these applications, Did somebody come across this. thanks for any help or comments.
bug: iRacing support for gap ahead and gap in back display on Podium Endurance module should be supported. I heard someone say there was no API for this but there is since it's supported by every overlay developer (Kapps, Racelab, etc) in their relatives.
i noticed in the last days, that my Fanalab seems to have some issues. Normally, one could adjust the steering lock on the Tuning Menu Tab. But i don't have the option for it anmymore on this Tab.The Fold-out Title "Clubsport Wheel Base V2.5" is there but when i click on it, no further options are shown. I can only adjust the Multi Position Switch Logic and the Brake Force on this tab. Is there a way to get the option back to adjust the steering lock?
I tried. However, Fanalab no longer recognizes hardware when I switch to Compatibility Mode. The background is that my virtual steering wheel in F1 2020 flutters back and forth like crazy on the curbs. I don't have the problem in Compatibility Mode. Unfortunately I cannot adjust the colors or RPM of the LEDs there, because Fanalab cannot find any hardware. The latest version of Fanalab does not help. Can someone help me?
When I'm testing new settings I've tried to get in the habit of saving them before I test them but don't always remember, last night being the most recent example where I lost some good settings because I never clicked save. Would be nice when changes have been made and not saved if Fanalab prompted you to save them when you switch game profiles or exit the software. Thanks for a nice program, I also use it for games that are not natively supported and it seems to work fine.
F1 2021 was relaesed in July and Fanalab still does not support the current 2021 telemetry format yet. This is really frustrating because I can either use my telemetry tools (with the 2021 format) or Fanalab.
Do you have any news about updating Fanalab for the F1 2021 telemetry?
Comments
Hey there, it's been a while since my first call for help. Thanks for answering. Unfortunately, I'm still experiencing the same problem. I've rid my computer of everything Fanatec, then started fresh once again with Fanalab v1.57.4.0, driver 423, and the latest firmware for my DD1, motor, and F1 v2 wheel. When I open Fanalab, the program seems to detect my DD1 (Although the picture doesn't show up anymore), but the tuning menu is unavailable. Also, in the Game Profile tab the following are greyed-out and unavailable: Tuning Menu, Dynamic FFB, and ITM. The system is on, in PC mode, and works when I manually load a profile via the base/wheel interface....excluding Fanalab from the process. This is not ideal for switching between racing programs. Any ideas? Anyway, I hope this helps narrow down some of the bugs. Thanks again for the help.
-Jay
Minor flaw FL 1.57.4.0
there could be something wrong with maximize window function, window lose content
triple, 2070, Nvidia surround, win10, driver 472
Hi,
Since installing 1.57.4 my Clubsport pedals aren't detected anymore. Instead, CSL Elite pedals are shown, making my device unusable.
Serge
Looks like you use the CSP via USB (for an unknown reason).
If using USB pedals then you have to manually select "Auto Detect" for the (Wheel Base) Connection slot, this way the Wheel Base connection gets disabled so you have control over your USB pedals.
But I would suggest to use the pedals via RJ12 connection to the wheel base directly anyway...
After installing Windows 11, Fanalab nor Fanatec Control panel don't recognize any device anymore.
You need to reinstall the driver with the wheel powered on (as after every big Windows Update since years)
You are correct. Disconnected USB.
Thanks,
Serge
Indeed. It works now.
Thanks,
Serge
Hello , since I have upgraded to Fanalab Version 1.57.4 I get a strange problem. I am running Pyrofrog Dashpanel and another application called "Second Monitor" together with Assetto Corsa Competizione. The problem show that Dashpanel and SEcond monitor won't update their screens when I have ACC in focus. If I take it off focus sometimes the screens start to update again. If I close Fanalab the applications start to work againb but I loose the configured LEDs on the Formula V2 wheel (using CSL DD) Looks there is some interference of Fanalab with these applications, Did somebody come across this. thanks for any help or comments.
Thanks - but i got a dd1 with ps4 compatibility
bug: iRacing support for gap ahead and gap in back display on Podium Endurance module should be supported. I heard someone say there was no API for this but there is since it's supported by every overlay developer (Kapps, Racelab, etc) in their relatives.
Hi all,
i noticed in the last days, that my Fanalab seems to have some issues. Normally, one could adjust the steering lock on the Tuning Menu Tab. But i don't have the option for it anmymore on this Tab.The Fold-out Title "Clubsport Wheel Base V2.5" is there but when i click on it, no further options are shown. I can only adjust the Multi Position Switch Logic and the Brake Force on this tab. Is there a way to get the option back to adjust the steering lock?
Hey guys,
is it possible to change the LED colour from Formula V2.5 with CSL DD in compatibility mode?
Best regards
Yes.
Thanks, i´ll try :)
I tried. However, Fanalab no longer recognizes hardware when I switch to Compatibility Mode. The background is that my virtual steering wheel in F1 2020 flutters back and forth like crazy on the curbs. I don't have the problem in Compatibility Mode. Unfortunately I cannot adjust the colors or RPM of the LEDs there, because Fanalab cannot find any hardware. The latest version of Fanalab does not help. Can someone help me?
I am having trouble downloading these profiles. Chrome says "Failed - No file".
Forum links are broken since a month or so.
I have posted them either somewhere here in the thread again or in the Share Thread.
When I'm testing new settings I've tried to get in the habit of saving them before I test them but don't always remember, last night being the most recent example where I lost some good settings because I never clicked save. Would be nice when changes have been made and not saved if Fanalab prompted you to save them when you switch game profiles or exit the software. Thanks for a nice program, I also use it for games that are not natively supported and it seems to work fine.
Hey guys,
F1 2021 was relaesed in July and Fanalab still does not support the current 2021 telemetry format yet. This is really frustrating because I can either use my telemetry tools (with the 2021 format) or Fanalab.
Do you have any news about updating Fanalab for the F1 2021 telemetry?
Can I make fanalab load/install 5 different setups into the 5 wheel slots for the WRC?
when I load one it seems to go into all 5 slots
Mhm? When you save a profile to Setup ID 3 and you load that profile then only Setup 3 Settings will be overwritten.
So yes of course you can save and load 5 Setups individually..
I mean specifically the inbuilt gameprofiles.
I want to load 5 separate profiles to test in any racing game by switching on the wheel between profiles.
The recommended profiles will always use Setup ID 1. This cant be changed.
You can always save any settings you want to all the Setups.
New FanaLab 1.60.1 available. Please continue posting your feedback in the new thread.