Hello World! Looking for the latest recommended config for Podium Wheel Base DD2 and ClubSport Pedals V3, for use in iRacing. Much thanks ahead of time.
Hi, I would like to reduce the effect of force when driving over high curbs, like on the nordschleife in iRacing. what setting/s should I change for this? Is it to reduce the Damper (DPR)? Thanks.
Hello, Iracing has a setting in Force Feedback called Intensity with a default setting of 50%. Like Smoothing, I didn't see it listed for in-game settings. Could you give a recommendation for this, I have a csl dd wheel wheel base.
That is ONLY for the "Auto" FFB button which is not recommended to be used.
Recommendation remains to not use "Auto" FFB feature, therefore the Intensity setting is iireleevant as its not being used other than for the "Auto" FFB feature, hence no new recommended setting for it.
Hello Maurice Böschen,The device I am using is the podium DDF1，
During the process of playing iracing, if the steering wheel angle in the game is the same as the setting of the podium base, it will cause the soft lock to be ineffective
In a race, when the tire is pressed onto a high shoulder, the soft lock will lose its function，Must be recalibrated before proceeding，Resetting the vehicle does not work，Please answer for me，thank you。
i would say yes, it is still a good baseline, but the force feedback on 90 is overly excessive with the current driver, i'm not sure how it was at the original post's date. i use between 35-40 with gt4 cars.
An update would be nice for current drivers and settings available in the tuning/ingame menus.
Boosted Media got a special Python Script for his review, nothing for the mass market.
The feature first needs to be implemented natively into the games, iRacing will be the first, yes, but no ETA when they will implement the FullForce feature into the game.
I switched from CSL DD 8NM to CS DD. I've got the latest firmware installed. What I noticed during testing in iRacing is that there is very little change in feel after playing with settings like damper, and interpolation filter compared to csl dd which were quite noticeable. Is that normal? I run close to the recommended settings
Also, there is no longer an option for peak/linear mode, why is that?
Another thing I noticed is that while holding force is very good, all the ffb details feels a bit numb and jerky or just not as smoothly delivered compared to simucube2 or logitech g pro which I happen to try from time to time. Is there going be to firmware updates to address it?
Hello, I have a csl dd with driver 447 installed (not want to update). Could we know if the reccomended settings suggested are still fine? Or where I can find udated version?
I'm using the 8nm CSL DD in iRacing with the recommended settings. Is it normal for the wheel to start violently shaking/wobbling back and forth when going down a straight at speed? It doesn't seem to do this in other sims.
I am really struggling finding good settings on my fanatec csl elite wheelbase for Iracing, I was wondering if anyone might be able to help me set it up?
Comments
Interesting! Do you have any theories as to why this is the case or is this just what you've experienced?
Hello World! Looking for the latest recommended config for Podium Wheel Base DD2 and ClubSport Pedals V3, for use in iRacing. Much thanks ahead of time.
Available on page 1 of this thread.
Ok, thank you. Wasn't sure if that was updated. I assumed it was but just checking.
Just curious if you're still using these settings?
Ripping through Long Beach in an LMP2 with no damping makes me question how realistic it really is.
Hi, I would like to reduce the effect of force when driving over high curbs, like on the nordschleife in iRacing. what setting/s should I change for this? Is it to reduce the Damper (DPR)? Thanks.
Lowering the FEI from 100 down to 80 should help with this.
Hello, Iracing has a setting in Force Feedback called Intensity with a default setting of 50%. Like Smoothing, I didn't see it listed for in-game settings. Could you give a recommendation for this, I have a csl dd wheel wheel base.
Thanks
That is ONLY for the "Auto" FFB button which is not recommended to be used.
Recommendation remains to not use "Auto" FFB feature, therefore the Intensity setting is iireleevant as its not being used other than for the "Auto" FFB feature, hence no new recommended setting for it.
Hello Maurice Böschen,The device I am using is the podium DDF1，
During the process of playing iracing, if the steering wheel angle in the game is the same as the setting of the podium base, it will cause the soft lock to be ineffective
In a race, when the tire is pressed onto a high shoulder, the soft lock will lose its function，Must be recalibrated before proceeding，Resetting the vehicle does not work，Please answer for me，thank you。
Hello,
I have a problem with the recommended settings for the DD2.
Since the latest update of the drivers and firmware, the scale of the values in the sliders have changed.
I used to have the settings Gamer Muscle advised, but they went out the window with that update.
And the recommended settings on Page 1 don' t make any sense anymore too.
Podium Wheel Base DD2
Tuning Menu Settings:
SEN 1080 (shown as 108 on some displays)
FF 90
FFS Lin
NDP 16 (is this the percentage???, because now 0 to 100%)
NFR 2 %??? (also now 0 to 100 %)
NIN 8 %??? (also now 0 to 100 %)
INT 3 %??? (also now 0 to 100 %)
FEI 100
FOR 100
SPR 100*
DPR 100*
BLI User Preference
SHO 100 (not present anymore)
BRF User Preference (not present anymore)
Thx for the help!!
regards
Ivan
What do you mean?
Nothing has changed in the settings....
They always had this range
Okay then, I must have been confused. So I can use the settings as is? thx.
regards
Ivan
i would say yes, it is still a good baseline, but the force feedback on 90 is overly excessive with the current driver, i'm not sure how it was at the original post's date. i use between 35-40 with gt4 cars.
An update would be nice for current drivers and settings available in the tuning/ingame menus.
Can we get an update for recommended settings for the CS DD?
Thanks in advance
How to enable fullforce in iracing with CS DD?
LFE channel does not show wheel and doesnt work, trueforce doesnt work as well in both audio and physics mode
FullForce is currently not supported yet.
How can I test it? I saw boosted media testing in iracing and playing songs through it
You can not test it.
Boosted Media got a special Python Script for his review, nothing for the mass market.
The feature first needs to be implemented natively into the games, iRacing will be the first, yes, but no ETA when they will implement the FullForce feature into the game.
Thanks for answer!
I switched from CSL DD 8NM to CS DD. I've got the latest firmware installed. What I noticed during testing in iRacing is that there is very little change in feel after playing with settings like damper, and interpolation filter compared to csl dd which were quite noticeable. Is that normal? I run close to the recommended settings
Also, there is no longer an option for peak/linear mode, why is that?
Another thing I noticed is that while holding force is very good, all the ffb details feels a bit numb and jerky or just not as smoothly delivered compared to simucube2 or logitech g pro which I happen to try from time to time. Is there going be to firmware updates to address it?
There is no peak/linear option because it is redundant as Peak and Holding Forces on the CS DD are the same and it is always linear.
Hello, I have a csl dd with driver 447 installed (not want to update). Could we know if the reccomended settings suggested are still fine? Or where I can find udated version?
Thank you.
Still fine.
Nothing changed
thanks!
I'm using the 8nm CSL DD in iRacing with the recommended settings. Is it normal for the wheel to start violently shaking/wobbling back and forth when going down a straight at speed? It doesn't seem to do this in other sims.
Is it normal that, with "auto-detect mode", iRacing set 8Nm and not 12Nm for CS DD? It's not fully compatible yet?
iRacing did the same to me I had to change it manually to 12nm.
Yeah, same.
And strength I use 6.0-6.5
when will the settings for the new clubsport dd for iracing be released?
Hi guys,
Fanatec CSL elite ps4 user here
I am really struggling finding good settings on my fanatec csl elite wheelbase for Iracing, I was wondering if anyone might be able to help me set it up?
I would really appreciate some help with this.
Thanks, Josh