its a VERY powerful tool to control LEDs, Vibrations, adding additional FFB effects like a speed sensitive Dynamic Damper, saving hundreds of profiles which can also auto-load when you launch a game etc etc.
its everything but not messy if you got used to it.
Well if I use only 1 game and drive in VR (so no leds or stuff). The interest is for speed sensitive effects right ? Are they usefull and recommended ?
They can be really useful to prevent oscillation, yes.
Vibrations you would also feel in VR and that also adds immersion.
Let alone the possibility to save hundreds profiles for every car so you can fine tune the FFB for every car for perfection.. so also for Vr users FanaLab is very powerful.
I've seen I am not the only one with the Podium wheelbase switching pedals/shifters/handbrake axis around mid-race...
I literally just got my ps4 DD1 bundle yesterday afternoon and this problem showed its face withing the first hour of testing. It has happened a total of 3 times in the 2 hours or so I have used it. For some reason it likes to happen in the middle of a race. The first time I was in the middle of a corner and my car stalled...I was sliding around using the throttle and the car just crawled to a stop. I went to go push in the clutch to start it back up and it revved up like the throttle. I went to go check the input bindings and without touching any buttons, random things were popping up and disappearing every second or two. I switched the wheelbase on and off and it fixed the issue temporarily.
I also woke up this morning and heard a high pitched whine coming from my rig. I stuck my ear close to the podium base and power supply and I think it was coming from the supply. Is that normal?
I have V3 pedals, 1.5 shifter, handbrake and a BMW GT2 wheel.
Hi guys, I cannot understand why after the last iRacing update my DD2 got crazy! Everything was perfect before it... I have already installed and uninstalled the drivers and firmwares (all types, since the official v346 until the last beta v373) and just cannot play. After go out of the boxes with a car in a practice session and the FFB be forced (in a corner for example) the wheel just turn strongly by itself, the car crash and freeze. I do not know what to do anymore to solve it. Tried everything related to softwares, firmwares and drivers. What is happening? Anyone facing same difficulties? Thanks, Luiz from Brazil.
Good morning, for a few days I encountered this problem on the display of my dd1 purchased about 2 weeks ago. (I attach photos). Has anyone had the same problem? if you how managed to solve? display them you see in a faulty way sometimes you and other times you do not.
A week ago i received my Fanatec Podium F1 PS4. After approximately 2 hours of operation the left steering wheel paddle (downshift) stopped working after setting sets for Gran Turismo Sport. I have tried to contact the support team (via) ticket but i can't do it. See attached image.
Hi everyone, a few months ago some of you very kind had explained to me the various values what they need and what they change and a more or less fair value .. but I can't find the message anymore ... someone help me? because I don't find anything
Comments
Thx Maurice!
Is there any added benefits in using Fanalab?
I find it pretty messy tbh!
And thx guys for your inputs. DD1 delivered and installed with latest beta drivers . Absolutely flawless install and great feeling ootb ! I love it !
No I'm kinda lost on how to know what FF and in-game FF strength to use for each car...
And wish a could lower the crash peak torque 😱😱
Pretty messy? Lol.
its a VERY powerful tool to control LEDs, Vibrations, adding additional FFB effects like a speed sensitive Dynamic Damper, saving hundreds of profiles which can also auto-load when you launch a game etc etc.
its everything but not messy if you got used to it.
Well if I use only 1 game and drive in VR (so no leds or stuff). The interest is for speed sensitive effects right ? Are they usefull and recommended ?
They can be really useful to prevent oscillation, yes.
Vibrations you would also feel in VR and that also adds immersion.
Let alone the possibility to save hundreds profiles for every car so you can fine tune the FFB for every car for perfection.. so also for Vr users FanaLab is very powerful.
Ok I'll give it a try then.
Thx👍
As for vibration I only have the csl elite with load cell so I suppose it's just the wheel vibrating right ?
I've seen I am not the only one with the Podium wheelbase switching pedals/shifters/handbrake axis around mid-race...
I literally just got my ps4 DD1 bundle yesterday afternoon and this problem showed its face withing the first hour of testing. It has happened a total of 3 times in the 2 hours or so I have used it. For some reason it likes to happen in the middle of a race. The first time I was in the middle of a corner and my car stalled...I was sliding around using the throttle and the car just crawled to a stop. I went to go push in the clutch to start it back up and it revved up like the throttle. I went to go check the input bindings and without touching any buttons, random things were popping up and disappearing every second or two. I switched the wheelbase on and off and it fixed the issue temporarily.
I also woke up this morning and heard a high pitched whine coming from my rig. I stuck my ear close to the podium base and power supply and I think it was coming from the supply. Is that normal?
I have V3 pedals, 1.5 shifter, handbrake and a BMW GT2 wheel.
Hi Douglas,
Better create a support ticket from your products page on the website.
If you have a video of the issue to attach within your support ticket will be even better cause it is going to save you a few emails back and forth.
We recently upgraded to 373.
I use DD1 + Universal Hub + Porsche Button Modulebox.
Button module box is not recognized. It is recognized only as Universal Hub.
Hi,
what wheel is good and without issues. Is the Porsche Podium 911 GT3 a good one with the DD1?
Bernd
Yes
do i have to activate ITM for the wheel still? in old driver there was a REG file. In the 373 Beta Drivers and 1.47 Fanalab there is no on.
Bernd
No, working out of box.
Hi guys, I cannot understand why after the last iRacing update my DD2 got crazy! Everything was perfect before it... I have already installed and uninstalled the drivers and firmwares (all types, since the official v346 until the last beta v373) and just cannot play. After go out of the boxes with a car in a practice session and the FFB be forced (in a corner for example) the wheel just turn strongly by itself, the car crash and freeze. I do not know what to do anymore to solve it. Tried everything related to softwares, firmwares and drivers. What is happening? Anyone facing same difficulties? Thanks, Luiz from Brazil.
Can you help me ? I just bought new 3/4 months ago now I see this imperfection
it’s possible to solve this?
thank you
Open a support ticket from Fanatec site under “My products” section.
I would call those imperfections reasonable enough to ignore them tbh. If your wheel is working properly why bother with this?
I also have a minimal imperfection in my DD1 base, did not bother me at all.
Good morning, for a few days I encountered this problem on the display of my dd1 purchased about 2 weeks ago. (I attach photos). Has anyone had the same problem? if you how managed to solve? display them you see in a faulty way sometimes you and other times you do not.
It’s broken and you need to contact the support,
thank you Maurice
A week ago i received my Fanatec Podium F1 PS4. After approximately 2 hours of operation the left steering wheel paddle (downshift) stopped working after setting sets for Gran Turismo Sport. I have tried to contact the support team (via) ticket but i can't do it. See attached image.
As you can see, i have done firmware update, but it has not fixed the problem
Hi everyone, a few months ago some of you very kind had explained to me the various values what they need and what they change and a more or less fair value .. but I can't find the message anymore ... someone help me? because I don't find anything
Hello?
When you start FORZA MOTOR SPORTS7 on XBOX SERIES X with PS4 DD1, you'll be surprised.
The wheel moves tremendously from side to side.
PS4 DD1 or my hand or my child is afraid of getting hurt.
I attach the video.
Thank you~
*DRV:V380
Wheel Base:679
Motor fiemware:40
Quick Release Fiemware:6
Does the Podium Racing Wheel F1 use the DD1 base, the DD2 base, or another base?
DD1 with ps4 Chip.
Hi Manuel, do you mean the INT and FEI settings by chance?
Any chance you mean the filters INT and FEI?
Yes ! I have the same issue. No answer from Fanatec yet.